RX multiservis hose fittings German RX multiservis models RX multiservis prices

RX multiservis hose fittings connect different hydraulic components (pumps, delivery lines, directional control valves, shut-off valves, hydraulic motors, hydraulic cylinders, and some auxiliary components such as level gauges, thermometers, pressure gauges, etc.) to form a closed-loop hydraulic system. Hydraulic pipe fittings serve as connecting accessories in this system. Hydraulic pipe fittings are detachable connectors between oil pipes and oil pipes, or between oil pipes and hydraulic components. They should meet requirements such as easy assembly and disassembly, reliable connection, reliable sealing, small external dimensions, high oil flow capacity, low pressure loss, and good manufacturability. Hydraulic pipe fittings are widely used in various aspects of our lives. They are mainly used in hydraulic piping systems across industries such as energy, petrochemicals, electric power, shipbuilding, automotive, rail transit, mining, metallurgy, steel mills, offshore engineering, and construction machinery. Construction machinery is where hydraulic pipe fittings are most extensively used.

RX multiservis hose fitting classification

Flexible elbows, compression-type elbows, flanged-edge elbows, quick-install elbows, base-mounted elbows, flange elbows, 180° elbows, double-socket elbows, single-socket elbows, socket-and-spigot elbows, reducing elbows, seamless elbows, butt-weld elbows, 90° elbows, 45° elbow assemblies, tees, internal-thread elbows, stamped elbows, push-formed elbows, high-pressure elbows, wear-resistant elbows, mechanical elbows, flange-type elbows, groove-type elbows, three-dimensional elbows, external-thread elbows, threaded elbows, special-purpose elbows, waterproof elbows

RX multiservis hose fitting installation

1. Cut the seamless steel tube to the appropriate length and remove burrs from the port. The tube end face must be perpendicular to the axis, with an angular tolerance not greater than 0.5°. If the tube needs to be bent, the straight-line distance from the tube end to the bend must be at least three times the nut length. 2. Slide the nut and ferrule onto the seamless steel tube. Pay attention to the orientation of the nut and ferrule; do not install them backwards. 3. Apply lubricating oil to the threads of the pre-assembled fitting body and the ferrule. Insert the tube into the fitting body (the tube must be fully inserted) and hand-tighten the nut. 4. Tighten the nut until the ferrule grips the tube. This transition point can be felt by an increase in tightening torque (pressure point). 5. After reaching the pressure point, tighten the compression nut an additional 1/2 turn. 6. Remove the pre-assembled fitting body and inspect the embedding of the ferrule cutting edge. The visible raised ring must fill the space at the ferrule end face. The ferrule may rotate slightly but must not move axially. 7. For final installation, apply lubricating oil to the threads of the fitting body in the actual installation. Screw on the compression nut until an increase in tightening torque is felt. Then tighten an additional 1/2 turn to complete the installation.

RX multiservis hose fitting specifications

Quick-connect fittings mainly include brass fittings, plastic fittings, and stainless steel fittings. Pneumatic quick-connect fittings are primarily used for air piping and pneumatic tools, allowing pipeline connection or disconnection without tools. Fitting specifications are divided into: PC straight connectors, PL elbow connectors, PB center-run tee connectors, PD branch-run tee connectors, PXY type center-run connectors, PE reducing tee connectors, PE full-insertion tee connectors, PY tee Y type connectors, PN series Y type reducing connectors, PV straight double-insertion connectors, PU straight double-insertion connectors, PG straight reducing connectors, PZ cross-type four-way full-insertion connectors, PHZ cross-type four-way reducing connectors, ZR four-way threaded connectors, PLL extended right-angle connectors, PLM right-angle bulkhead connectors, PLF right-angle female-thread connectors, etc.

Weidou Intelligent Technology specializes in selling German RX multiservis oil pipe fittings, RX multiservis hose fittings, RX multiservis pipe fittings, RX multiservis pipe component fittings, RX multiservis rotary joints, RX multiservis metal fittings, RX multiservis brass fittings, RX multiservis stainless steel fittings, RX multiservis plastic fittings, RX multiservis hydraulic pipe fittings, RX multiservis adapter fittings, RX multiservis threaded pipe fittings, RX multiservis straight connectors, RX multiservis articulated joints, RX multiservis compression fittings, RX multiservis original German imports. Customers are welcome to inquire and place orders.