German ewo armaturen tools ewo armaturen models ewo armaturen prices

ewo armaturen tools are material handling equipment for lifting or jacking heavy loads, operating intermittently to raise weights. Most lifting tools begin a vertical or combined vertical and horizontal work stroke after the rigging picks up the load, unload at the destination, then return empty to the pickup point to complete one work cycle before performing the second lift. Generally, during operation, lifting tools perform picking, moving, and unloading sequentially, with the corresponding mechanisms working intermittently. Lifting tools are mainly used to handle piece goods; when equipped with a grab bucket, they can handle bulk materials such as coal, ore, and grain; when equipped with a ladle, they can lift liquid materials such as molten steel. Some lifting tools, such as elevators, can also be used to carry people. In certain application scenarios, lifting equipment is the primary working tool; for example, cranes used for loading and unloading materials at ports and stations are the main working tools.

ewo armaturen tool classification

1) Squeeze-exhaust suction cups expel all air from the cup by downward squeezing force, creating a negative pressure state inside to hold the workpiece. They offer advantages such as simple structure, light weight, and low cost. However, the suction force is not large, so they are mostly used for workpieces that are not too large in size, thin, and light. 2) Airflow negative pressure suction cups use an airflow control valve to inject compressed air from an air pump through a nozzle, forming a high-speed jet that removes air from the suction cup cavity, creating negative pressure to hold the object. If compressed air is available at the worksite, using this type of suction cup is convenient and low-cost. 3) Vacuum pump exhaust suction cups connect a vacuum pump to the suction cup via an electromagnetic control valve. When the control valve evacuates air, the air in the suction cup cavity is removed, forming negative pressure to hold the object. Conversely, when the control valve connects the suction cup to the atmosphere, the suction cup loses suction and releases the workpiece. The suction force of vacuum pump suction cups mainly depends on the suction area and the degree of vacuum in the inner q cavity (referring to the thinness of the air). This type of suction cup is reliable and provides strong suction, but requires a vacuum pump and airflow control system, resulting in higher costs. 4) Mechanical clamping: Structure of a straight-bar dual-cylinder translational gripper. The gripper fingers are mounted on a straight bar with finger mounting seats. When pressurized gas enters the rod-side chambers of the single-acting dual cylinders, the two pistons move toward the center, clamping the workpiece; when no pressurized gas enters, springs push the two pistons outward, releasing the workpiece. A flow divider valve is installed in the cylinder intake line to ensure synchronized piston movement. This type of end effector is used in loading and unloading assembly workstations.

ewo armaturen tool maintenance

1) Correct air supply system: The intake pressure at the tool inlet (not the compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2). Pressure that is too high or too low will impair tool performance and service life. The intake air must contain sufficient lubricating oil to ensure adequate lubrication of the pneumatic motor inside the tool (place a white paper at the tool exhaust to check for oil stains; the presence of oil stains is normal). The intake air must be free of moisture; it is inappropriate if the compressed air has not passed through an air dryer. 2) Do not arbitrarily disassemble tool parts before operation, as this affects operator safety and may cause tool damage. 3) If the tool has a slight fault or fails to achieve its original function after use, do not continue using it; inspect it immediately. 4) Regularly (approximately once a week) inspect and maintain the tool, adding Grease to rotating parts such as bearings, and adding Oil to the pneumatic motor. 5) When using various tools, strictly follow all safety regulations and operating instructions. 6) Select appropriate tools for the job; tools that are too large can easily cause work injuries, while tools that are too small can easily lead to tool damage.

ewo armaturen tool usage

1) Plane blade adjustment: When installing the plane blade, first fit the blade with the cap iron, control the distance between their cutting edges, and then insert it into the plane body. Bring the cutting edge close to the sole, add the wedge, and press down slightly. Hold the left corner of the sole with your left hand, and use your thumb to firmly hold the wedge, cap iron, and plane blade. Use a hammer to correct the cutting edge so that it protrudes from the mouth. The amount of protrusion is proportional to the cutting depth: more for rough planing, less for fine planing. To check the blade protrusion, lift the plane with your left hand, sole facing up, and look backward with one eye to detect it. If the protrusion is inappropriate, lightly tap the upper end of the blade. If it protrudes too much and needs to be retracted, lightly tap the rear end of the plane body. If one corner of the cutting edge protrudes, only lightly tap the upper side of the same corner of the blade. 2) Key points for pushing the plane: When planing, extend the index fingers of both hands forward to press on the plane body, press the thumbs on the rear part of the blade, and grip the handles tightly with the remaining fingers and palms. Keep the plane body level and apply uniform force with both hands. When pushing forward, increase the force with both thumbs and apply slight pressure with the index fingers; gradually reduce the pressure as you reach the front end until no pressure is applied. When retracting, slightly lift the rear of the plane body with your hand to prevent the cutting edge from dragging on the wood surface, which causes dulling. When planing long stock, place the left foot forward, followed by the right foot. Before planing long stock, check whether the surface to be planed is heartwood or sapwood; generally, heartwood is cleaner and has clearer grain than sapwood. If it is heartwood, plane in the direction from root to tip; if it is sapwood, plane in the direction from tip to root. Planing along the wood grain saves effort; otherwise, it is easy to cause 'tear-out,' resulting in a rough, uneven surface and requiring significant effort. When starting to plane, the sole should fit tightly against the wood surface; do not lift the front of the plane initially. When reaching the end, do not let the front of the plane dip (commonly known as 'nodding'). Otherwise, the middle part of the planed wood surface will bulge unevenly, a common mistake among beginners that must be corrected.

Weidou Intelligent Technology specializes in selling German ewo armaturen workholding fixtures, ewo armaturen hydraulic tools, ewo armaturen power tools, ewo armaturen pneumatic tools, ewo armaturen hand tools, ewo armaturen electronic tools, ewo armaturen welding tools, ewo armaturen piping tools, ewo armaturen explosion-proof tools, ewo armaturen electrical tools, ewo armaturen automotive maintenance tools, ewo armaturen fastening tools, ewo armaturen cutting tools, ewo armaturen striking tools, ewo armaturen grinding tools, ewo armaturen original imports from Germany. Welcome inquiries and orders from customers.