gastroback electrical components, German gastroback models, gastroback prices

gastroback electrical components are surge absorbers/varistor assemblies. Due to their nonlinear resistance change with voltage, they exhibit symmetry in both directions (positive and negative). They respond to abnormal voltages on the line, absorbing most of the surge energy while suppressing the abnormal voltage to a safe range, thereby improving line safety and stability. In standby mode, surge absorbers (varistors) have very high impedance (several megaohms) relative to the protected electronic components and do not affect the characteristics of the original circuit design. However, when an instantaneous surge voltage occurs (exceeding the breakdown voltage of the surge absorber), the impedance of the surge absorber drops low (to only a few ohms), causing a short circuit in the line, thus protecting electronic products or more expensive components.

gastroback electrical component features

The main characteristics of thermistors are: (1) high sensitivity, with a resistance temperature coefficient larger than that of metals; (2) wide operating temperature range; (3) small size, capable of measuring temperatures in gaps, cavities, and blood vessels within living organisms that other thermometers cannot measure; (4) ease of use; (5) easy to process into complex shapes for mass production; (6) good stability and strong overload capacity.

gastroback electrical component characteristics

Sensitivity refers to the ratio of the change in output to the change in input of a sensor under steady-state operating conditions. It is the slope of the output-input characteristic curve. If the relationship between the sensor's output and input is linear, then the sensitivity S is a constant. Otherwise, it will vary with changes in the input. The dimension of sensitivity is the ratio of the dimensions of the output and input quantities. When the dimensions of the sensor's output and input are the same, sensitivity can be understood as the amplification factor. Increasing sensitivity yields higher measurement accuracy. However, the higher the sensitivity, the narrower the measurement range, and often the poorer the stability.

gastroback electrical component composition

A two-terminal electronic component made of resistive material, with a specific structural form, used in circuits to limit current flow. Those with fixed resistance values are called fixed resistors. Those with variable resistance values are called potentiometers or variable resistors. An ideal resistor is linear, meaning the instantaneous current through the resistor is proportional to the applied instantaneous voltage. Some special resistors, such as thermistors, varistors, and sensitive elements, have a nonlinear relationship between voltage and current. Resistors are the most numerous components in electronic circuits, typically available in various series based on power and resistance values for selection by circuit designers. In circuits, resistors are mainly used to adjust and stabilize current and voltage; they can serve as shunts and voltage dividers, or as matching loads for circuits. Depending on circuit requirements, they can also be used for negative or positive feedback in amplifier circuits, voltage-to-current conversion, or as voltage/current protection elements during input overload. They can also form RC circuits to serve as oscillation, filtering, bypass, differentiation, integration, and time constant elements.

Weidou Intelligent Technology specializes in selling German gastroback connectors, gastroback switches, gastroback relays, gastroback controllers, gastroback plugs, gastroback sensors, gastroback resistors, gastroback capacitors, gastroback buses, gastroback modules, gastroback cables, gastroback power supplies, gastroback interfaces, gastroback gateways, and gastroback circuit breakers. All gastroback products are original imports from Germany. Customers are welcome to inquire and place orders.