German mytec workholding fixtures mytec model mytec price

mytec workholding fixtures are devices that grip objects to manipulate them. They can clamp and release objects while performing certain actions. Motion devices often mimic human movements; in the case of grippers, they mimic finger movements. The "fingers" themselves are not part of the gripper; they are specialized custom tools for gripping objects, called "jaws." Two main clamping actions: External clamping: This is the most common method for gripping objects. It is the simplest and requires the shortest stroke length. When the gripper jaws close, the clamping force applied by the gripper will hold the object. Internal clamping: In some applications, due to the geometry of the object or the need to access the exterior of the object, it is necessary to grip the object from the center. In this case, the gripper will hold the object through expansion force.

mytec workholding fixture introduction

Vacuum suction cups are one type of actuator for vacuum equipment. The suction cup material is made of nitrile rubber, which has high tensile strength, making it widely used in various vacuum holding equipment, such as in construction, papermaking, printing, glass, and other industries, to perform tasks of holding and transporting thin and light items like glass and paper. Vacuum suction cups are also known as vacuum lifters and vacuum nozzles. Generally, using vacuum suction cups to grab products is the most economical method. There is a wide variety of vacuum suction cups. Rubber suction cups can operate at high temperatures. Suction cups made of silicone rubber are very suitable for grabbing products with rough surfaces. Suction cups made of polyurethane are highly durable. Additionally, in actual production, if oil resistance is required for the suction cup, materials such as polyurethane, nitrile rubber, or vinyl-containing polymers can be considered for manufacturing the suction cup. Typically, to avoid scratching the surface of the product, it is best to choose suction cups with bellows made of nitrile rubber or silicone rubber.

mytec workholding fixture technology

The electromagnetic chuck consists of a base housing, iron core, coil, faceplate, and junction box. Its manufacturing process is as follows: 1) Select suitable materials for welding or casting the base housing. 2) Install the iron core onto the base housing according to the type of chuck. 3) Wind the coil with the corresponding number of turns and technical parameters, dry it, and fit it onto the iron core. 4) Pour asphalt or other waterproofing materials into the interior of the base housing. 5) Manufacture the faceplate and install it together with the base housing. Electromagnetic chucks use DC power supply and feature stability, strong holding force, and low residual magnetism. Electromagnetic chucks can be classified into standard-holding chucks and heavy-duty chucks. The holding force of standard-holding chucks is 10-12 kg/cm², while heavy-duty electromagnetic chucks are no less than 14 kg/cm². Based on application, they can be categorized into electromagnetic chucks for grinders, electromagnetic chucks for milling and planing machines, electromagnetic chucks for tool sharpening machines, etc.

mytec workholding fixture selection and usage

With the continuous development of China's industry, electromagnetic chucks are increasingly widely used in industrial production. The most important aspect of an electromagnetic chuck is its parameters; among the performance parameters, the lifting capacity and its duty class are the most critical. The so-called lifting capacity of an electromagnetic chuck refers to the maximum weight of the load allowed to be lifted under specified operating conditions, also known as the rated lifting capacity. Generally, for cranes equipped with electromagnetic chucks, the lifting capacity should also include the weight of the electromagnetic chuck itself. Rectangular electromagnetic chucks have lifting screw holes on both sides. During installation, T-shaped screws can be screwed in for lifting. They are fixed to the worktable using T-shaped blocks and screws. Connect the DC power supply and ground wire from the machine tool, then perform a precision grind on the upper surface of the chuck to ensure the parallelism between the upper surface and the bottom surface. When clamping workpieces, sufficient positioning holding force can be obtained by bridging two adjacent magnetic poles, allowing grinding operations to proceed. Magnetization and demagnetization of the workpiece can be controlled via the machine tool buttons.

Weidou Intelligent Technology specializes in selling German mytec tooling fixtures, mytec machine tool fixtures, mytec magnetic fixtures, mytec pneumatic fixtures, mytec end effectors, mytec grippers, mytec grippers, mytec holders, mytec electromagnetic fixtures, mytec vacuum suction cups, mytec vacuum fixtures, mytec electric fixtures, mytec hydraulic fixtures, mytec electromagnetic chucks, mytec magnetic chucks, mytec original imports from Germany. We welcome inquiries and orders from customers.