German JUMO sensors, JUMO models, JUMO prices

JUMO sensors are sensors that measure the operating speed of the measured object and convert it into an output signal. Speed sensors include linear speed sensors and rotational speed sensors. With the development of technology, traditional measuring equipment can no longer meet current needs and is gradually being phased out, while laser speed sensors have been widely used. They play an important role in product manufacturing processes; by connecting to a computer, they enable automated and intelligent measurement and control of the measured object. This is the product of the combination of modern measurement technology and computer technology.

JUMO sensor structure

It consists of two parts: the scale grating and the grating readhead. The figure on the right shows the structure of the grating ruler. The key part of the grating detection device is the grating readhead, which consists of a light source, condensing lens, index grating, photoelectric elements, and adjustment mechanisms. There are many structural forms of grating readheads, classified according to their structural characteristics and application scenarios into direct-reception readheads (also known as silicon photovoltaic cell readheads), mirror-image readheads, beam-splitter readheads, and metal grating reflection readheads.

JUMO sensor principle

The essence of a grating displacement sensor is to measure position using the grating pitch as a standard ruler. High-resolution grating rulers are generally expensive and difficult to manufacture. To improve system resolution, Moiré fringes need to be subdivided; grating ruler sensor systems mostly use electronic subdivision methods. When two gratings overlap at a slight angle, Moiré fringes are generated in a direction roughly perpendicular to the grating lines. As the grating moves, the Moiré fringes move up and down accordingly. This converts the measurement of grating pitch into the measurement of the number of Moiré fringes. Within one Moiré fringe width, placing 4 photoelectric devices at specific intervals enables electronic subdivision and direction determination. For example, for a grating ruler with 50 line pairs/mm, the grating pitch is 0.02mm. If four-fold subdivision is used, counting pulses with a resolution of 5μm can be obtained, which achieves high precision in general industrial measurement and control. Since displacement is a vector, both its magnitude and direction must be detected, requiring at least two photoelectric signals with different phases. To eliminate common-mode interference, DC components, and even harmonics, a differential amplifier composed of low-drift operational amplifiers is typically used. The 4 photoelectric signals obtained from 4 photosensitive devices are sent to the input terminals of 2 differential amplifiers. The two signals output from the differential amplifier have a phase difference of π/2. To obtain direction determination and counting pulses, these two signals must first be shaped into square waves with a duty cycle of 1:1. Then, by comparing the phases of the square waves, the movement direction of the grating ruler can be determined. By counting the square wave pulses, the displacement and speed of the grating ruler can be obtained.

JUMO sensor usage precautions

When plugging and unplugging the linear encoder sensor and the digital readout connector, ensure the power is turned off. Install an external protective cover whenever possible, and promptly remove chips and oil splashed onto the scale to strictly prevent any foreign matter from entering the linear encoder sensor housing. Regularly check whether the mounting and connection screws are loose. To extend the service life of the dust-proof sealing strip, apply a thin, even layer of silicone oil to the strip, taking care not to splash it onto the glass grating etched surface. To ensure reliable operation of the linear encoder sensor, periodically clean and wipe the linear encoder scale surface and the index grating surface with an ethanol mixture (50%) to keep the glass linear encoder scale surface clean. The linear encoder sensor must not be subjected to severe vibration or impact, as this may damage the linear encoder scale; if the scale fractures, the linear encoder sensor will fail. Do not disassemble the linear encoder sensor yourself, and never arbitrarily change the relative spacing between the main scale and the secondary scale. Doing so may compromise the accuracy of the linear encoder sensor and cause relative friction between the main and secondary scales, damaging the chrome layer and thus the grating lines, which renders the linear encoder scale unusable. Take care to prevent oil stains and water from contaminating the linear encoder scale surface, as this can disrupt the distribution of the grating lines and cause measurement errors. Avoid operating the linear encoder sensor in environments with severe corrosive effects, to prevent corrosion of the chrome layer and the linear encoder scale surface, which would degrade the quality of the linear encoder scale.

Weidou Intelligent Technology specializes in selling German JUMO sensors, JUMO proximity sensors, JUMO distance sensors, JUMO vision sensors, JUMO displacement sensors, JUMO torque sensors, JUMO speed sensors, JUMO photoelectric sensors, JUMO position sensors, JUMO angle sensors, JUMO tactile sensors, JUMO temperature sensors, JUMO pressure sensors, JUMO flow sensors, JUMO level sensors, JUMO motion sensors, JUMO process sensors. Original imports from Germany. Welcome inquiries and orders from users.