German BENNING tools BENNING models BENNING prices

BENNING tools refer to electrical safety tools, which are various specialized tools and devices designed to prevent accidents such as electric shock, burns, falls, and stumbling, thereby ensuring the personal safety of workers. In power systems, to complete tasks smoothly without personal injury, operators must carry and use various safety tools. For example, electrical safety equipment is required when inspecting operating electrical equipment, changing operating modes, or performing maintenance and tests; climbing safety equipment is needed during line construction; when working on live electrical equipment or in areas near live equipment, insulated safety tools must be used to prevent electric shock or arc burns. Electrical safety tools can be divided into four categories: personal protective equipment, insulated safety tools, climbing tools, and warning signs.

BENNING tool classification

1) Electric planer: It is one of the main tools used in woodworking and decoration. It is mainly used for planing flat and straight surfaces of various woods. Products are divided into short planers and rough planers. Rough planers are mainly used for planing flat wood surfaces and can process larger board surfaces; short planers, in addition to planing board surfaces, can also be used with various guide fences to plane tongues and grooves, edges, and slots. The main features of using a handheld electric planer are small size, light weight, portability, and ease of use. Compared with manual tools, it can greatly reduce labor intensity and improve processing efficiency and quality. When using a handheld electric planer, hold the handle at the rear of the planer body with your right hand and slightly raise the center of gravity of the rear. After starting the power with your left hand, hold the guide handle at the front of the planer, keeping the front center of gravity lower. Follow the operation sequence where the front of the planer contacts the wood first. When the rear center of gravity gradually and steadily contacts the planing surface, push the planer body forward smoothly in the direction of planing with both hands. After the planing stroke is completed, lift the front of the planer with your left hand, then pick it up with both hands and return to the starting point for the next pass. Repeat this until all planing is completed. 2) Jigsaw: Also known as electric coping saws or electric fine saws. It is a multifunctional cutting tool that can cut materials from wooden boards, as well as perform straight or curved cuts on plastic and metal sheets. It is particularly suitable for cutting complex shapes and geometric figures with small radii of curvature. It is an essential multifunctional sawing tool for home renovation and various public interior decoration projects. It features light weight, small size, portability, simple operation, and wide application range. Its cutting principle involves a narrow saw blade with teeth facing upward. During operation, the blade moves in a linear reciprocating motion up and down to cut, completing various sawing tasks according to size requirements. If used with a guide fence, it can also perform angled bevel processing. When using an electric jigsaw, for smaller and thinner wooden boards, fix them to the workbench first and support the workpiece with your left hand. Then, hold the saw handle with your right hand and push forward slowly for cutting. Apply steady and uniform force; do not use excessive force to avoid injury or damaging the blade. For larger boards, ensure the board is securely fixed, then hold the saw handle with both hands and push forward for sawing. Cut along the marked line and always keep the blade perpendicular to the board surface to prevent jamming or binding. 3) Circular saw: Also known as a small handheld circular saw. It is a new type of small handheld electric saw equipped with a spring-loaded automatic safety guard and an electronically controlled constant-speed motor. It features simple operation, flexible use, quick adjustment, and high safety and reliability. It is very suitable for home renovation tasks such as cutting various wooden boards and fiberboards. The thickness of wood or boards being cut should generally be 60mm or less. 4) Sanding tools: Also known as small handheld grinders. They are mainly used for sanding bare wood before painting various wood finishes, and can also be used for sanding putty surfaces. However, sanding putty generates significant dust, which seriously pollutes the environment, so enhanced labor protection is required during operation. Handheld grinders include belt sanders and orbital sanders. Belt sanders are mainly used for rapid sanding of wooden components and products, while orbital sanders are commonly used for sanding large areas such as wooden floors in home renovations. 5) Small engraving machine: Also known as a slotter or trimmer. It can be used for slotting, tenoning, drilling, edging, milling, and trimming on various wooden products and components. It can also be used for simple edging, milling, grooving, and trimming on light metal materials such as aluminum alloy and plastic steel, such as aluminum alloy (or plastic steel) doors and windows, balcony frames, and furniture frames. Therefore, it is also one of the commonly used power tools in modern home renovation projects.

BENNING tool precautions

Large saws are commonly used for thick and wide boards; small saws are used for narrow and thin wood; coarse saws are used for cross-cutting; fine saws are used for tenons and shoulders. Saw blades with larger set are used for hardwoods and wet wood, while blades with smaller set are used for softwoods and dry wood. When using saws, attention must be paid to safe operating methods for each type: 1) Before using a frame saw, adjust the blade angle with the knob. Conventionally, it should form an angle of 45° with the plane of the wooden frame. Tighten the tension rope with the toggle to keep the blade taut and straight. When starting the cut, hold the saw handle firmly with your right hand and place your left hand at the starting point. Push and pull gently a few times. Do not use excessive force. Do not twist the saw left or right during cutting. Apply more pressure on the push stroke and less on the pull stroke, maintaining a uniform rhythm. Hold the part being cut off with your hand when nearing the end of the cut. Loosen the blade after use and hang it in a secure location. 2) When using a crosscut saw, apply balanced force with both hands to prevent the saw from drifting toward the side with greater force. Correct any deviation slowly to prevent jamming or breaking the blade. 3) When using a wire saw, do not pull too forcefully or too quickly to avoid breaking the wire. During sawing, the operator's head must not be positioned above the upper end of the bow frame to avoid facial injury if the wire breaks. 4) Regularly check the sharpness of the blade and the stability of the saw frame and handle. Repair blades with dull or uneven teeth promptly. Repair or replace damaged ropes, nuts, knobs, handles, and wooden frames before continuing use.

BENNING tool features

The electro-permanent magnetic chuck has extremely strong holding force, up to 16kg/cm², with uniform and adjustable magnetic distribution. It is suitable for various heavy machining, roughing, and finishing operations. Ordinary permanent magnetic chucks have weaker and uneven holding force, unable to meet the requirements of heavy machining. The holding force of the electro-permanent magnetic chuck does not require continuous power supply, generating no heat during continuous operation, thus avoiding thermal deformation of the workpiece. The strong and uniform surface holding force ensures maximum machining precision even if the workpiece overhangs the table. In contrast, ordinary electromagnetic chucks require a continuous current supply, generating heat after a period of operation. This not only causes thermal deformation of the workpiece but also reduces the magnetic force, compromising machining precision. The electro-permanent magnetic chuck can be used continuously without failure or maintenance, even if operated for more than 20 hours daily. Ordinary permanent magnets show a decline in holding force after about half a year, and electromagnetic chucks can only operate for a few hours a day, prone to failures requiring frequent replacement and repair of internal components. Using ordinary permanent magnetic chucks requires significant workpiece adjustment time, accounting for 40%-50% of the entire machining process, leading to obvious clamping and positioning errors, high scrap rates, and low efficiency. The electro-permanent magnetic chuck features automatic auxiliary positioning. Simply pressing a button completes workpiece clamping or release in 0.3 seconds, significantly improving production efficiency.

Weidou Intelligent Technology specializes in selling German BENNING workholding fixtures, BENNING hydraulic tools, BENNING power tools, BENNING pneumatic tools, BENNING hand tools, BENNING electronic tools, BENNING welding tools, BENNING pipe tools, BENNING explosion-proof tools, BENNING electrical tools, BENNING automotive maintenance tools, BENNING fastening tools, BENNING cutting tools, BENNING striking tools, BENNING grinding tools. All BENNING products are original imports from Germany. Welcome customers to inquire and order.