Germany Boehmer seals Boehmer model Boehmer price

Boehmer seals are materials or components that prevent leakage of fluids or solid particles from adjacent mating surfaces and prevent external contaminants such as dust and moisture from entering machinery. The recommended storage temperature for seals is below 30 °C to avoid high-temperature aging. Seals are classified into static seals and dynamic seals. Their main function is to prevent leakage of fluids or solid particles from adjacent mating surfaces and to prevent external contaminants such as dust and moisture from entering machinery. Static sealing refers to the tight closure of sealed chambers or containers, used for seals on letters and wills.

Boehmer seal introduction

A mechanical seal is a shaft sealing device for rotating machinery, such as centrifugal pumps, centrifuges, reaction vessels, and compressors. Since the drive shaft passes through the inside and outside of the equipment, there is a circumferential gap between the shaft and the equipment. Media inside the equipment leaks outward through this gap; if the internal pressure is lower than atmospheric pressure, air leaks into the equipment. Therefore, a shaft sealing device is required to prevent leakage. There are many types of shaft seals. Due to advantages such as low leakage and long service life, mechanical seals are the primary shaft sealing method for these equipment worldwide. Mechanical seals are also called face seals. National standards define them as: "a device that prevents fluid leakage, formed by at least one pair of faces perpendicular to the rotation axis, which remain in contact and slide relative to each other under the action of fluid pressure and the elastic force (or magnetic force) of a compensation mechanism, with the assistance of auxiliary seals."

Boehmer seal structure composition

1) Main components: rotating ring, stationary ring, cooling device, and compression spring (depending on specific equipment). 2) Auxiliary seals: sealing rings (including O-shape, X-shape, U-type, wedge shape, rectangular flexible graphite, PTFE-covered rubber O rings, etc.). 3) Elastic compensation mechanism: springs, thrust rings, spring seats, keys, or various screws. 4) Classification: single face, double face; balanced, unbalanced; arbitrary rotation direction, fixed rotation direction.

Boehmer seal installation precautions

1) During installation, pay close attention to avoiding installation deviations. Tighten the gland after aligning the coupling. Bolts should be tightened evenly to prevent tilting of the gland face. Check all points with a feeler gauge; the error must not exceed 0.05 mm. Check the fit clearance (i.e., concentricity) between the gland and the outer diameter of the shaft or shaft sleeve. It must be uniform around the circumference. Check all points with a feeler gauge; the permissible error must not exceed 0.01 mm. 2) Compress the spring according to specifications. Excessive or insufficient compression is not allowed. The required error is 2.00 mm. Excessive compression increases face specific pressure, accelerating face wear. Insufficient compression results in inadequate specific pressure, failing to achieve sealing. 3) After installing the rotating ring, it should automatically spring back when pressed against the spring. 4) Installation position requirements: To ensure stable operation, long service life, and low leakage performance of the mechanical seal, correct installation on the machine is crucial. Before installing the mechanical seal on the machine, carefully compare it with the general assembly drawing to confirm that all parts are ready. Pay attention to any abnormalities such as scratches or damage on the sealing friction faces and sealing rings. Also check for scratches on the shaft or shaft sleeve surfaces and flanges that contact packing and sealing rings (O rings). If abnormalities are found, replace or repair before use. During actual installation, do not bring unnecessary parts to the site. If parts remain after installation, it indicates missing installations; if parts are insufficient, it indicates unnecessary assemblies, serving as a self-check during installation.

Weidou Intelligent Technology professionally sells German Boehmer seals, Boehmer sealing rings, Boehmer sealing strips, Boehmer pipe seals, Boehmer cable seals, Boehmer rubber seals, Boehmer mechanical seals, Boehmer gaskets, Boehmer oil seals, Boehmer shaft seals, Boehmer metal seals, Boehmer high-pressure seals, Boehmer spiral seals, Boehmer centrifugal seals, Boehmer sealing rings, Boehmer original German imports. Welcome customers to inquire and order.