German EXACT tools EXACT models EXACT prices

EXACT tools are any tools connected to the edge (joint) of a robot that have a specific function. This may include robot grippers, robot tool changers, robot collision sensors, robot rotary connectors, robot pressure tools, compliance devices, robot spray guns, robot deburring tools, robot arc welding torches, robot electric welding torches, etc. Robot end effectors are generally considered peripheral equipment of the robot, robot accessories, robot tools, or arm-end tools (EOA). Mechanical gripping end effectors used in industrial robots for loading and unloading are mostly two-finger claw types. Classified by finger motion, they can be divided into translational and rotational types. Classified by mechanical clamping method, they can be divided into external clamping and internal expansion types. Classified by mechanical structural characteristics, they can be divided into electric (electromagnetic), hydraulic, and pneumatic types, as well as combinations thereof.

EXACT tool classification

1) Electric planer: One of the main tools used in woodworking and renovation. It is mainly used for planing flat and straight surfaces of various woods. Products are divided into short planers and rough planers. Rough planers are mainly used for planing flat wood surfaces and can process relatively large board surfaces; short planers, in addition to planing board surfaces, can also be used with various guide plates to plane tongues, borders, and grooves. The main features of using a handheld electric planer are small size, light weight, portability, and ease of use. Compared with manual tools, it can greatly reduce labor intensity and improve processing efficiency and quality. When using a handheld electric planer, hold the handle at the rear of the planer body with your right hand and slightly raise the center of gravity of the rear. After starting the power with your left hand, hold the guide handle at the front of the planer, keeping the front center of gravity lower. Follow the operation sequence where the front of the planer contacts the wood first. When the rear center of gravity gradually and steadily contacts the planing surface of the wood, push the planer body forward smoothly in the direction of planing with both hands. After the planer body completes the planing stroke, lift the front of the planer with your left hand, then pick it up with both hands and return to the starting point for planing. Repeat this until all planing is completed. 2) Jigsaw: Also known as electric coping saws or electric fine saws. It is a multifunctional cutting tool that can cut wooden boards for material sizing, as well as perform straight or curved cuts on plastic and metal boards. It is particularly suitable for cutting complex shapes and geometric figures with small radii of curvature. It is an essential multifunctional sawing tool for home renovation and various public interior decoration projects. It features light weight, small size, portability, simple operation, and wide application range. Its cutting principle involves a narrow saw blade with upward-facing teeth. During operation, the blade moves in a linear reciprocating motion up and down to cut, completing various sawing tasks according to size requirements. If used with a guide plate, it can also perform angled bevel processing. When using an electric jigsaw, for smaller and thinner wooden boards, fix them to the workbench first and support the workpiece with your left hand. Then, hold the saw handle with your right hand and slowly push forward for sawing. Apply steady and uniform force during operation; do not use excessive force to avoid injury or damaging the blade. For larger boards, ensure the board is securely fixed, then hold the saw handle with both hands and push forward for sawing. Operate along the marked line and always keep the blade perpendicular to the board surface to prevent jamming or binding. 3) Circular saw: Also known as a small handheld circular saw. It is a new type of small handheld electric saw equipped with a spring-loaded automatic safety guard and an electronically controlled constant-speed motor. It features simple operation, flexible use, quick adjustment, and high safety and reliability. It is very suitable for home renovation tasks such as cutting various wooden boards and artificial fiberboards. The thickness of wood or boards being cut should generally be 60mm or less. 4) Sanding tools: Also known as small handheld grinders. They are mainly used for sanding bare wood before painting various wood finishes, and can also be used for sanding putty coatings. However, sanding putty generates significant dust, which seriously pollutes the environment, so enhanced labor protection is required during operation. Handheld grinders include belt sanders and orbital sanders. Belt sanders are mainly used for rapid sanding of wooden components and products, while orbital sanders are commonly used for sanding larger areas such as wooden floors in home renovations. 5) Small engraving machine: Also known as a groove planer or trimmer. It can be used to cut grooves, tenons, holes, edges, mill, and trim various wooden products and components. It can also be used for simple edge cutting, milling, grooving, and trimming on light metal materials such as aluminum alloy and plastic steel, such as aluminum alloy (or plastic steel) doors and windows, balcony frames, and furniture frames. Therefore, it is also one of the commonly used power tools in modern home renovation projects.

EXACT tool selection

1) Distinguish between household and professional use based on needs. Most power tools are designed for professionals. When purchasing, distinguish between professional and general household tools. The difference usually lies in power; professional tools have higher power to help professionals reduce workload. General household tools are for smaller projects with relatively less workload, so the input power does not need to be very high. 2) The outer packaging of the tool should have clear patterns, no damage, a sturdy plastic box, and durable latches for opening the plastic box. 3) The appearance of the tool should have uniform color. The surface of plastic parts should have no visible flow marks or indentations, and no scratches or impact marks. The assembly misalignment between housing parts should be ≤ 0.5mm. Aluminum casting coatings should be smooth, aesthetically pleasing, and undamaged. The entire machine surface should be free of oil and stains. When holding by hand, the switch handle should be flat. The length of the cable should generally be no less than 2 meters. 4) The nameplate parameters of the tool should match those on the CCC certificate. The manual should include the detailed address and contact information of the manufacturer and production factory. The nameplate or certificate of conformity should include a traceable batch number for the product. 5) Hold the tool by hand, connect to power, and frequently operate the switch to start the tool repeatedly. Observe whether the on/off function of the tool switch is reliable. Simultaneously observe whether there are any abnormalities in nearby televisions or fluorescent lights. This helps confirm whether the tool is equipped with an effective radio interference suppressor. 6) Run the tool for one minute. While running, hold it by hand; you should not feel any abnormal vibration. Observe the commutation sparks; the commutation spark level should not exceed 3/2. Generally, looking inward from the air inlet of the tool, there should be no obvious arcing on the commutator surface. During operation, there should be no abnormal noise.

EXACT tool maintenance

1) Tooth setting: The set is adjusted using a tooth setter. When setting the teeth, engage the slot of the setter with the saw teeth and apply force to bend them alternately to the left or right. The degree of set must meet the requirements for the kerf width. 2) Filing: When filing the saw teeth, clamp the saw blade in a vise so that the teeth protrude. Depending on the size of the teeth, use a triangular steel file 100 to 200 mm in length. File each tooth sequentially from right to left, applying uniform pressure with both hands. One face of the file should be held vertically and flush against the lower cutting edge of the tooth, while the other face rests against the upper edge of the adjacent tooth. If the tooth set is found to be irregular, place the saw blade flat on a steel plate and use a wooden mallet to flatten all the teeth. Then, perform resetting and refiling. In addition, maintain the saw frame; if damage is found in the ropes, nuts, knobs, or wooden mortise-and-tenon joints, adjust or repair them promptly.

Weidou Intelligent Technology specializes in selling German EXACT workholding fixtures, EXACT hydraulic tools, EXACT power tools, EXACT pneumatic tools, EXACT hand tools, EXACT electronic tools, EXACT welding tools, EXACT pipe tools, EXACT explosion-proof tools, EXACT electrical tools, EXACT automotive maintenance tools, EXACT fastening tools, EXACT cutting tools, EXACT striking tools, EXACT grinding tools. EXACT original imports from Germany. Welcome customers to inquire and order.