German Berg tools Berg models Berg prices

Berg tools refer to the general term for various metal devices manufactured through physical processing such as forging, rolling, and cutting of metals like iron, steel, and aluminum. Hardware tools, classified by product application, include: tool hardware, construction hardware, daily-use hardware, locks and abrasives, kitchen and bathroom hardware, home hardware, and hardware components. They include various manual, electric, pneumatic, and cutting tools; automotive maintenance tools; agricultural tools; lifting tools; measuring tools; tool machinery; cutting tools; jigs and fixtures; cutters; molds; cutting edges; grinding wheels; drill bits; polishers; tool accessories; measuring and cutting tools; painting tools; abrasives and grinding materials; manual socket wrench sockets; striking open-end wrenches and striking box-end wrenches.

Berg tool types

1) Frame saw. Also known as a buck saw, it consists of an H-shaped wooden frame, twisted rope and toggle, and saw blade. The ends of the saw blade are fixed to the frame with knobs, which can also be used to adjust the angle of the blade. After the twisted rope is tightened, the saw blade is taut and ready for use. Frame saws are classified into coarse, medium, and fine types based on blade length and tooth pitch. Coarse saw blades are 650—750mm long, with a tooth pitch of 4—5mm; coarse saws are mainly used for sawing thicker lumber. Medium saw blades are 550—650mm long, with a tooth pitch of 3—4mm; medium saws are mainly used for sawing thin lumber or cutting tenons. Fine saw blades are 450—500mm long, with a tooth pitch of 2—3mm; fine saws are mainly used for sawing finer wood and cutting tenon shoulders. 2) Hand saw. A hand saw mainly consists of a saw edge and a handle, and can be classified into single-sided, double-sided, and back saws. Single-sided hand saws are 350mm long, with teeth on one side; depending on the function of the teeth, they can be divided into rip saws and crosscut saws. Double-sided hand saws are 300mm long, with teeth on both sides; typically, one side is a rip saw and the other is a crosscut saw. Back saw blades are 250—300mm long; the back of the back saw is reinforced with a steel strip, the teeth are finer, and they are available as rip saws and crosscut saws. 3) Groove saw. A groove saw consists of a handle and a saw blade, with the blade being approximately 200mm long. Groove saws are mainly used for cutting grooves in wood. 4) Panel saw. Also known as a hand saw, it consists of a handle and a saw blade, with the blade being approximately 250—750mm long and a tooth pitch of 3—4mm; panel saws are mainly used for sawing wider boards. 5) Keyhole saw. The blade is narrow and long, with a pointed tip, and a length of approximately 300—400mm. Keyhole saws are mainly used for sawing narrow holes and slots. 6) Coping saw. Also known as a fret saw, its structure is similar to that of a frame saw, but the blade is narrower (approximately 10mm), mainly used for sawing arcs and curves. 7) Wire saw. Also known as a bow saw, it is made by bending a bamboo strip into a bow shape and stretching a wire between the ends; serrated edges are cut into the wire, using the sharp edges for sawing. The wire is approximately 200—600mm long, and the saw bow is 800—900mm long. Wire saws are mainly used for sawing complex curves and cutting holes.

Berg tool structure and composition

The function of power components is to convert the mechanical energy of the prime mover into hydraulic pressure energy. This refers to the oil pump in a hydraulic system, which provides power to the entire hydraulic system. Common structural forms of hydraulic pumps include gear pumps, vane pumps, and piston pumps. Actuators (such as hydraulic cylinders and hydraulic motors) convert hydraulic pressure energy into mechanical energy, driving loads in linear reciprocating or rotary motion. Control components (i.e., various hydraulic valves) control and regulate the pressure, flow, and direction of the fluid in the hydraulic system. Depending on the control function, hydraulic valves are classified into pressure control valves, flow control valves, and directional control valves. Pressure control valves include relief valves (safety valves), reducing valves, sequence valves, and pressure relays; flow control valves include throttle valves, adjustment valves, and flow divider/combiner valves; directional control valves include check valves, pilot-operated check valves, shuttle valves, and directional control valves. Depending on the control method, hydraulic valves are classified into on/off control valves, fixed-value control valves, and proportional control valves. Auxiliary components include oil tanks, oil filters, oil pipes and pipe fittings, sealing rings, pressure gauges, and oil level/temperature gauges. Hydraulic oil is the working medium for energy transmission in hydraulic systems, including mineral oils, emulsions, and synthetic hydraulic oils.

Berg tool features

1) Lifting tools are typically compact in size and simple in mechanism, capable of performing lifting and horizontal movements. 2) The loads lifted by lifting tools vary widely. Some heavy loads weigh hundreds or even thousands of tons, some objects are tens of meters long, and shapes are often irregular, including bulk materials, molten states, and flammable, explosive, or hazardous items, making the lifting process complex and dangerous. 3) Some lifting tools need to operate over a large spatial range; some require tracks and wheels (such as tower cranes and bridge cranes); others require tires or crawler tracks for ground movement (such as truck cranes and crawler cranes); some need to move along steel cables (such as passenger and freight aerial ropeways). The large operating space means that any accident can have a wide impact. 4) Some lifting tools need to directly transport personnel for vertical movement on guide rails, platforms, or steel cables (such as elevators and lifting platforms), so their reliability directly affects personal safety. 5) Lifting tools have many exposed and moving parts that often come into direct contact with lifting personnel (such as hooks and steel cables), posing many potential accidental hazards. 6) Complex operating environments. From large integrated steel enterprises to modern ports, construction sites, railway hubs, and tourist attractions, lifting tools are in operation; work sites often encounter high temperatures, high pressure, flammable and explosive materials, power lines, strong magnetic fields, and other hazards, posing threats to equipment and personnel. 7) Lifting operations often require coordination among multiple people. A single operation requires skilled coordination among command, rigging, and operating personnel, with coordinated actions and mutual awareness. Personnel must have the ability to handle on-site emergencies. Close cooperation among multiple workers is often difficult. These characteristics of lifting tools determine their significant relationship with safe production. Any negligence in the design, manufacturing, installation, use, and maintenance of lifting tools may cause casualties or equipment accidents, resulting in both personal injury and significant economic losses.

Weidou Intelligent Technology specializes in selling German Berg workholding fixtures, Berg hydraulic tools, Berg power tools, Berg pneumatic tools, Berg manual tools, Berg electronic tools, Berg welding tools, Berg piping tools, Berg explosion-proof tools, Berg electrical tools, Berg automotive maintenance tools, Berg fastening tools, Berg cutting tools, Berg striking tools, Berg grinding tools, Berg original German imports. Welcome inquiries and orders from customers.