German Hirschmann SKS sensors, Hirschmann SKS models, Hirschmann SKS prices

Hirschmann SKS sensor is a sensor that measures the air flow into the engine. For electronic control gasoline injection engines, in order to obtain the optimal mixture concentration under various operating conditions, it is necessary to accurately measure the amount of air drawn into the engine at every instant, using this as the main basis for the ECU to calculate (control) the fuel injection quantity. If the air flow sensor or wiring fails, the ECU will not receive the correct intake air signal, preventing normal control of fuel injection, which will cause the mixture to be too rich or too lean, resulting in abnormal engine operation.

Hirschmann SKS sensor classification

Load cells are classified into 8 types based on conversion methods, including photoelectric, hydraulic, electromagnetic force, capacitive, magnetic pole variation, vibratory, gyroscopic, and resistive strain gauge types, with resistive strain gauge being the most widely used. 1) Photoelectric type: Includes grating and code disk types. Grating sensors use Moiré fringes formed by gratings to convert angular displacement into photoelectric signals. There are two gratings: one fixed grating and one moving grating mounted on the dial shaft. The measured object on the load platform rotates the dial shaft through the force transmission lever system, driving the moving grating to rotate and causing the Moiré fringes to move. Using phototubes, conversion circuits, and display instruments, the number of moved Moiré fringes can be calculated to determine the angle of grating rotation, thereby determining and reading the mass of the measured object. Code disk sensor: The code disk (symbol plate) is a piece of transparent glass mounted on the dial shaft, featuring black and white codes arranged according to a specific encoding method. When the measured object on the load platform causes the dial shaft to rotate via the force transmission lever, the code disk also rotates by a certain angle. Photocells receive light signals through the code disk and convert them into electrical signals, which are then digitally processed by the circuit, finally displaying the digital value representing the measured mass on the display. Photoelectric sensors were mainly used in electromechanical combination scales. 2) Hydraulic type: Under the action of the gravity P of the measured object, the pressure of the hydraulic oil increases, with the degree of increase proportional to P. By measuring the increased pressure value, the mass of the measured object can be determined. Hydraulic sensors have a simple and robust structure and a large measurement range, but accuracy generally does not exceed 1/100. 3) Capacitive type: It operates based on the direct proportional relationship between the oscillation frequency f of the capacitor oscillator circuit and the distance d between the plates. There are two plates, one fixed and the other movable. When the measured object is loaded onto the load platform, the leaf spring deflects, changing the distance between the two plates, which in turn changes the oscillation frequency of the circuit. By measuring the change in frequency, the mass of the measured object on the load platform can be determined. Capacitive sensors consume little power, have low cost, and an accuracy of 1/200 to 1/500.

Hirschmann SKS sensor features

Resistors, inductors, and capacitors are the three major types of passive components in electronics. A capacitive sensor is a sensor that converts changes in the measured quantity into changes in capacitance; it is essentially a capacitor with variable parameters. Capacitive sensors have the following advantages: high impedance, low power, requiring only very low input energy. They can achieve large changes, resulting in high signal-to-noise ratio and system stability. Fast dynamic response, with operating frequencies reaching several megahertz, suitable for non-b contact measurement, where the measured object can be either a conductor or a semiconductor. Simple structure, strong adaptability, capable of working in harsh environments such as high/low temperatures and strong radiation, with wide application. With the development of electronic technology and computer technology, disadvantages of capacitive sensors, such as susceptibility to interference and distributed capacitance, have been continuously overcome. Additionally, capacitive grid displacement sensors and integrated capacitive sensors have been developed. Therefore, they are widely used in non-electrical quantity measurement and automatic detection, capable of measuring parameters such as pressure, displacement, speed, acceleration, A level, thickness, liquid level, humidity, vibration, and component content. Capacitive sensors have good development prospects.

Hirschmann SKS sensor installation precautions

1) Handle load cells with care, especially small capacity sensors with aluminum alloy elastic bodies. Any impact or drop caused by vibration is likely to cause significant output errors. 2) When designing the loading device and during installation, ensure that the axis of the loading force coincides with the force-bearing axis of the load cell to minimize the effects of inclined and eccentric loads. 3) Regarding level adjustment. If using a load cell, the installation plane of its base must be adjusted with a spirit level until horizontal. If multiple sensors are measuring simultaneously, their base installation surfaces should be kept as level as possible. The main purpose of this is to ensure that the force borne by each sensor is basically consistent. 4) Determine the rated load of the sensor used based on the load cell capacity selection specified in its instructions. 5) To prevent chemical corrosion, apply Vaseline to the outer surface of the load cell during installation. Avoid use in locations with direct sunlight exposure and drastic environmental temperature changes. 6) Install bypasses made of copper braided wire at both ends of the load cell loading device. 7) Do not extend the cable yourself. If extension is absolutely necessary, solder the joints and add moisture-proof sealant. 8) It is best to use baffles around the load cell to cover it. This prevents debris from falling into the moving parts of the sensor, affecting its measurement accuracy. 9) Keep the sensor cable away from high-power power lines or places with pulse waves. If avoidance is impossible, run the load cell cable separately through an iron pipe and shorten the connection distance as much as possible. 10) Determine the rated load of the sensor used based on the load cell capacity selection specified in its instructions. Although load cells have a certain overload capacity, avoid such situations during installation and use. Sometimes, even short-term overloading can cause permanent damage to the sensor. 11) For high-precision applications, allow the load cell and instrument to warm up for 30 minutes before use.

Weidou Intelligent Technology specializes in selling German Hirschmann SKS sensors, Hirschmann SKS proximity sensors, Hirschmann SKS distance sensors, Hirschmann SKS vision sensors, Hirschmann SKS displacement sensors, Hirschmann SKS load cells, Hirschmann SKS speed sensors, Hirschmann SKS photoelectric sensors, Hirschmann SKS position sensors, Hirschmann SKS angle sensors, Hirschmann SKS tactile sensors, Hirschmann SKS temperature sensors, Hirschmann SKS pressure sensors, Hirschmann SKS flow sensors, Hirschmann SKS level sensors, Hirschmann SKS motion sensors, Hirschmann SKS process sensors. Original German imports. Welcome inquiries and orders from users.