German THOR tools THOR models THOR prices

THOR tools refer to electrical safety tools, which are various specialized tools and devices designed to prevent accidents such as electric shock, burns, falls, and stumbling, thereby ensuring the personal safety of workers. In power systems, to successfully complete tasks without causing personal injury, operators must carry and use various safety tools. For example, electrical safety tools are required when inspecting operating electrical equipment, changing operating modes, or performing maintenance and tests; climbing safety tools are needed during line construction; when working on live electrical equipment or in areas near live equipment, insulated safety tools must be used to prevent electric shock or arc burns. Electrical safety tools can be categorized into four types: personal protective equipment, insulated safety tools, climbing tools, and warning signs.

THOR tool features

1) Air is easily accessible, and the operating pressure is low; used air can be discharged locally without the need for recovery pipelines. 2) Air has low viscosity and minimal flow resistance loss, facilitating centralized air supply and long-distance transmission. 3) Pneumatic actuators have high movement speeds. 4) Pneumatic systems have strong adaptability to the environment, capable of reliable operation in wide temperature ranges, humid and dusty conditions; minor leaks do not pollute the environment, there is no risk of fire or explosion, and they are safe to use. 5) Simple structure, easy maintenance, and low cost. 6) Long service life of pneumatic components. 7) The output force of pneumatic components is smaller than that of hydraulic systems, but they move faster, have strong adaptability, can operate in harsh environments such as flammable, explosive, dusty, humid, and impact-prone areas, do not pollute the environment, have a long service life, simple construction, easy maintenance, and low price.

THOR tool usage

1) Rip cutting method: When sawing, place the wood on a bench, step on the wood with your right foot perpendicular to the cut line, stand straight with your left foot at an angle of 60° to the cut line, keep your right hand perpendicular to your right knee, and position your body at an angle of approximately 45° to the cut line. Lean your upper body forward slightly and move it gently, but do not lean left or lunge right. When sawing, hold the saw with your right hand and place your left thumb against the blade for positioning. Gently pull and push the saw a few times (pull first, then push) to start the kerf, then remove your left hand from the edge. When the teeth have cut into the wood by about 5mm, use your left hand to assist your right hand in lifting and pushing the frame saw. Lift the saw lightly, raising the sawing hand slightly; push the saw with more force, applying simultaneous effort from the wrist, elbow, shoulder, and waist in a rhythmic manner. This ensures the saw blade follows the cut line. Otherwise, the edge of the wood after rip cutting will be curved and uneven, or the cross-section of the kerf will be inconsistent. 2) Cross-cutting method: When sawing, place the wood on a bench, stand behind and to the left of the wood, hold the wood with your left hand, hold the saw with your right hand, and step on the wood with your left foot. The sawing method is the same as for rip cutting. When using a frame saw, the lower end of the blade should tilt forward. For rip sawing, the upper end of the blade tilts backward at an angle of approximately 75° to 90° (relative to the wood surface); for cross-cutting, the blade tilts backward at an angle of approximately 30° to 45°. Always ensure the saw blade follows the line without deviation. The kerf must be straight; avoid swaying the blade left and right, which causes skewing. When the wood is nearly severed, stabilize the piece with your left hand, slow down the sawing speed, and cut completely through the wood. Do not leave any material to snap off or break by hand, as this can damage the saw blade and cause the wood to split along the grain, affecting quality.

THOR tool types and features

Hydraulic tools include: hydraulic wrenches, dedicated electric pumps for hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer the advantages of high efficiency and convenience. 1) Mineral oil is generally used as the working medium; moving surfaces self-lubricate, resulting in a long service life. 2) Lightweight, compact, low motion inertia, and fast response speed. 3) Various hydraulic transmission components can be arranged conveniently and flexibly as needed. 4) Automatic overload protection can be implemented. 5) Operation and control are convenient, allowing for a wide range of stepless speed regulation (speed regulation ratio up to 2000:1). 6) Linear motion is easily achieved. 7) Machine automation is easily realized; when using electro-hydraulic combined control, not only can a higher degree of automatic control be achieved, but remote control is also possible.

Weidou Intelligent Technology specializes in selling German THOR workpiece clamps, THOR hydraulic tools, THOR power tools, THOR pneumatic tools, THOR hand tools, THOR electronic tools, THOR welding tools, THOR pipe tools, THOR explosion-proof tools, THOR electrical tools, THOR automotive maintenance tools, THOR fastening tools, THOR cutting tools, THOR striking tools, THOR grinding tools, all original imports from Germany. We welcome inquiries and orders from customers.