German ebac tools ebac models ebac prices

ebac tools are any tools connected to the edge (joint) of a robot with specific functions. This may include robot grippers, robot tool changers, robot collision sensors, robot rotary connectors, robot pressure tools, compliance devices, robot spray guns, robot deburring tools, robot arc welding torches, robot electric welding torches, etc. Robot end-effectors are generally considered peripheral equipment of the robot, robot accessories, robot tools, or arm-end tools (EOA). Mechanical clamping end-effectors used in industrial robots for loading and unloading are mostly two-finger claw types. Classified by finger motion, they can be divided into translational and rotational types. Classified by mechanical clamping method, they can be divided into external clamping and internal expansion types. Classified by mechanical structural characteristics, they can be divided into electric (electromagnetic), hydraulic, and pneumatic types, as well as their combinations.

ebac tool classification

1) Screwdriver: A tool used to turn screws to force them into position, usually with a thin wedge-shaped head that can be inserted into the slot or recess of the screw head—also known as a "screwdriver". 2) Wrench: A hand tool that uses the lever principle to turn bolts, screws, nuts, and other threaded fasteners, featuring an open jaw or box end to grip the bolt or nut. Wrenches typically have jaws at one or both ends of the handle; applying force to the handle allows turning the bolt or nut. Apply force along the direction of thread rotation to turn the bolt or nut. 3) Hammer: A tool used to strike objects to move or deform them. Most commonly used to drive nails, correct shapes, or break objects apart. Hammers come in various forms; a common form consists of a handle and a head. One side of the head is flat for striking, while the other is the hammer head. The hammer head can be shaped like a claw for pulling nails, or wedge-shaped. There are also round-headed hammer heads. 4) Test pen: Also called a voltage tester, abbreviated as "electric pen". It is an electrical tool used to test whether wires are live. The pen body contains a neon bulb; if the neon bulb lights up during testing, it indicates that the wire is live or is the live wire of a circuit. The tip and tail of the test pen are made of metal, while the pen shaft is made of insulating material. When using a test pen, you must touch the metal part at the tail end with your hand; otherwise, because the charged object, test pen, human body, and earth do not form a circuit, the neon bulb in the test pen will not light up, leading to a misjudgment that the charged object is not live. 5) Tape measure: A tape measure is a commonly used measuring tool in daily life. Steel tape measures are frequently seen, commonly used in construction and decoration, and are essential household tools. Types include fiber tape measures, leather tape measures, waist tapes, etc. Lu Ban rulers, Feng Shui rulers, and Wen Gong rulers also belong to the category of steel tape measures. 6) Utility knife: A type of knife with a sharp blade, used to cut wallpaper and similar materials, hence the name "wallpaper knife," also known as a "craft knife". Frequently used in renovation, decoration, and signboard industries. 7) Electrician's knife: An electrician's knife is a cutting tool commonly used by electricians. Ordinary electrician's knives consist of a blade, cutting edge, handle, and sheath. When not in use, retract the blade into the handle. The root of the blade is hinged to the handle, featuring scale lines and markings; the front end forms a screwdriver tip, both sides have file surfaces, the cutting edge has an inwardly curved section ending in a point, and the handle has a protection button to prevent the blade from snapping back. The blade of an electrician's knife integrates multiple functions; using just one electrician's knife allows completion of various wire connection operations without carrying other tools, offering benefits such as simple structure, ease of use, and versatility. 8) Hacksaw: Includes hand saws (for household use, woodworking), pruning saws (for branch trimming), folding saws (for branch trimming), bow saws, veneer saws (woodworking), rip saws (woodworking), and crosscut saws (woodworking). 9) Spirit level: A spirit level contains a bubble vial and can be used to inspect, measure, and debug whether equipment is installed horizontally. 10) Combination pliers: Combination pliers are clamping and cutting tools composed of a head and handles. The head includes jaws, serrated grips, cutting edges, and wire cutters. The functions of the various parts of the pliers are: (1) The serrated grips can be used to tighten or loosen nuts; (2) The cutting edges can be used to strip the rubber or plastic insulation from soft wires, and also to cut wires and iron wires; (3) The wire cutters can be used to cut harder metal wires such as electrical wires and steel wires; (4) The insulating plastic sleeves on the pliers have a voltage resistance of 500V or higher, allowing live wire cutting. 11) Needle-nose pliers: Also called long-nose pliers, mainly used to cut thin single-strand and multi-strand wires, bend loops on single-strand wire terminals, and strip plastic insulation. They are also one of the commonly used tools for electricians (especially indoor electricians). They consist of pointed tips, cutting edges, and handles. The handles of electrician's needle-nose pliers are covered with insulating sleeves rated for 500V. Due to their pointed tips, needle-nose pliers are suitable for operations in narrow spaces. The method for bending wire terminals with needle-nose pliers is: first fold the wire end to the left, then bend it clockwise to the right against the screw. 12) Wire strippers: Wire strippers are one of the commonly used tools for indoor electricians, motor repair technicians, and instrument electricians; their appearance is shown in the figure below. They consist of cutting edges, crimping jaws, and handles. The handles of wire strippers are covered with insulating sleeves rated for a working voltage of 500V. Wire strippers are suitable for stripping the insulation from plastic and rubber insulated wires and cable cores. The method of use is: place the wire end to be stripped into the cutting jaws of the plier head, squeeze the two handles together with your hand, then release, and the insulation will separate from the core wire.

