TPGC040378 gripper, Germany goudsmit, model TPGC040378, in stock

The TPGC040378 gripper is one of the actuators for vacuum equipment. Generally, using vacuum suction cups to grasp products is the most economical method. Vacuum suction cups come in various types; rubber suction cups can operate at high temperatures, silicone rubber suction cups are very suitable for grasping products with rough surfaces, and polyurethane suction cups are highly durable. In addition, in actual production, if oil resistance is required for the suction cup, materials such as polyurethane, nitrile rubber, or vinyl-containing polymers can be considered for manufacturing the suction cup. Usually, to avoid scratching the surface of the product, it is best to choose a suction cup with bellows made of nitrile rubber or silicone rubber. The suction cup material is made of nitrile rubber, which has high tensile strength, and is therefore widely used in various vacuum holding devices.

TPGC040378 Gripper Introduction

Vacuum suction cups are one of the actuators for vacuum equipment. The suction cup material is made of nitrile rubber, which has high tensile strength, and is therefore widely used in various vacuum holding devices, such as in construction, paper industry, printing, glass, and other industries, to perform tasks of holding and transporting thin and light items like glass and paper. Vacuum suction cups are also known as vacuum lifters and vacuum nozzles. Generally, using vacuum suction cups to grasp products is the most economical method. Vacuum suction cups come in various types; rubber suction cups can operate at high temperatures, silicone rubber suction cups are very suitable for grasping products with rough surfaces, and polyurethane suction cups are highly durable. In addition, in actual production, if oil resistance is required for the suction cup, materials such as polyurethane, nitrile rubber, or vinyl-containing polymers can be considered for manufacturing the suction cup. Usually, to avoid scratching the surface of the product, it is best to choose a suction cup with bellows made of nitrile rubber or silicone rubber.

TPGC040378 Gripper Principle and Features

The structure of a flat vacuum suction cup consists of the suction cup and the suction cup clamp. A flat vacuum suction cup is first connected to vacuum equipment, such as a vacuum generator, via a pipe fitting, and then brought into contact with the object to be lifted, such as glass or paper. The vacuum equipment is started to create negative pressure inside the suction cup, securely holding the object so that transport can begin. When the object reaches its destination, air is gently introduced into the vacuum suction cup, changing the internal pressure from negative to zero or slightly positive, allowing the suction cup to release the object, thus completing the lifting and transporting task. 1) High wear. Since it is generally made of rubber and directly contacts objects, it experiences severe wear and rapid degradation. It is a pneumatic wearable part. This is why it stands out significantly among many pneumatic components. 2) Easy to use. Regardless of the material of the object being sucked, as long as it can be sealed without leaking, it can be used. Electromagnetic chucks cannot do this; they can only be used on steel materials and cannot lift plates or objects made of other materials. 3) No pollution. Vacuum suction cups are particularly environmentally friendly, causing no environmental pollution, and producing no light, heat, or electromagnetic effects. 4) Does not damage workpieces. Since vacuum suction cups are made of rubber, picking up or placing down workpieces will not cause any damage. Hook-type and cable-type lifting devices cannot achieve this. In some industries, where surface requirements for workpieces are particularly strict, only vacuum suction cups can be used.

TPGC040378 Gripper Maintenance

When using vacuum suction cups (without clamps), note that the manipulator's movement speed should not be too high; otherwise, shear forces will be generated on the suction cup, causing the product to easily fall off during rapid twisting. In some cases, a clamp can be used to ensure safe transport of the product. Considering the possibility of the product sticking to the mold, an air clamp can usually be installed to solve this problem. When the product's surface area is too small or the product is too heavy to use a vacuum suction cup, this problem can also be solved by using a clamp. If the product has strict appearance requirements, the clamped area must not be the outer surface. To solve this problem, a sensor circuit can be installed. After confirming that the clamp or suction cup has securely grasped the product, the sensor sends a signal to the manipulator to proceed with the next operation. In cases where the manipulator's motion capability is limited and manual twisting or prying is required to demold the product or move it out of the forming area, a special cylinder capable of independent movement, not relying on manipulator operation, can be added to improve this situation.

Weidou Intelligent Technology specializes in selling German TPGC040378 tooling fixtures, TPGC040378 machine tool fixtures, TPGC040378 magnetic fixtures, TPGC040378 pneumatic fixtures, TPGC040378 end effectors, TPGC040378 grippers, TPGC040378 grippers, TPGC040378 holders, TPGC040378 electromagnetic fixtures, TPGC040378 vacuum suction cups, TPGC040378 vacuum fixtures, TPGC040378 electric fixtures, TPGC040378 hydraulic fixtures, TPGC040378 electromagnetic chucks, TPGC040378 magnetic chucks, TPGC040378 original German imports. Welcome customers to inquire and order.