OMFB hose connector Germany OMFB model OMFB price

OMFB hose connectors are also known as pipe fittings tees, tee fittings, or tee joints. They are mainly used to change the direction of fluid flow and are installed where branch pipes diverge from the main pipeline. They can be classified by pipe diameter. They are generally made of carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon chloride, pvc, and other materials. A tee pipe is a type of chemical pipe fitting. It is a pipe connector with three openings: one inlet and two outlets, or two inlets and one outlet. The materials for tee pipes include plastic, glass, cast steel, cast copper, and cast iron, primarily because the media they transport differ. Tee pipes have equal-diameter ports and reducing ports, mainly used to change the direction of fluid flow. They are applied in fields such as medicine, water conservancy, and construction.

OMFB hose connector precautions

Before installation, all steel pipes may first undergo pickling treatment according to the requirements of Chapter 9, especially steel pipes connected with compression-type pipe fittings; then the ferrule should be pre-tightened onto the pipe end; (2) all pipe fittings should be cleaned with kerosene before installation, and the o-type O-rings inside should be temporarily removed and stored, to be placed back during formal installation; (3) during construction, keep the oil ports of pumps, distributors, and other equipment, as well as the openings of pipe fittings and pipe ends, clean to prevent water, dust, and other foreign matter from entering; (4) pipelines should be laid in a free state; do not apply excessive radial force to forcibly fix and connect welded pipelines; (5) check the oil holes of bearing housings in advance to ensure internal oil passages are unobstructed and that the oil port threads match the fittings.

OMFB hose connector classification

For combined air and liquid use, mainly for piping in ion cooling devices, brewing equipment, cutting oil piping for machine tools, and car wash machines. Connection via simple lever operation allows the transfer of liquids, gases, powders, etc. Body materials, sizes, and installation shapes are diverse. Precautions for use: Do not use with fluids other than the applicable fluid. Do not exceed the maximum operating pressure during use. Do not use outside the operating temperature range to prevent wear or leakage of sealing materials. Do not disassemble; use sealant for external pipe threads. During installation, do not exceed the maximum torque to prevent damage. Do not use for purposes other than quick couplings. Do not connect with quick fluid couplings from other manufacturers. Do not subject to artificial impact, bending, or stretching to prevent damage. Do not use in environments containing metal powder or sand/dust to prevent malfunction or leakage. Attachment of debris will cause malfunction or leakage. A brake valve must be installed before the quick coupling. Do not use as a hinge joint. Use in machinery with vibration or shock will reduce durability. For steel and iron quick couplings, do not use water or glycol-based media, as the zinc coating on the surface will dissolve. The fluid used must be clean fluid filtered through a filter. "O" O-rings must always remain in an oiled state during use. For hydraulic applications, the body material should be metal resistant to vibration and shock. Sizes and installation shapes are diverse. Precautions for use: Do not use with fluids other than the applicable fluid. Do not exceed the maximum operating pressure limit of the quick-change coupling during use. Do not use outside the operating temperature range to prevent wear or leakage of sealing materials. Do not disassemble when hydraulic pressure is present; use thread-specific sealant for external pipe threads. During installation, do not exceed the maximum torque to prevent damage. Do not use for purposes other than quick couplings. Do not connect with quick fluid couplings from other manufacturers. Do not subject to artificial impact, bending, or stretching to prevent damage. Do not use in environments containing metal powder or sand/dust to prevent malfunction or leakage. Attachment of debris will cause malfunction or leakage. A brake valve must be installed before the quick coupling. Do not use as a hinge joint. Use in machinery with vibration or shock will reduce durability. Do not use water or glycol-based media, as these substances will cause the surface zinc coating to dissolve. The fluid used must be clean fluid filtered through a filter. "O" O-rings must always remain in an oiled state during use. The fluid flow rate during use should be kept below 8m/s. Refer to the end section of these precautions to confirm suitable sealing and body materials for the fluid used.

OMFB hose connector installation

Cleaned pipelines should be formally installed and greased as soon as possible. Tighten all pipe fittings segment by segment according to the printed matching marks, ensuring the originally removed o-type O-rings are inserted. All piping fixtures must be secure and not loose. All oil supply lines can be connected to the distributor outlets and lubrication points after greasing. Metric general-purpose threads are denoted by uppercase M. Metric general-purpose threads are divided into coarse-pitch and fine-pitch threads based on pitch. Coarse-pitch thread markings generally do not specify the pitch, e.g., M20 indicates coarse-pitch thread. Fine-pitch thread markings must specify the pitch. Threads are used for connection and fastening between mechanical parts. Coarse-pitch threads are commonly used for threaded connections, while fine-pitch threads have slightly higher strength and better self-locking performance than coarse-pitch threads of the same nominal diameter. Pipe threads sealed by threads can prevent leakage without adding filler or sealant. Thread-sealed pipe threads have two connection forms: cylindrical internal thread with conical external thread, and conical internal thread with conical external thread. The former connection is sufficiently tight, while the latter is typically used only under high temperature and high pressure conditions.

Weidou Intelligent Technology professionally sells German OMFB oil pipe connectors, OMFB hose connectors, OMFB pipe connectors, OMFB pipe fitting connectors, OMFB rotary joints, OMFB metal connectors, OMFB brass connectors, OMFB stainless steel connectors, OMFB plastic connectors, OMFB hydraulic pipe connectors, OMFB adapter connectors, OMFB threaded pipe connectors, OMFB straight connectors, OMFB swivel connectors, OMFB compression fittings, OMFB original German imports. Welcome customers to inquire and order.