hensel electrical components German hensel models hensel prices

hensel electrical components include resistors, capacitors, inductors, diodes, transistors, field-effect transistors, thyristors, transformers, relays, sensors, etc.; electronic devices include analog circuits (operational amplifiers, comparators, signal conditioners), logic circuits (flip-flops, counters, decoders, registers, transceivers, NOT gates, AND gates, OR gates, NAND gates, NOR gates, XOR gates), microcontrollers, memory, digital potentiometers, signal conversion circuits (A/D converters, D/A converters, voltage-to-frequency converters), communication circuits (various interface circuits), monitoring and reset circuits (power supply monitoring, program monitoring)... too numerous to count.

hensel electrical component features

LED lamps are light-emitting diodes that use solid-state semiconductor chips as the light-emitting material. Compared with traditional lamps, LED lamps are energy-efficient, environmentally friendly, and offer good color rendering and response speed. (1) Energy efficiency is the most prominent feature of LED lamps in terms of energy consumption; the energy consumption of LED lamps is one-tenth that of incandescent lamps and one-quarter that of energy-saving lamps. This is a major feature of LED lamps. People today advocate energy conservation and environmental protection, and it is precisely this energy-saving feature that has made the application range of LED lamps very wide and made LED lamps very popular. (2) Can operate in high-speed switching states. When we walk on the street, we find that every screen or image composed of LED is ever-changing. This shows that LED lamps can perform high-speed switching operations. However, the incandescent lamps we usually use cannot achieve such an operating state. In daily life, if the switch is operated too many times, it will directly cause the filament of the incandescent lamp to break. This is also an important reason why LED lamps are popular. (3) Environmental protection: LED lamps do not contain any heavy metal materials such as mercury, whereas fluorescent lamps do, which reflects the environmental friendliness of LED lamps. People now attach great importance to environmental protection, so more people are willing to choose environmentally friendly LED lamps. (4) Fast response speed is another prominent feature of LED lamps, namely their relatively fast reaction speed. As soon as the power is connected, the LED lamp lights up immediately. Compared with the energy-saving lamps we usually use, their response speed is faster. When turning on traditional bulbs, it often takes a long time to illuminate the room, and they only light up after the bulb has completely heated up. (5) Compared with other light sources, LED lamps are "cleaner." The so-called "clean" does not refer to the cleanliness of the lamp surface and interior, but rather that this lamp is a cold light source, does not generate excessive heat, and does not attract insects that are attracted to light and heat. Especially in summer, there are many insects in rural areas. Some insects are naturally heat-loving; incandescent lamps and energy-saving lamps generate heat after being used for a period of time, and this heat is exactly what insects like, making it easy to attract them. This will undoubtedly bring many pollutants to the lamp surface, and insect excrement will also make the indoor environment very dirty. However, LED lamps are cold light sources and do not attract insects, so they do not produce insect excrement. Therefore, LED lamps are "cleaner." Semiconductor light-emitting diodes have a wide range of applications, low power consumption, long service life, and are low-carbon and environmentally friendly. The application of semiconductor light-emitting diodes in China is very widespread; many lighting devices in residential homes use semiconductor light-emitting diodes, and most street lights also use semiconductor light-emitting diode street lights as lighting sources. Some road lighting fixtures also combine solar technology, which can save a large amount of electrical energy. Photodiodes can be divided into gallium aluminum arsenide photodiodes, aluminum phosphide arsenide photodiodes, gallium phosphide photodiodes, and aluminum arsenide photodiodes, depending on the material.

hensel electrical component classification

1. By application: pressure-sensitive and force-sensitive sensors, position sensors, liquid level sensors, energy consumption sensors, speed sensors, acceleration sensors, radiation sensors, thermal sensors. 2. By principle: vibration sensors, humidity-sensitive sensors, magnetic-sensitive sensors, gas-sensitive sensors, vacuum degree sensors, biological sensors, etc. 3. By output signal: (1) Analog sensors convert the measured non-electrical quantities into analog electrical signals. (2) Digital sensors: convert the measured non-electrical quantities into digital output signals (including direct and indirect conversion). (3) Pseudo-digital sensors: convert the measured signal quantity into frequency signals or short-period signal outputs (including direct or indirect conversion). (4) Switch sensors: when a measured signal reaches a specific threshold, the sensor correspondingly outputs a set low-level or high-level signal. 4. By manufacturing process: Integrated sensors are manufactured using standard production processes for silicon-based semiconductor integrated circuits. Usually, part of the circuit used for preliminary processing of the measured signal is also integrated on the same chip. Thin-film sensors are formed by depositing thin films of corresponding sensitive materials on a dielectric substrate (base plate). When using hybrid processes, part of the circuit can also be fabricated on this substrate. Thick-film sensors are made by coating slurries of corresponding materials onto ceramic substrates, which are usually made of alumina, and then undergoing heat treatment to form the thick film. Ceramic sensors are produced using standard ceramic processes or certain variants (sol-gel, etc.). After appropriate preparatory operations, the formed elements are sintered at high temperatures. There are many common characteristics between thick-film and ceramic sensor processes; in some respects, the thick-film process can be considered a variant of the ceramic process. Each process technology has its own advantages and disadvantages. Due to the lower capital investment required for research, development, and production, as well as the high stability of sensor parameters, it is more reasonable to adopt ceramic and thick-film sensors. 5. By measurement objective: Physical sensors are made using the characteristic that certain physical properties of the measured substance undergo significant changes. Chemical sensors are made using sensitive elements that can convert chemical quantities such as the composition and concentration of chemical substances into electrical quantities. Biological sensors are made using various biological or biomaterial characteristics to detect and identify chemical components in living organisms. 6. By structure: (1) Basic sensors are the most fundamental single transformation devices. (2) Combined sensors are sensors composed of different single transformation devices. (3) Application-specific sensors are sensors composed of basic sensors or combined sensors together with other mechanisms. 15. By mode of action: They can be divided into active and passive sensors. Active sensors include acting-type and reaction-type. Such sensors can emit a certain detection signal to the measured object, detect changes produced by the detection signal in the measured object, or form a signal by generating a certain effect in the measured object by the detection signal. Those that detect changes in the detection signal are called acting-type, and those that detect the response formed to generate a signal are called reaction-type. Radar and radio frequency range detectors are examples of acting-type, while photoacoustic effect analysis devices and laser analyzers are examples of reaction-type. Passive sensors only receive signals generated by the measured object itself, such as infrared radiation thermometers and infrared imaging devices.

hensel electrical component parameters

Rated voltage: refers to the safe voltage allowed when the switch is operating normally. If the voltage applied across the switch exceeds this value, it will cause arcing and breakdown between the two contacts. Rated current: refers to the maximum safe current allowed to pass when the switch is closed. When this value is exceeded, the switch contacts will burn out due to excessive current. Insulation resistance: refers to the resistance value between the conductive part and the insulating part of the switch. Contact resistance: refers to the resistance value between each pair of contacts when the switch is in the closed state. Withstand voltage: refers to the highest voltage that the switch can withstand between the conductor and ground. Service life: refers to the number of operations the switch can perform under normal working conditions.

Weidou Intelligent Technology professionally sells German hensel connectors, hensel switches, hensel relays, hensel controllers, hensel plugs, hensel sensors, hensel resistors, hensel capacitors, hensel buses, hensel modules, hensel cables, hensel power supplies, hensel interfaces, hensel gateways, hensel circuit breakers, hensel original imports from Germany. We welcome customers to inquire and order.