ebac tool usage

1) Select the appropriate saw blade according to the workpiece. For example, use 14 teeth per inch for cutting solid or thick soft metals; 18 teeth per inch for tool steel, iron pipes, hard metals, etc.; and 24 teeth per inch for cutting metal sheets, metal pipes, and thin iron bars. 2) Push forward to saw, and lift gently when pulling back. 3) Select a wrench of appropriate size according to the nature of the work. 4) When using an adjustable wrench, apply force towards the fixed jaw, never towards the movable jaw. 5) If the wrench opening is worn or slips during use, do not continue to use it to avoid slipping. 6) Do not use a wrench as a hammer for striking. 5) Do not slip a pipe over the handle end of a wrench to increase torque. 7) Press the inner side of the first leg of the square against the edge of the wooden board, and draw a vertical line with a pencil along the inner side of the second leg of the square. 8) Select an appropriate screwdriver according to the size and shape of the screw head slot. 9) Do not strike the screwdriver handle with a hammer; replace damaged handles immediately. 10) Do not use a screwdriver as a chisel or lever. 11) Use an electrician's screwdriver to test current; do not use ordinary screwdrivers to test high voltage. 12) Do not grind the screwdriver tip to avoid damaging the hardened surface. 13) Do not put screwdrivers in shirt or trouser pockets to avoid injury from collisions or falls.

ebac tool usage

1) Carefully inspect before use. Ensure there is no external damage, the switch operates flexibly without sticking, and the power cord and housing of the power tool are intact. Use a 500V megohmmeter to measure the insulation resistance between the winding and the housing; it must not be less than O.5 megohms. See the attached table for insulation resistance values. 2) Handheld power tools with metal housings must have a reliable protective grounding wire. The power cord should be a multi-core soft rubber sheathed cable, and the grounding protection wire at both ends must be securely connected. 3) Handheld power tools should be used by dedicated personnel with certain professional knowledge. Strictly adhere to relevant safety operating procedures during use. 4) Before use, check whether the relevant electrical and mechanical protection devices are intact and functioning normally. Also ensure that the rotating parts rotate flexibly without sticking. 5) When using Class I handheld power tools, users must wear prescribed protective equipment and set up qualified protective gear. Take corresponding anti-electric shock safety measures as required, such as installing residual current devices (RCDs) in the power circuit, or having the user wear insulating gloves, insulating shoes, or stand on an insulating mat. When using Class II handheld power tools in damp and narrow places, install a leakage switch with a working current of less than 1.5mA and an action time of less than or equal to 0.1 seconds. The leakage switch should be placed inside the container and supervised by dedicated personnel. 6) Occupational hazards of using handheld power tools. Arm vibration disease caused by long-term hand-transmitted vibration work was listed as one of China's statutory occupational diseases as early as 1957, also known as local vibration disease, typically manifested as episodic white finger.

Weidou Intelligent Technology professionally sells German ebac workholding fixtures, ebac hydraulic tools, ebac power tools, ebac pneumatic tools, ebac hand tools, ebac electronic tools, ebac welding tools, ebac piping tools, ebac explosion-proof tools, ebac electrical power tools, ebac automotive maintenance tools, ebac fastening tools, ebac cutting tools, ebac striking tools, ebac grinding tools. All ebac products are original imports from Germany. Welcome customers to inquire and order.