Philips hose connector Germany Philips model Philips price

Philips hose connector is a type of hose connector mainly composed of three parts. Metal hose connectors are used in many places. The main component of the metal hose connector, the bendable part, is made of braided metal wire. Metal hose connectors offer good performance and come in a wide variety. Different types of metal hose connectors have different characteristics, structures, and maximum temperature ratings.

Philips hose connector manufacturing process

Stamping forming: Stamping forming elbows were the earliest forming process applied to the mass production of seamless elbows. In the production of common specification elbows, this method has been replaced by hot pushing or other forming processes. However, it is still used for certain elbow specifications due to low production volumes, excessively thick or thin wall thicknesses, or special product requirements. Stamping forming of elbows uses pipe blanks with an outer diameter equal to that of the elbow, which are directly pressed into shape in a die using a press. Before stamping, the pipe blank is placed on the lower die, and the inner mandrel and end die are inserted into the blank. The upper die moves downward to begin pressing, forming the elbow through the constraint of the outer die and the support of the inner die. Compared with the hot pushing process, the surface quality of stamping forming is inferior. During the forming of stamped elbows, the outer arc is in a stretched state, with no excess metal from other areas to compensate, so the wall thickness at the outer arc is reduced by approximately 10%. However, due to its suitability for single-piece production and low cost, the stamped elbow process is often used for small-batch, thick-walled elbow manufacturing. Stamped elbows are divided into cold stamping and hot stamping; the choice between cold and hot stamping is usually based on material properties and equipment capabilities. The cold extrusion forming process for elbows uses a dedicated elbow forming machine. The pipe blank is placed in the outer die, and after the upper and lower dies close, the blank moves through the gap reserved between the inner and outer dies under the push of a push rod, completing the forming process. Elbows manufactured using the inner and outer die cold extrusion process have an attractive appearance, uniform wall thickness, and small dimensional deviations. Therefore, this process is widely used for forming stainless steel elbows, especially thin-walled stainless steel elbows. This process requires high precision for the inner and outer dies and has strict requirements for the wall thickness deviation of the pipe blanks.

Philips hose connector classification

Can copper pipes use compression tube fittings? Yes, copper pipe connections can use compression tube fittings. Common fittings for copper pipe connections include: compression copper pipe fittings; quick-connect copper pipe fittings; flare-type copper pipe fittings; u type copper pipe fittings. Compression tube fittings are sealed pipe fittings suitable for non-corrosive or corrosive media such as oil, water, and gas. They offer flexible specification requirements when used with aluminum-plastic composite pipes. After connection to the pipeline, they feature reliable connections and good sealing performance. Therefore, they are widely adopted in systems such as oil refining, chemical industry, light industry, textiles, national defense, metallurgy, aviation, and shipping. They are also suitable for hydraulic transmission pipelines in various mechanical engineering and machine tool equipment. Compression tube fittings are a type of hard-seal fitting. They form a seal by using the nut and body to compress the ferrule into the outer wall of the steel pipe. They are generally used on high-pressure pipelines, including steel pipes, copper pipes, and iron pipes.

Philips hose connector classification

When disconnected: When the sleeve of the female body moves to the other end, the stainless steel balls automatically roll outward. The male body disconnects under the combined spring force of the valves in the female and male bodies. The valves in both the male and female bodies close, instantly blocking fluid flow. When connected: When the male body is inserted into the female body, the sleeve returns to its original position under the action of the spring. The steel balls roll to lock the male body tightly. At the same time, the valves in the female and male bodies push against each other to open, allowing fluid flow. The O O-ring completely prevents fluid leakage. Disconnected: When the sleeve of the female body is pushed to the other end, the steel balls automatically roll outward, causing the male body to be removed. Since neither the male nor the female body has valves, fluid flows out. When connected: When the male body is inserted into the female body, the sleeve is pushed back to its previous position by the spring force, causing the steel balls to lock. Fluid flows, and the O O-ring prevents liquid leakage. Disconnected: When the sleeve of the female body moves to the other end, the stainless steel balls automatically roll outward. The male body is pushed away by the reaction force of the valve springs, and the valves automatically close to block fluid flow. When connected: When the male body is inserted into the side of the female body with the sleeve, the valves open, allowing fluid flow. The gasket is pushed back to its original position by the spring force. The stainless steel balls lock to ensure the male/female connection, and the internal gasket completely prevents fluid leakage.

Weidou Intelligent Technology specializes in selling German Philips oil hose connectors, Philips hose connectors, Philips pipe fittings, Philips pipe fittings, Philips rotary joints, Philips metal connectors, Philips brass connectors, Philips stainless steel connectors, Philips plastic connectors, Philips hydraulic hose connectors, Philips adapter connectors, Philips threaded pipe connectors, Philips straight connectors, Philips articulated connectors, Philips compression fittings, Philips original German imports. Customers are welcome to inquire and order.