Sommer hose fittings Germany Sommer model Sommer price

Sommer hose fittings connect different hydraulic components to form a closed-loop hydraulic system, serving as a connecting accessory. They connect different hydraulic components (pumps, delivery lines, directional valves, shut-off valves, hydraulic motors, hydraulic cylinders, and auxiliary components such as level gauges, thermometers, and pressure gauges) to form a closed-loop hydraulic system, acting as a connecting accessory.

Sommer hose fitting precautions

Three-way water pipe fittings, solutions for quick-connect water pipe fittings; this method is very fast. Many friends may not be particularly familiar with high-pressure quick-connect water pipe fittings. In fact, these fittings allow for rapid connection in faucets, spray guns, and water pipelines. This method is labor-saving and especially convenient. The method for quick-connecting high-pressure water pipes is as follows: First, install quick-connect fittings on both ends of the water pipe, gently tightening the adjacent nuts. Next, connect to the faucet fitting or use the spray gun fitting. If you hear a "click" during this process, it indicates that the high-pressure water pipe quick-connect fitting has been successfully completed. Closed water pipe fitting method: When the mold fittings and mold water nozzles in high-pressure water pipe quick-connect fittings are closed, the male and female heads block the fluid channel under the force of their respective pins and springs when disconnected. The pins of both the male and female heads close individually, instantly blocking fluid flow. When connected, inserting the male head into the female head causes the pins to return to their original positions under spring action. Steel balls roll to lock, ensuring a tight connection between the male and female heads. Simultaneously, the pins of the male and female heads push against each other to open, allowing fluid flow. The O type ring in the high-pressure water pipe quick-connect fitting completely prevents fluid leakage.

Sommer hose fitting precautions

Hoses must not be bent excessively during movement or when stationary, nor bent at the base. Bending should start at least at 1.5 times the diameter; when the hose moves to an extreme position, it should not be pulled too tight but remain relatively slack. Avoid twisting deformation of the hose as much as possible. Keep the hose as far away from heat-radiating components as possible, installing heat shields if necessary. Avoid external damage to the hose, such as long-term friction against component surfaces during use. If the hose's own weight causes excessive deformation, supports should be provided.

Sommer hose fitting applications

Elbows are commonly used connecting fittings in plumbing installation, used for connections at pipe bends to change the direction of the pipeline. Other names: 90° elbow, right-angle elbow, air elbow, stamped elbow, pressed elbow, machined elbow, welded elbow, etc. Applications: Connect two pipes with the same or different nominal diameters, enabling the pipeline to make 90°, 45°, 180°, and turns of various degrees. A bending radius less than or equal to 1.5 times the pipe diameter is classified as an elbow, while greater than 1.5 times the pipe diameter is classified as a bend. A commonly used connecting fitting in pipeline installation, connecting two pipes with the same or different nominal diameters to allow the pipeline to turn at a certain angle, with a nominal pressure of 1-1.6Mpa.

Weidou Intelligent Technology specializes in selling German Sommer oil pipe fittings, Sommer hose fittings, Sommer pipe fittings, Sommer pipe component fittings, Sommer rotary joints, Sommer metal fittings, Sommer brass fittings, Sommer stainless steel fittings, Sommer plastic fittings, Sommer hydraulic pipe fittings, Sommer adapter fittings, Sommer threaded pipe fittings, Sommer straight-through fittings, Sommer articulated fittings, Sommer compression fittings, Sommer original German imports. Welcome customers to inquire and order.