German Norgren sensor Norgren model Norgren price

Norgren sensors are used to measure the robot's own position. Position sensors can be divided into two types: contact sensors and proximity sensors. Sensors that can sense the position of the measured object and convert it into a usable output signal. It is a sensor that can sense the position of the measured object and convert it into a usable output signal. Position sensors can be used to detect position, reflect switches in a certain state. Unlike displacement sensors, position sensors come in two types: contact and proximity.

Norgren sensor classification

Load cells are divided into 8 categories according to conversion methods, including photoelectric, hydraulic, electromagnetic force, capacitive, magnetic pole variation, vibratory, gyroscope, and resistance strain gauge types, with resistance strain gauge being the most widely used. 1) Photoelectric type: Includes grating type and code disk type. Grating sensors use Moiré fringes formed by gratings to convert angular displacement into photoelectric signals. There are two gratings: one fixed grating and one moving grating mounted on the dial shaft. The measured object placed on the weighing platform rotates the dial shaft through the force transmission lever system, driving the moving grating to rotate, causing the Moiré fringes to move accordingly. Using phototubes, conversion circuits, and display instruments, the number of moved Moiré fringes can be calculated to measure the angle of grating rotation, thereby determining and reading the mass of the measured object. Code disk sensors: A code disk (symbol plate) is a piece of transparent glass mounted on the dial shaft, with black and white codes encoded according to a specific coding method. When the measured object on the weighing platform rotates the dial shaft through the force transmission lever, the code disk also rotates by a certain angle. Photocells receive light signals through the code disk and convert them into electrical signals, which are then digitally processed by the circuit, finally displaying the number representing the measured mass on the display. Photoelectric sensors were mainly used in electromechanical combination scales. 2) Hydraulic type: When subjected to the gravity P of the measured object, the pressure of the hydraulic oil increases, and the degree of increase is proportional to P. By measuring the increased pressure value, the mass of the measured object can be determined. Hydraulic sensors have a simple and robust structure and a large measurement range, but the accuracy generally does not exceed 1/100. 3) Capacitive type: It works based on the proportional relationship between the oscillation frequency f of the capacitor oscillator circuit and the distance d between the plates. There are two plates, one fixed and the other movable. When the measured object is loaded on the weighing platform, the leaf spring deflects, changing the distance between the two plates, and the oscillation frequency of the circuit changes accordingly. By measuring the change in frequency, the mass of the measured object on the weighing platform can be calculated. Capacitive sensors consume less power, have low cost, and an accuracy of 1/200 to 1/500.

Norgren sensor features

Resistors, inductors, and capacitors are the three major types of passive components in electronics. Capacitive sensors are sensors that convert changes in the measured quantity into changes in capacitance; they are essentially capacitors with variable parameters. Capacitive sensors have the following advantages: high impedance, low power, requiring only very low input energy. Large changes can be obtained, resulting in high signal-to-noise ratio and system stability. Fast dynamic response, operating frequency up to several megahertz, suitable for non-b contact measurement, and the measured object can be either a conductor or a semiconductor. Simple structure, strong adaptability, can work in harsh environments such as high and low temperatures and strong radiation, and are widely used. With the development of electronic technology and computer technology, the disadvantages of capacitive sensors, such as susceptibility to interference and influence of distributed capacitance, have been continuously overcome, and capacitive grid displacement sensors and integrated capacitive sensors have been developed. Therefore, they are widely used in non-electrical quantity measurement and automatic detection, capable of measuring parameters such as pressure, displacement, speed, acceleration, A degree, thickness, liquid level, humidity, vibration, and component content. Capacitive sensors have good development prospects.

Norgren sensor installation precautions

1) Handle load cells with care, especially small-capacity sensors using aluminum alloy as the elastic body. Any impact or drop caused by vibration is likely to cause significant output errors. 2) When designing the loading device and during installation, ensure that the action line of the loading force coincides with the force axis of the load cell to minimize the effects of inclined and eccentric loads. 3) Regarding level adjustment. If a load cell is used, the installation plane of its base must be adjusted with a level until horizontal; if multiple sensors are used for simultaneous measurement, their base installation surfaces should be kept as level as possible. The main purpose of this is to ensure that the force borne by each sensor is basically consistent. 4) Determine the rated load of the sensor used according to the load cell capacity selection in its instructions. 5) To prevent chemical corrosion, it is advisable to coat the outer surface of the load cell with Vaseline during installation. Avoid use in places with direct sunlight exposure and drastic environmental temperature changes. 6) Add bypasses made of copper braided wire at both ends of the load cell loading device. 7) Cable lines should not be extended arbitrarily. If extension is truly necessary, solder the joints with tin and add moisture-proof sealant. 8) It is best to use some baffles around the load cell to cover the sensor. The purpose of this is to prevent debris from falling into the moving parts of the sensor, affecting its measurement accuracy. 9) The sensor cable should be kept away from high-power power lines or places with pulse waves. If avoidance is impossible, the load cell cable should be threaded separately into an iron pipe, and the connection distance should be shortened as much as possible. 10) Determine the rated load of the sensor used according to the load cell capacity selection in its instructions. Although load cells have a certain overload capacity, such situations should be avoided as much as possible during installation and use. Sometimes short-term overload may cause permanent damage to the sensor. 11) For high-precision applications, the load cell and instrument should be used after preheating for 30 minutes.

Weidou Intelligent Technology professionally sells German Norgren sensors, Norgren proximity sensors, Norgren distance sensors, Norgren vision sensors, Norgren displacement sensors, Norgren torque sensors, Norgren speed sensors, Norgren photoelectric sensors, Norgren position sensors, Norgren angle sensors, Norgren tactile sensors, Norgren temperature sensors, Norgren pressure sensors, Norgren flow sensors, Norgren level sensors, Norgren motion sensors, Norgren process sensors, original German imports, welcome users to consult and order.