German Savino Barbera srl pump Savino Barbera srl model Savino Barbera srl price

Savino Barbera srl pump is a machine that can meter the delivered liquid, often used in various types of chemical dosing skids, therefore also called a dosing pump. It is a special positive displacement pump used to deliver liquids (especially corrosive liquids), which can meet the needs of various strict process flows, with flow rate steplessly adjustable within the range of 0-100%.

Savino Barbera srl pump structure and classification

The pump consists of three parts: motor, transmission box, and cylinder body. The transmission box components consist of a cam mechanism, a stroke adjustment mechanism, and a ratio worm gear mechanism; rotating the adjustment handwheel adjusts the tappet stroke, thereby changing the diaphragm extension distance to achieve the purpose of changing the flow rate. The cylinder body components consist of the pump head, suction valve group, discharge valve group, diaphragm base, etc. Dosing metering pumps can be divided into motor-driven and solenoid-driven types according to the drive. For motor-driven metering pumps, flow regulation can be achieved by using a frequency converter to change the motor speed, or by changing the piston stroke to regulate the flow. Install a servo motor (ATE), rotate left and right to adjust the angle, making the piston stroke larger or smaller. For solenoid-driven flow regulation, the reciprocating frequency of the diaphragm is changed; it can accept the pulse frequency from a flow meter or an analog signal of 4～20mA, and can also accept the analog 4～20mA signal from water quality instruments, with the controller regulating the dosing. Flow can be adjusted manually via buttons, or the dosing amount can be controlled by a controller (PID).

Savino Barbera srl pump working principle

The motor drives the worm shaft via a coupling, and the worm gear reduces speed to cause the main shaft and eccentric wheel to rotate. The eccentric wheel drives the tappet to perform reciprocating motion within the guide tube. Together with the diaphragm, the action of the check valve gradually forms a vacuum in the pump chamber, opening the suction valve to draw in liquid; when the diaphragm moves toward the front dead center, the suction valve closes and the discharge valve opens, expelling the liquid under the push of the diaphragm. The pump operates with reciprocating motion at an adjusted stroke to achieve continuous, pressurized, metered liquid discharge. Flow rate adjustment is achieved by rotating the adjustment handwheel, which turns the adjustment screw, thereby changing the distance between tappets and altering the diaphragm's stroke within the pump chamber to determine the flow rate. The scale on the adjustment handwheel determines the diaphragm stroke, with an accuracy of 95%.

Savino Barbera srl pump precautions

1) What important matters should be noted when operating a dosing system? Injection point pressure, stroke frequency, suction lift height, altitude, and chemical corrosiveness. 2) When the metering pump outlet is at atmospheric pressure, what methods can improve the pump's repeatable metering accuracy? Installing a valve spring on the metering pump discharge valve can improve repeatable metering accuracy, but the most effective improvement method is to install a backpressure valve at the end of the pipeline. 3) How to adjust the backpressure valve? When there is pressure at the suction end of the metering pump, the pressure at the discharge end must be at least 1bar higher than the suction end pressure. Never exceed the maximum working pressure of the metering pump. 4) If the delivered liquid is not water, how is the suction lift height calculated? Divide the rated suction lift height of the metering pump by the specific gravity of the metered liquid. 5) How to set the safety valve pressure? The safety valve pressure can be adjusted within the rated working pressure range of the metering pump and must not exceed the maximum working pressure of the metering pump. The safety valve is designed to prevent overpressure operation of the metering pump. For example, if the maximum working pressure of the metering pump is 3bar, the safety valve pressure should be set to 3bar, or lower, to ensure normal operation of the metering pump. Overpressure operation is one of the main causes of metering pump damage. 6) How to calculate the appropriate volume for a pulse dampener? Multiply the metering capacity per stroke of the metering pump (ml) by 26 to obtain the minimum volume (ml) of the pulse dampener required to reduce 90% pulsation. 7) Under what circumstances is flooded suction used? When the metered liquid is volatile; when the metered liquid has a high specific gravity; when a high stroke frequency is required; when the metering pump operates at high altitudes; and when field applications require large storage tanks and reliance on the metering pump's self-priming capability is not feasible. 8) Can you provide some suggestions regarding metering pump head selection? What problems usually arise concerning chemical corrosion of the pump head/seals, and how can they be avoided? Problems with metering pump heads usually occur when metering acids, chlorine, fluorides, and hydrogen peroxide. Due to different chemical concentrations and operating temperatures, it is difficult to determine the specific pump head material. When metering fluorides, we recommend choosing a Viton sealed PVC pump head. For most chlorination applications, it is best to choose an EPDM sealed NP (plexiglass) pump head. For metering hydrogen peroxide mixtures, only a PTFE sealed PTFE pump head or stainless steel pump head can be selected. For metering concentrated hydrochloric acid, a Viton sealed plexiglass pump head is usually selected. For metering concentrated sulfuric acid, a PTFE sealed PTFE pump head can be selected. Chemical manufacturers will provide relevant recommendations, or consult the ProMinent chemical resistance chart to determine the compatibility of chemicals with contact materials. 9) What influencing factors must be considered when metering liquids with the pump head? The main factors to consider are liquid viscosity, specific gravity, vapor pressure, and temperature.

Weidou Intelligent Technology professionally sells German Savino Barbera srl centrifugal pumps, Savino Barbera srl gear pumps, Savino Barbera srl diaphragm pumps, Savino Barbera srl centrifugal pumps, Savino Barbera srl plunger pumps, Savino Barbera srl vacuum pumps, Savino Barbera srl screw pumps, Savino Barbera srl submersible pumps, Savino Barbera srl peristaltic pumps, Savino Barbera srl lubrication pumps, Savino Barbera srl vane pumps, Savino Barbera srl metering pumps, Savino Barbera srl hand pumps, Savino Barbera srl drum pumps, Savino Barbera srl lobe pumps, Savino Barbera srl booster pumps, Savino Barbera srl liquid pumps, Savino Barbera srl air pumps, original German imports, welcome inquiries and orders from users.