GLUAL electrical components Germany GLUAL model GLUAL price

GLUAL electrical components are constituent parts of electronic components and small electrical machines and instruments; they often consist of several parts and are interchangeable within similar products. The term commonly refers to certain parts in the electrical appliance, radio, and instrumentation industries. In practice, electronic components is the collective term for components and devices.

GLUAL electrical component classification

Fuses can be divided into high-voltage fuses and low-voltage fuses according to the operating voltage. According to the protected object, they can be classified as fuses for protecting transformers and general electrical equipment, fuses for protecting voltage transformers, fuses for protecting power capacitors, fuses for protecting semiconductor components, fuses for protecting motors, and fuses for protecting household appliances. According to structure, they can be divided into open, semi-enclosed, cartridge, and expulsion fuses. Open fuses have a simple structure, with the fusible element fully exposed to the air and supported by porcelain pillars without a base, making them suitable for low-voltage outdoor use. When interrupting current, they produce significant noise and light in the atmosphere. In semi-enclosed fuses, the fusible element is mounted on a porcelain frame and inserted into a porcelain box with metal sockets at both ends, making them suitable for low-voltage indoor use. The noise and light generated during current interruption are contained by the porcelain box. In cartridge fuses, the fusible element is installed inside the fuse body. It is then inserted into a base or directly connected into the circuit for use. The fuse link is a fully sealed insulating tube with metal caps or contact blades at both ends. If the insulating tube of this type of fuse is filled with quartz sand, it has a current-limiting effect when interrupting current, greatly increasing the breaking capacity; hence, it is also called a high-breaking-capacity fuse. If the tube is evacuated, it is called a vacuum fuse. If the tube is filled with SF6 gas, it is called a SF6 fuse, the purpose of which is to improve arc-extinguishing performance. Since quartz sand, vacuum, and SF14 gas all have good insulation properties, this type of fuse is suitable for both low-voltage and high-voltage applications. Expulsion fuses have the fusible element installed in an insulating tube made of solid gas-generating material. The solid gas-generating material can be electrical pressboard or organic glass. When short-circuit current passes through the fusible element, it melts immediately, creating an arc. The high-temperature arc causes the solid gas-generating material to rapidly decompose, producing a large amount of high-pressure gas, which expels the ionized gas and arc from both ends of the tube, emitting intense noise and light, and extinguishing the arc when the AC current crosses zero, thereby interrupting the current. The insulating tube is usually mounted on an insulating support to form the complete fuse assembly. Sometimes the upper end of the insulating tube is designed to be movable, detaching and dropping down immediately after current interruption. This type of expulsion fuse is commonly known as a drop-out fuse.

GLUAL electrical component principle

An AC power supply that provides stable voltage and frequency is called an AC stabilized power supply. Most domestic manufacturers focus on AC voltage stabilization. Below is a brief description of the classification and characteristics of available AC stabilized power supplies in the market. Parameter adjustment (resonance) type: The basic principle of voltage stabilization for this type of power supply is LC series resonance. Early magnetic saturation stabilizers belong to this category. Its advantages are: simple structure, few components, high reliability, wide voltage stabilization range, and strong anti-interference and overload resistance. Disadvantages include: high energy consumption, high noise, heavy weight, and high cost.

GLUAL electrical component principle

The alternating current generated by an automotive alternator is converted into direct current by a rectifier, but its waveform still exhibits irregular fluctuations, which directly affects the accuracy of vehicle ignition. The output voltage cannot remain relatively constant, causing variations in spark plug ignition energy, which can easily lead to engine vibration, gear shift jerkiness, slow and weak acceleration, unstable idle speed, and low efficiency of the automotive air conditioning system. This significantly reduces the performance and service life of onboard electrical equipment. Additionally, aging circuit systems in older vehicles and increased circuit impedance make the impact on the vehicle increasingly apparent. The role of an electronic rectifier is to help eliminate harmonic interference in the vehicle, stabilize output voltage, improve the instantaneous discharge capability of the power system, increase torque output, accelerate throttle response, extend battery life, shorten engine start time, and improve ignition efficiency, with particularly noticeable effects on small-displacement vehicles. A semiconductor PN junction conducts high current under forward bias and very low current under reverse bias. A rectifier diode is a PN junction diode that utilizes this unidirectional conductivity of the PN junction to convert alternating current into direct current. Devices with a current capacity below 1 ampere are typically referred to as rectifier diodes, while those above 3 amperes are called rectifiers. Common semiconductor rectifiers include silicon rectifiers and selenium rectifiers, available in many specifications, with voltages ranging from tens to thousands of volts and currents from a few amperes to thousands of amperes. Rectifiers are widely used in various forms of rectified power supplies. High-power rectified power supplies require rectifiers with high current capacity, high breakdown voltage, and good heat dissipation. However, such devices have large junction areas and high junction capacitance, resulting in very low operating frequencies, generally below tens of kilohertz. Silicon material has a larger bandgap and good thermal conductivity, making it suitable for manufacturing high-power rectifier devices. High-voltage silicon stacks are often used in high-voltage rectification installations. They consist of multiple rectifier die connected in series. Their reverse withstand voltage is determined by the withstand voltage of the die and the number of series-connected die, with maximum withstand voltages reaching hundreds of kilovolts. If a high-frequency rectifier circuit is used at very high frequencies, when the period of the AC voltage is comparable to the recovery time of the rectifier from on-state to off-state, the rectifier no longer functions effectively for high-frequency voltage. To adapt to high-frequency operation, gold doping is typically used in silicon rectifiers to shorten the lifetime of injected minority carriers, thereby reducing recovery time. To reduce the possibility of damage due to overvoltage breakdown and improve the reliability of rectification devices, silicon avalanche rectifiers can be used. In such devices, when the reverse voltage exceeds the allowable peak value, uniform avalanche breakdown occurs across the entire PN junction, allowing the device to operate under high voltage and high current, thus withstanding considerable reverse surge power. Manufacturing these devices requires materials with few defects, uniform resistivity, and flat junction surfaces. Exposed junction areas should also be properly protected to prevent surface breakdown. Selenium rectifiers have high overload capacity and strong ability to withstand reverse surge power. In the two basic types of rectifiers based on high-power diodes or thyristors, high-voltage AC power from the grid is converted into DC power by the rectifier.

Weidou Intelligent Technology specializes in selling German GLUAL connectors, GLUAL switches, GLUAL relays, GLUAL controllers, GLUAL plugs, GLUAL sensors, GLUAL resistors, GLUAL capacitors, GLUAL bus systems, GLUAL modules, GLUAL cables, GLUAL power supplies, GLUAL interfaces, GLUAL gateways, GLUAL circuit breakers, GLUAL original imports from Germany. We welcome inquiries and orders from users.