German WINTERTHUR TECHNOLOGIE tools, WINTERTHUR TECHNOLOGIE models, WINTERTHUR TECHNOLOGIE prices

WINTERTHUR TECHNOLOGIE tools are material handling equipment for lifting or jacking heavy loads, operating intermittently to raise weights. Most lifting tools begin a vertical or combined vertical and horizontal working stroke after the rigging picks up the load, unload at the destination, return empty to the pickup point to complete one work cycle, and then proceed with the second lift. Generally, during operation, picking up, moving, and unloading are performed sequentially, and the work of the corresponding mechanisms is intermittent. Lifting tools are mainly used for handling piece goods; when equipped with grabs, they can handle bulk materials such as coal, ore, and grain; when equipped with ladles, they can lift liquid materials such as molten steel. Some lifting tools, such as elevators, can also be used to carry people. In certain application scenarios, lifting equipment serves as the primary operational tool, for example, cranes used for loading and unloading materials at ports and stations are the main operational tools.

WINTERTHUR TECHNOLOGIE tool applications and usage

The electric hydraulic oil pump can serve as the hydraulic pump for various hydraulic devices. When paired with other hydraulic tools, the electric hydraulic oil pump enables operations such as lifting, pressing, pipe bending, bar bending, straightening, shearing, assembly, and disassembly, reducing labor intensity and improving work efficiency. During use, open the air release nut, open the valve on the oil manifold block, connect the power supply, and attach the quick coupler to the quick plug on the associated hydraulic device. Press the power switch; after the motor runs for 1-2 minutes, close the switch to engage the pressure boost state. At this point, the output hydraulic oil will perform the respective tasks, with pressure self-boosting as the load increases until reaching 63MPA. After work is completed, open the valve to relieve pressure. Once the hydraulic oil has fully returned, detach the quick coupler, tighten the air release nut, unplug the power cord, and close the valve.

WINTERTHUR TECHNOLOGIE tool selection guide

1) Distinguish between household and professional use based on needs. Most power tools are designed for professionals, so differentiate between professional and general household tools when purchasing. The difference usually lies in power: professional tools have higher power to reduce workload for professionals, while household tools handle smaller projects with less workload, so high input power is not required. 2) The outer packaging should have clear patterns, no damage, a sturdy plastic case, and durable latches. 3) The tool's appearance should have uniform color; plastic parts should have no visible flow marks or indentations, scratches, or impact marks. Assembly misalignment between housing parts should be ≤ 0.5mm. Aluminum castings should have a smooth, attractive coating without defects. The entire unit should be free of oil and stains. The switch handle should be flat when held. The cable length should generally be no less than 2 meters. 4) The nameplate parameters must match those on the CCC certificate. The manual should include the manufacturer's and factory's detailed address and contact information. The nameplate or certificate of conformity should include a traceable batch number. 5) Hold the tool, connect to power, and frequently operate the switch to start the tool repeatedly. Observe whether the switch's on/off function is reliable. Also, observe if there are any abnormalities in nearby televisions or fluorescent lights to confirm the tool is equipped with an effective radio interference suppressor. 6) Run the tool under power for one minute. While running, hold it by hand; there should be no noticeable abnormal vibration. Observe the commutation sparks; they should not exceed level 3/2. Generally, looking into the air inlet, there should be no obvious arcing on the commutator surface. There should be no abnormal noise during operation.

WINTERTHUR TECHNOLOGIE tool types and features

Hydraulic tools include: hydraulic wrenches, electric pumps for hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer high efficiency and convenience. 1) They generally use mineral oil as the working medium, allowing self-lubrication of relative moving surfaces and long service life. 2) Lightweight, compact, low motion inertia, and fast response. 3) Various hydraulic transmission components can be arranged conveniently and flexibly as needed. 4) Automatic overload protection is achievable. 5) Easy operation and control, enabling wide-range stepless speed regulation (speed regulation range up to 2000: 1). 6) Linear motion is easily achieved. 7) Machine automation is easily realized; when using electro-hydraulic combined control, not only can a higher degree of automatic control be achieved, but remote control is also possible.

Weidou Intelligent Technology specializes in selling German WINTERTHUR TECHNOLOGIE workholding fixtures, WINTERTHUR TECHNOLOGIE hydraulic tools, WINTERTHUR TECHNOLOGIE power tools, WINTERTHUR TECHNOLOGIE pneumatic tools, WINTERTHUR TECHNOLOGIE hand tools, WINTERTHUR TECHNOLOGIE electronic tools, WINTERTHUR TECHNOLOGIE welding tools, WINTERTHUR TECHNOLOGIE piping tools, WINTERTHUR TECHNOLOGIE explosion-proof tools, WINTERTHUR TECHNOLOGIE electrical power tools, WINTERTHUR TECHNOLOGIE automotive maintenance tools, WINTERTHUR TECHNOLOGIE fastening tools, WINTERTHUR TECHNOLOGIE cutting tools, WINTERTHUR TECHNOLOGIE striking tools, WINTERTHUR TECHNOLOGIE grinding tools. All WINTERTHUR TECHNOLOGIE products are original imports from Germany. Customers are welcome to inquire and order.