German witt gasetechnik tools, witt gasetechnik models, witt gasetechnik prices

witt gasetechnik tools are any tools connected to the edge (joint) of a robot with specific functions. This may include robot grippers, robot tool changers, robot collision sensors, robot rotary unions, robot pressure tools, compliance devices, robot spray guns, robot deburring tools, robot arc welding torches, robot electric welding torches, etc. Robot end-effectors are generally considered peripheral equipment of the robot, robot accessories, robot tools, or arm-end tools (EOA). Mechanical clamping end-effectors used in industrial loading and unloading robots are mostly two-finger claw types. Classified by finger motion, they can be divided into translational and rotational types. Classified by mechanical clamping method, they can be divided into external clamping and internal expanding types. Classified by mechanical structural characteristics, they can be divided into electric (electromagnetic), hydraulic, and pneumatic types, as well as their combinations.

witt gasetechnik tool classification

1) Electric planer: One of the main tools used in woodworking and renovation. It is mainly used for planing flat and straight surfaces of various woods. Products are divided into short planers and rough planers. Rough planers are mainly used for planing flat wood surfaces and can process relatively large board surfaces; short planers, in addition to board surface planing, can be used with various guide plates for planing tongues and grooves, borders, and slotting. The main features of using a handheld electric planer are small size, light weight, portability, and ease of use. Compared with manual tools, it can greatly reduce labor intensity and improve processing efficiency and quality. When using a handheld electric planer, hold the handle at the rear of the planer body with your right hand and slightly raise the center of gravity of the rear. After starting the power with your left hand, hold the guide handle at the front of the planer, keeping the front center of gravity lower. Follow the operation sequence where the front of the planer contacts the wood first. When the rear center of gravity gradually and steadily contacts the planing surface, push the planer body forward smoothly in the direction of planing with both hands. After the planer body completes the planing stroke, lift the front of the planer with your left hand, then pick it up with both hands to return to the starting point for planing. Repeat this until all planing is completed. 2) Jigsaw: Also known as electric coping saws or electric fine saws. It is a multifunctional cutting tool that can cut wooden boards, as well as perform straight or curved cutting on plastic and metal sheets. It is particularly suitable for cutting complex shapes and geometric figures with small radii of curvature. It is an essential multifunctional sawing tool for home renovation and various public interior decoration projects. It features light weight, small size, portability, simple operation, and wide application range. Its cutting principle involves a narrow saw blade with teeth facing upward. During operation, the blade moves in a linear reciprocating motion up and down to cut, completing various sawing tasks according to size requirements. If used with a guide plate, it can also perform angled bevel processing. When using an electric jigsaw, for smaller and thinner wooden boards, fix them to the workbench first and support the workpiece with your left hand. Then, hold the saw handle with your right hand and push forward slowly for sawing. Apply steady and uniform force; do not use excessive force to avoid injury or damaging the blade. For larger boards, ensure the board is fixed steadily, then hold the saw handle with both hands and push forward for sawing. Follow the line during sawing and always keep the blade perpendicular to the board surface to prevent binding or jamming. 3) Circular saw: Also known as a small handheld circular saw. It is a new type of small handheld electric saw equipped with a spring-loaded automatic safety guard and an electronically controlled constant-speed motor. It features simple operation, flexible use, quick adjustment, and safety reliability. It is very suitable for home renovation tasks such as cutting various wooden boards and fiberboards. The thickness of wood or boards being cut should generally be below 60mm. 4) Sanding tools: Also known as small handheld grinders. They are mainly used for sanding bare wood before painting various wood veneers, and can also be used for sanding putty coatings. However, sanding putty generates significant dust, which seriously pollutes the environment, so enhanced labor protection is required during operation. Handheld grinders include belt sanders and orbital sanders. Belt sanders are mainly used for rapid sanding of wooden components and products, while orbital sanders are commonly used for sanding large areas such as wooden floors in home renovations. 5) Small engraving machine: Also known as a groove planer or trimmer. It can be used for slotting, tenoning, drilling, trimming, milling, and edging on various wooden products and components. It can also be used for simple trimming, milling, grooving, and edging on light metal materials such as aluminum alloy and plastic steel, such as aluminum alloy (or plastic steel) doors and windows, balcony frames, and furniture frames. Therefore, it is also one of the commonly used power tools in modern home renovation projects.

