German WINTERTHUR TECH tools, WINTERTHUR TECH models, WINTERTHUR TECH prices

WINTERTHUR TECH tools utilize electromagnetic technologies such as permanent magnets to assist in mechanical manufacturing processes. They can be categorized into magnetic fixtures, magnetic tools, magnetic molds, and magnetic auxiliary devices. The use of magnetic tools can significantly improve production efficiency and reduce the labor intensity of employees. For some workpieces, clamping is inconvenient during machining and assembly due to their structural characteristics. Simply position the U-shaped iron core vertically on the worktable for processing; by embedding a magnet in the positioning block of the fixture, the workpiece can be firmly adsorbed onto the worktable equipped with positioning blocks and accurately located. This greatly simplifies the fixture structure and improves work efficiency. Some products require welding small parts onto the workpiece; if accurate positioning is not achieved, it not only makes the work inconvenient but also fails to meet requirements.

WINTERTHUR TECH tool features

1) Air is easily accessible, operates at low pressure, and used air can be discharged locally without requiring recovery pipelines. 2) Air has low viscosity and minimal flow resistance loss, facilitating centralized air supply and long-distance transmission. 3) Pneumatic actuators offer high movement speeds. 4) Pneumatic systems have strong environmental adaptability, operating reliably in wide temperature ranges, humid, and dusty environments. Minor leaks do not pollute the environment, there is no risk of fire or explosion, and usage is safe. 5) Simple structure, easy maintenance, and low cost. 6) Long service life of pneumatic components. 7) Pneumatic components have lower output force compared to hydraulics, faster motion, strong adaptability, and can operate in harsh environments such as flammable, explosive, dusty, humid, and impact-prone areas. They do not pollute the environment, have a long service life, simple construction, easy maintenance, and low price.

WINTERTHUR TECH tool maintenance

1) Correct air supply system: The inlet pressure at the tool entrance (not the compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2). Pressure that is too high or too low will impair tool performance and lifespan. The intake air must contain sufficient lubricating oil to ensure adequate lubrication of the pneumatic motor inside the tool (place a white paper at the tool exhaust to check for oil stains; the presence of oil stains is normal). The intake air must be free of moisture; using compressed air without an air dryer is inappropriate. 2) Do not arbitrarily disassemble tool parts before operation, as this affects operator safety and may cause tool damage. 3) If the tool has minor faults or fails to achieve its original function after use, do not continue using it; inspect it immediately. 4) Regularly (approximately once a week) inspect and maintain the tool. Add Grease to rotating parts such as bearings, and add Oil to the pneumatic motor section. 5) When using various tools, strictly adhere to all safety regulations and operating instructions. 6) Select appropriate tools for the job. Tools that are too large can easily cause work injuries, while tools that are too small can easily lead to tool damage.

WINTERTHUR TECH tool usage

1) When placing the diamond dressing tool head into the holder, take care not to impact the grinding wheel surface. 2) Do not align the single-point diamond dressing tool head vertically with the center of the grinding wheel; it generally needs to be tilted by 10-15°. 3) Do not "quench" (suddenly cool) a heated dressing tool. During dry dressing, maintain sufficient interval time between dressings to allow the heated dressing tool to cool. 4) Do not assume the grinding wheel surface is ideally flat. At the start of dressing, identify the high points on the grinding wheel and proceed with dressing. 5) If possible, the material removal amount per dressing on the grinding wheel radius should not exceed 0.001 inches. Excessive removal can cause premature wear and frequent fracture of the diamond dressing tool head. 6) However, do not remove too little material each time. Grinding wheels used on old or poorly rigid machine tools may not require dressing. 7) Note that the dressing tool should not remain in one position for too long. This will polish the grinding wheel surface, generate high temperatures, and damage the diamond dressing tool. Rotate the dressing tool at least once a day. 8) Do not continue to use worn or damaged dressing tools. Adjust or replace them promptly. 9) Do not select excessive removal amounts and fast lateral feed rates during rough dressing, followed by small removal amounts and slow lateral feed rates during fine dressing. This will quickly damage the diamond dressing tool. If possible, it is recommended to select the same lateral feed rate for both rough and fine dressing.

Weidou Intelligent Technology professionally sells German WINTERTHUR TECH workpiece fixtures, WINTERTHUR TECH hydraulic tools, WINTERTHUR TECH power tools, WINTERTHUR TECH pneumatic tools, WINTERTHUR TECH hand tools, WINTERTHUR TECH electronic tools, WINTERTHUR TECH welding tools, WINTERTHUR TECH pipe tools, WINTERTHUR TECH explosion-proof tools, WINTERTHUR TECH electrical tools, WINTERTHUR TECH automotive maintenance tools, WINTERTHUR TECH fastening tools, WINTERTHUR TECH cutting tools, WINTERTHUR TECH striking tools, WINTERTHUR TECH grinding tools. All WINTERTHUR TECH products are original imports from Germany. Customers are welcome to inquire and order.