panasonic electrical components German panasonic models panasonic prices

panasonic electrical components include resistors, capacitors, inductors, diodes, transistors, field-effect transistors, thyristors, transformers, relays, sensors...; electronic devices include analog circuits (operational amplifiers, comparators, signal conditioners), logic circuits (flip-flops, counters, decoders, registers, transceivers, NOT gates, AND gates, OR gates, NAND gates, NOR gates, XOR gates), microcontrollers, memory, digital potentiometers, signal conversion circuits (A/D converters, D/A converters, voltage/frequency converters), communication circuits (various interface circuits), monitoring and reset circuits (power supply monitoring, program monitoring)..., too numerous to mention.

panasonic electrical component characteristics

The static characteristics of a sensor refer to the relationship between the output and input quantities for a static input signal. Since the input and output quantities are independent of time in this case, their relationship, i.e., the static characteristics of the sensor, can be described by an algebraic equation without time variables, or by a characteristic curve plotted with the input quantity as the abscissa and the corresponding output quantity as the ordinate. The main parameters characterizing the static characteristics of a sensor include: linearity, sensitivity, hysteresis, repeatability, drift, etc. (1) Linearity: refers to the degree to which the actual relationship curve between the sensor output and input deviates from the fitted straight line. It is defined as the ratio of the maximum deviation between the actual characteristic curve and the fitted straight line over the full scale range to the full-scale output value. (2) Sensitivity: Sensitivity is an important indicator of the static characteristics of a sensor. It is defined as the ratio of the increment in the output quantity to the corresponding increment in the input quantity that causes this increment. S is used to denote sensitivity. (3) Hysteresis: Hysteresis is the phenomenon where the input-output characteristic curves do not coincide when the input quantity changes from small to large (forward stroke) and from large to small (reverse stroke). For the same magnitude of input signal, the output signals for the forward and reverse strokes of the sensor are not equal; this difference is called the hysteresis error. (4) Repeatability: Repeatability refers to the degree of inconsistency in the characteristic curves obtained when the sensor input quantity undergoes multiple consecutive full-scale changes in the same direction. (5) Drift: Sensor drift refers to the phenomenon where the sensor output changes over time while the input remains constant. There are two causes of drift: one is the sensor's own structural parameters; the other is the surrounding environment (such as temperature, humidity, etc.). (6) Resolution: When the sensor input increases slowly from a non-zero value, an observable change in the output occurs after exceeding a certain increment; this input increment is called the sensor's resolution, i.e., the minimum input increment. (7) Threshold: When the sensor input increases slowly from zero, an observable change in the output occurs after reaching a certain value; this input value is called the sensor's threshold voltage.

panasonic electrical component parameters

1. Stable voltage refers to the stable voltage value generated across the terminals of a Zener diode when it passes the rated current. This value varies slightly with operating current and temperature. Due to differences in manufacturing processes, the stabilization voltage of Zener diodes of the same model is not completely identical. 2. Reverse leakage current refers to the current passing through the Zener diode when it generates a stable voltage. Below this value, although the Zener diode can still regulate voltage, the regulation effect will deteriorate; above this value, as long as the rated power dissipation is not exceeded, it is permissible, and the voltage regulation performance will be better, but it will consume more electrical energy. 3. Dynamic resistance refers to the ratio of the change in voltage across the Zener diode to the change in current. This ratio varies with the operating current; generally, the larger the operating current, the smaller the dynamic resistance. 4. Rated power dissipation is determined by the allowable temperature rise of the chip, and its value is the product of the stable voltage and the maximum allowable current. 5. Temperature coefficient: If the temperature of the Zener diode changes, its stable voltage will also undergo slight changes. The relative change in voltage across the tube caused by a temperature change of 1℃ is the temperature coefficient (unit: %/℃). Generally speaking, stabilization voltages below 6V belong to Zener breakdown, and the temperature coefficient is negative; the temperature coefficient is positive. When the temperature rises, the depletion layer decreases. In the depletion layer, the valence electrons of atoms rise to higher energy levels, and a smaller electric field strength can excite valence electrons from the atoms to produce Zener breakdown, so its temperature coefficient is negative. Avalanche breakdown occurs when the depletion layer is wider and the electric field strength is lower. An increase in temperature increases the vibration amplitude of lattice atoms, hindering the movement of carriers. In this case, only by increasing the reverse voltage can avalanche breakdown occur, so the voltage temperature coefficient of avalanche breakdown is positive. For applications with high requirements for the power supply, two Zener diodes with opposite temperature coefficients can be connected in series for compensation. Due to mutual compensation, the temperature coefficient is greatly reduced. 7. Reverse leakage current refers to the leakage current generated by the Zener diode under the specified reverse voltage.

panasonic electrical component principles

The Hall voltage changes with the magnetic field strength; the stronger the magnetic field, the higher the voltage, and the weaker the magnetic field, the lower the voltage. The Hall voltage value is very small, typically only a few millivolts, but after amplification by an amplifier in an integrated circuit, the voltage can be amplified enough to output a stronger signal. To make the Hall integrated circuit function as a sensor, mechanical methods are needed to change the magnetic field strength. A rotating impeller is used as a switch to control magnetic flux. When the impeller blades are in the air gap between the magnet and the Hall integrated circuit, the magnetic field deviates from the integrated chip, and the Hall voltage disappears. In this way, the change in the output voltage of the Hall integrated circuit can indicate a certain position of the impeller drive shaft. Using this working principle, the Hall integrated circuit chip can be used as an ignition timing sensor. Hall effect sensors belong to passive sensors; they require an external power supply to work. This characteristic enables them to detect low-speed operation conditions.

Weidou Intelligent Technology specializes in selling German panasonic connectors, panasonic switches, panasonic relays, panasonic controllers, panasonic plugs, panasonic sensors, panasonic resistors, panasonic capacitors, panasonic buses, panasonic modules, panasonic cables, panasonic power supplies, panasonic interfaces, panasonic gateways, panasonic circuit breakers, panasonic original imports from Germany. Welcome customers to inquire and order.