German Brocind srl valves, Brocind srl models, Brocind srl prices

With a constant pressure differential across the Brocind srl valve, the flow rate of a standard valve changes little when the opening varies over a wide range, but changes sharply at a certain opening, indicating poor regulation performance. A control valve adjusts the valve core stroke according to the direction and magnitude of the signal to change the valve's resistance coefficient, thereby achieving flow regulation. Control valves are divided into manual and automatic types, each with various subtypes offering different regulation performances. Automatic control valves include self-operated flow control valves and self-operated differential pressure control valves, among others.

Brocind srl valve connection method: threaded connection

This is a simple connection method, commonly used for small valves. It falls into two categories: 1) Direct sealing: the internal and external threads directly provide the seal. To ensure no leakage at the connection, lead oil, hemp, and PTFE raw material tape are often used as fillers; PTFE tape is increasingly widely used. This material has excellent corrosion resistance, provides an excellent seal, and is convenient to use and store. It can be removed intact during disassembly because it is a non-adhesive film, making it far superior to lead oil and hemp. 2) Indirect sealing: the tightening force of the thread is transmitted to the gasket between the two planes, allowing the gasket to provide the seal.

Brocind srl valve sealing requirements

The sealing performance of a valve refers to the ability of its sealing parts to prevent medium leakage, which is the most important technical performance indicator of a valve. There are three sealing locations in a valve: the contact area between the two sealing surfaces of the closing member and the valve seat; the mating area between the packing, the valve stem, and the stuffing box; and the connection area between the valve body and the bonnet. Leakage at the first location is called internal leakage, commonly known as incomplete closure, which affects the valve's ability to cut off the medium. For shut-off valves, internal leakage is not permitted. Leakage at the latter two locations is called external leakage, where the medium leaks from inside the valve to the outside. External leakage causes material loss, environmental pollution, and can even lead to accidents in severe cases. For flammable, explosive, toxic, or radioactive media, external leakage is strictly prohibited; therefore, valves must have reliable sealing performance.

Brocind srl valve advantages

The electric ball valve structure consists of only a few components, saving material usage; it features a small volume, light weight, compact installation dimensions, low driving torque, simple and agile operation, and allows rapid opening and closing by rotating just 90°. It also offers good flow regulation efficiency and tight sealing characteristics. In applications involving large to medium diameters and medium to low pressures, the electric ball valve is the dominant valve type. When the electric ball valve is fully open, the disc thickness is the only resistance to the medium flowing through the valve body, resulting in a very small pressure drop and thus good flow control characteristics. Electric ball valves come in two sealing types: elastic sealing and metal sealing. For elastic sealing valves, the sealing ring can be embedded in the valve body or attached to the periphery of the disc. Valves with metal sealing generally have a longer service life than those with elastic sealing, but it is difficult to achieve complete sealing. Metal sealing can withstand higher operating temperatures, whereas elastic sealing has the disadvantage of being limited by temperature. If an electric ball valve is required for flow control, it is important to accurately select the valve size and type. The structural principle of the electric ball valve is particularly suitable for manufacturing large-diameter valves. Electric ball valves are not only widely used in general industries such as petroleum, gas, chemical, and water treatment, but also in the cooling water systems of thermal power plants. Common electric ball valves include wafer-type and flanged-type. Wafer-type electric ball valves are connected between two pipe flanges using double-headed bolts, while flanged-type electric ball valves have flanges on the valve itself, which are bolted to the pipe flanges. The strength performance of a valve refers to its ability to withstand medium pressure. As a mechanical product subjected to internal pressure, a valve must have sufficient strength and stiffness to ensure long-term use without rupture or deformation. A pneumatic ball valve consists of a ball valve equipped with a pneumatic actuator. Pneumatic actuators are divided into double-acting and single-acting types, controlled by solenoid valves to realize the switching action of the ball valve. Pneumatic ball valves enable intelligent control, rapid opening or closing of pipelines, and effective control and management of the pipeline network.

Weidou Intelligent Technology specializes in selling German Brocind srl valves, Brocind srl safety valves, Brocind srl globe valves, Brocind srl control valves, Brocind srl solenoid valves, Brocind srl ball valves, Brocind srl proportional valves, Brocind srl diaphragm valves, Brocind srl butterfly valves, Brocind srl hydraulic transmission valves, Brocind srl check valves, Brocind srl pressure reducing valves, Brocind srl relief valves, Brocind srl sequence valves, Brocind srl balance valves, Brocind srl throttle valves, and Brocind srl directional control valves. Original imports from Germany. Welcome inquiries and orders from customers.