German scherzinger pump scherzinger model scherzinger price

scherzinger pumps are rotary pumps that transport liquids or increase their pressure by relying on the change and movement of the working volume formed between the pump cylinder and the meshing gears. Two enclosed spaces are formed by two gears, the pump body, and the front and rear covers. When the gears rotate, the volume of the space on the disengaging side increases from small to large, creating a vacuum that draws in the liquid. The volume of the space on the meshing side decreases from large to small, squeezing the liquid into the pipeline. The suction chamber and the discharge chamber are separated by the meshing line of the two gears. The pressure at the discharge port of a gear pump depends entirely on the magnitude of the resistance at the pump outlet.

scherzinger pump motor features

1) Compact structure, small size, and light weight: Composed of an aluminum alloy front cover, intermediate body, and rear cover, alloy steel gears, and aluminum alloy pressure plates. Two DU bearings are press-fitted inside the front and rear covers respectively. DU material is the ideal bearing material for gear pumps, significantly extending the service life of the gear pump. 2) Reliable operation: The pressure plate is the main component for radial and axial pressure compensation. It reduces bearing load and automatically adjusts the axial clearance of the gear pump, thereby effectively improving the performance indicators and operational reliability of the gear pump. GM5 and GPC4 series gear motors offer four structural configurations: single rotation direction without front bearing, double rotation direction without front bearing, single rotation direction with front bearing, and double rotation direction with front bearing. Gear motors with front bearings can withstand both radial and axial forces. 3) High speed and high pressure: Speed ranges from 3000 to 4000 rpm, with theoretical torque from 17N.m (N.m) to 64N.m, reaching up to 20-25MPa. 4) Connection methods suitable for imported machinery and engineering equipment: Complies with SAE and national standard GB for mounting flanges, shaft extensions, oil inlet, and oil outlet connection styles. Widely applicable to hydraulic systems in automobiles, tractors, engineering machinery, agricultural machinery, and other mechanical equipment.

scherzinger pump working principle

The concept of a gear pump is very simple. Its most basic form consists of two gears of identical size meshing and rotating within a closely fitted housing. The interior of this housing resembles a '8' shape, with the two gears installed inside. The outer diameter of the gears and their sides fit closely with the housing. Material from the extruder enters the space between the two gears at the suction inlet, filling this space. As the teeth rotate, the material moves along the housing and is finally discharged when the two teeth mesh. Gear pumps are also known as positive displacement devices. Similar to a piston in a cylinder, when one tooth enters the fluid space of another tooth, the liquid and the tooth cannot occupy the same space simultaneously because the liquid is incompressible. Thus, the liquid is mechanically squeezed out. Due to the continuous meshing of the teeth, this phenomenon occurs continuously, providing a continuous discharge volume at the pump outlet. The discharged volume per revolution is constant. As the drive shaft rotates continuously, the pump discharges fluid without interruption. The pump flow rate is directly related to the pump speed. In practice, there is a small amount of fluid loss within the pump because this fluid is used to lubricate the bearings and the sides of the gears. Furthermore, the pump body cannot have a gap-free fit, so the fluid cannot be discharged 100% from the outlet. Therefore, a small amount of fluid loss is inevitable, preventing the pump's operating efficiency from reaching 100%. However, the pump can still operate well, achieving an efficiency of 93% to 98% for most extruded materials. This pump is not significantly affected by changes in fluid viscosity or density during the process. If a damper, such as a filter screen or restrictor, is placed on the discharge side, the pump will push the fluid through them. If this damper changes during operation—for example, if the filter becomes dirty or clogged, or if the back pressure of the restrictor increases—the pump will maintain a constant flow until the mechanical limit of the weakest component in the device is reached (a torque limiter is usually installed). There is actually a limit to the pump's speed, which mainly depends on the process fluid. If oil is being transported, the pump can rotate at high speeds. However, if the fluid is a high-viscosity polymer melt, this limit increases significantly. It is crucial to fill the space between the two teeth on the suction inlet side with high-viscosity fluid. If this space is not fully filled, the pump cannot discharge an accurate flow rate. Therefore, the PV value (pressure × flow velocity) is another limiting factor and a process variable. Due to these limitations, gear pump manufacturers offer a range of products with different specifications and displacements (volume discharged per revolution). These pumps are matched to specific application processes to optimize system capability and price.

scherzinger pump trapped oil phenomenon

For a gear pump to operate smoothly, the contact ratio of the gear meshing must be greater than 1. Consequently, there are always two pairs of gears meshing simultaneously, trapping a portion of the oil in the enclosed cavity formed by these two pairs of teeth. This enclosed cavity gradually decreases in volume as the gears rotate, and then gradually increases. The reduction in the volume of the enclosed cavity compresses the trapped oil, generating high pressure. The oil is squeezed out through gaps, causing heating and imposing additional loads on the components. Conversely, the increase in the volume of the enclosed cavity creates a local vacuum, causing dissolved gases in the oil to separate and produce cavitation. These effects result in strong vibration and noise, known as the trapped oil phenomenon in gear pumps. 1) Hazards: Significant radial unbalanced force can cause shaft bending, contact between the gear tips and the housing, accelerated bearing wear, and reduced bearing life. 2) Elimination method: To eliminate trapped oil, relief grooves are typically machined into the side cover plates. When the volume of the enclosed cavity decreases, it communicates with the pressure oil chamber through the left relief groove. When the volume increases, it communicates with the suction oil chamber through the right relief groove.

Weidou Intelligent Technology specializes in selling German scherzinger gear pumps, scherzinger gear pumps, scherzinger diaphragm pumps, scherzinger centrifugal pumps, scherzinger piston pumps, scherzinger vacuum pumps, scherzinger screw pumps, scherzinger submersible pumps, scherzinger peristaltic pumps, scherzinger lubrication pumps, scherzinger vane pumps, scherzinger metering pumps, scherzinger hand pumps, scherzinger drum pumps, scherzinger lobe pumps, scherzinger booster pumps, scherzinger liquid pumps, scherzinger air pumps. Original German imports. Welcome inquiries and orders from users.