witt gasetechnik tool precautions

Large saws are commonly used for thick and wide boards; small saws are commonly used for narrow and thin wood; coarse saws are commonly used for cross-cutting; fine saws are commonly used for tenons and shoulders. Saw blades with larger set are required for hardwoods and wet wood, while saw blades with smaller set are required for softwoods and dry wood. When using saws, attention must be paid to safe operating methods for each type: 1) Before using a frame saw, adjust the blade angle with the knob. Conventionally, it should form an angle of 45° with the plane of the wooden frame. Tighten the tension rope with the toggle to keep the blade straight and taut. When starting the cut, hold the saw handle firmly with your right hand and place your left hand at the starting point. Push and pull gently a few times. Do not apply excessive force. Do not twist left or right during sawing. Apply heavier pressure on the push stroke and lighter pressure on the pull stroke, maintaining a uniform rhythm. When nearing the end of the cut, hold the part to be cut off steady with your hand. Loosen the blade after use and hang it in a secure location. 2) When using a crosscut saw, apply balanced force with both hands to prevent the saw from drifting towards the side with greater force. When correcting a skewed cut, do so slowly to prevent binding or breaking the blade. 3) When using a wire saw, do not pull too forcefully or too quickly to avoid breaking the wire. During sawing, the operator's head must not be positioned above the upper end of the bow frame to avoid facial injury from a snapping wire. 4) Regularly check the sharpness of the blade and the stability of the saw frame and handle. Repair blades with dull or uneven teeth promptly. Repair or restore damaged ropes, nuts, knobs, handles, and wooden frames before continuing use.

witt gasetechnik tool usage

1) Inspect carefully before use. Ensure there is no external damage, the switch operates flexibly without sticking, and the power cord and tool housing are intact. Use a 500V megohmmeter to measure the insulation resistance between the winding and the housing, which must not be less than O.5 megohms. See the attached table for insulation resistance values. 2) Handheld power tools with metal housings must have a reliable protective grounding wire. The power cord should be a multi-core soft rubber sheathed cable, and the grounding wire connections at both ends must be secure. 3) Handheld power tools should be used by dedicated personnel with appropriate professional knowledge. Strictly adhere to relevant safety operating procedures during use. 4) Before use, check whether the relevant electrical and mechanical protective devices are intact and functioning normally. Also ensure that rotating parts move flexibly without sticking. 5) When using Class I handheld power tools, users must wear prescribed protective equipment and use qualified protective gear. Take appropriate anti-electric shock safety measures as required, such as installing residual current devices (RCDs) in the power circuit, or wearing insulating gloves and shoes, or standing on an insulating mat. When using Class II handheld power tools in damp and confined spaces, install a leakage switch with a working current of less than 1.5mA and an operating time of less than or equal to 0.1 seconds. The leakage switch should be placed inside the container and monitored by a dedicated person. 6) Occupational hazards of using handheld power tools. Arm vibration disease caused by long-term exposure to hand-transmitted vibration was listed as one of China's statutory occupational diseases in 1957, also known as local vibration disease, typically manifested as episodic white finger.

Weidou Intelligent Technology specializes in selling German witt gasetechnik workholding fixtures, witt gasetechnik hydraulic tools, witt gasetechnik power tools, witt gasetechnik pneumatic tools, witt gasetechnik hand tools, witt gasetechnik electronic tools, witt gasetechnik welding tools, witt gasetechnik pipe tools, witt gasetechnik explosion-proof tools, witt gasetechnik electrical tools, witt gasetechnik automotive maintenance tools, witt gasetechnik fastening tools, witt gasetechnik cutting tools, witt gasetechnik striking tools, witt gasetechnik grinding tools. All witt gasetechnik products are original imports from Germany. Welcome inquiries and orders from customers.