STRACK hose fittings, Germany STRACK models, STRACK prices

STRACK hose fittings are widely used in high-pressure piping applications in industrial fields, such as shipbuilding, offshore oil, metal processing, and mining. Flared tube fittings are suitable for hydraulic, lubrication, high-pressure water flushing, and high-pressure air pipelines. Flared tube fittings have been certified by many auditing bodies; they offer high reliability, inherent cleanliness, and strong flexibility, with faster and simpler pre-processing assembly and installation. The flared connection requires no welding, saving subsequent processes such as pickling and flaw detection. Flared tube fittings are a type of quick-connect fitting suitable for various pipe fittings and tubes with nominal pressures not exceeding 32MPa. Introduction to flared connection manufacturers: widely used in industries such as oil refining, chemical engineering, light industry, textiles, national defense, metallurgy, aviation, automotive, pharmaceuticals, machinery, shipbuilding, natural gas, and CNG refueling stations.

STRACK hose fitting applications

Elbows are commonly used connecting fittings in plumbing installations, used for connections at pipe bends to change the direction of the pipeline. Other names: 90° elbow, right-angle elbow, ai'er elbow, stamped elbow, pressed elbow, machined elbow, welded elbow, etc. Purpose: Connect two pipes with the same or different nominal diameters, enabling the pipeline to make 90°, 45°, 180°, and turns of various degrees. A bend radius less than or equal to 1.5 times the pipe diameter is classified as an elbow, while greater than 1.5 times the pipe diameter is classified as a bent pipe. A commonly used connecting fitting in pipeline installation, connecting two pipes with the same or different nominal diameters to enable the pipeline to turn at a certain angle, with a nominal pressure of 1-1.6Mpa.

STRACK hose fitting selection

Unidirectional flow type: Rotary joints are installed at both ends of the drum; fluid enters from one end and exits from the other, without using an inner pipe. Unidirectional flow type: A rotary joint is installed at one end of the drum, where fluid is both introduced and discharged; the inner pipe remains stationary relative to the rotation of the drum. Bidirectional flow type (inner pipe fixed): Different from the above, this type contains different forms of siphon tubes inside the drum to discharge condensate; this type is mostly used for steam applications. Bidirectional flow type (inner pipe rotating): This type is used in structures where the inner pipe is relatively fixed to the drum and rotates synchronously with it; in this case, fluid is introduced through the inner pipe and discharged through the outer pipe. Bidirectional flow type (inner pipe rotating): A siphon device that rotates synchronously with the drum is installed inside the drum to discharge condensate; this type is mostly used for steam applications.

STRACK hose fitting choice

Y-shaped three-way metal hose fitting: one end connects to thin-wall steel electrical conduit, and the other two ends connect to metal hoses via metal fittings. The metal fittings are die-cast from zinc alloy, with galvanized, matte, or chrome-plated surfaces; compact structure, no pores, high strength. Reliable connection with metal hoses, aesthetically pleasing appearance; customizable non-standard metal hose fittings and special metal fittings are available. T-shaped three-way metal hose fitting: one end connects to thin-wall steel electrical conduit, and the other two ends connect to metal hoses via metal fittings. The metal fittings are die-cast from zinc alloy, with galvanized, matte, or chrome-plated surfaces; compact structure, no pores, high strength. Reliable connection with metal hoses, aesthetically pleasing appearance. 90-degree elbow fitting: Thread specification: After engagement with British threads, it forms a 90-degree angle with the enclosure box. Made of thickened zinc alloy, aesthetically pleasing appearance, compact structure, high strength. In addition to the standard specifications below, sizes and thread standards can be arbitrarily varied according to requirements.

Weidou Intelligent Technology specializes in selling German STRACK oil pipe fittings, STRACK hose fittings, STRACK pipe fittings, STRACK pipe component fittings, STRACK rotary joints, STRACK metal fittings, STRACK brass fittings, STRACK stainless steel fittings, STRACK plastic fittings, STRACK hydraulic pipe fittings, STRACK adapter fittings, STRACK threaded pipe fittings, STRACK straight-through fittings, STRACK articulated fittings, STRACK compression fittings, STRACK original imports from Germany. Welcome customers to inquire and order.