German BRILEX valves BRILEX models BRILEX prices

BRILEX valves are used to prevent backflow of the medium, opening automatically using the kinetic energy of the fluid itself and closing automatically during reverse flow. They are commonly installed at pump outlets, steam trap outlets, and other locations where reverse fluid flow is not permitted. Check valves are classified into three types: swing check, lift check, and wafer check. For swing check valves, the fluid can only flow from left to right; they close automatically during reverse flow. For lift check valves, when the fluid flows from left to right, the valve disc lifts to form a passage; during reverse flow, the disc is pressed against the valve seat to close. For wafer check valves, when the fluid flows from left to right, the valve disc opens to form a passage; during reverse flow, the disc is pressed against the valve seat to close. Wafer check valves allow multi-position installation, have small volume, light weight, and compact structure.

BRILEX valve industry applications

Ball valves are widely used in oil refining, long-distance pipelines, chemical industry, papermaking, pharmaceuticals, water conservancy, electric power, municipal engineering, steel, and other industries, occupying a pivotal position in the national economy. It features a rotation of 90 degrees, with a spherical plug body having a circular through-hole or channel along its axis. Ball valves are mainly used in pipelines for shut-off, distribution, and changing the flow direction of the medium. They require only a 90-degree rotation and minimal torque to achieve tight shut-off. Ball valves are most suitable for use as on/off and shut-off valves, V type ball valve. In addition to pipeline parameters, special attention should be paid to the environmental conditions for electric valves, as the electric actuator in an electric valve is an electromechanical device whose operating status is significantly affected by the environment. Typically, special care is required when using electric ball valves and butterfly valves in the following environments. [1]

BRILEX valve performance testing precautions

1) When valves of a specific specification are manufactured in batches, an official agency should be commissioned to perform the following performance tests: (1) opening and closing torque of the valve under working pressure conditions; (2) flow resistance coefficient of the valve under pipeline water transmission conditions. 2) The following tests should be performed on valves before factory shipment: (1) with the valve in the open position, the valve body shall withstand an internal pressure test at twice the valve's working pressure; (2) with the valve in the closed position, both sides shall separately withstand 11 times the valve's working pressure without leakage; however, for metal-sealed butterfly valves, the leakage value shall not exceed relevant requirements.

BRILEX valve installation instructions

Butterfly valves have a simple structure, small volume, and light weight, with relatively few components; just a few key parts constitute the butterfly valve. Opening is very convenient, requiring only turning the switch to ninety degrees. Butterfly valves provide excellent control over fluid flow, allowing flow rate to be increased or decreased at any time. Valves exhibit certain resistance when transporting any fluid, and the resistance of a butterfly valve mainly comes from itself, such as the thickness of the butterfly valve body. To reduce fluid resistance, one only needs to reduce its thickness. Elastic seals have the disadvantage of being limited by temperature. The application range of butterfly valves is also quite broad. If used for flow control, different types and valve body sizes need to be selected, as butterfly valves are inherently suitable for larger diameters during design. Butterfly valves are not only widely used in general industries such as petroleum, gas, chemical, and water treatment, but are also applied in cooling water systems of thermal power stations.

Weidou Intelligent Technology professionally sells German BRILEX valves, BRILEX safety valves, BRILEX globe valves, BRILEX control valves, BRILEX solenoid valves, BRILEX ball valves, BRILEX proportional valves, BRILEX diaphragm valves, BRILEX butterfly valves, BRILEX hydraulic actuated valves, BRILEX check valves, BRILEX pressure reducing valves, BRILEX relief valves, BRILEX sequence valves, BRILEX balance valves, BRILEX throttle valves, BRILEX directional control valves, original German imports. Welcome customers to inquire and order.