multiservis hose fittings Germany multiservis model multiservis price

multiservis hose fittings refer to threaded pipe connectors, which are the most common type of pipe fittings in industrial and daily applications. They are mainly used for small-diameter low-pressure pipelines, for locations requiring frequent assembly and disassembly, or as final adjustments for pipelines using threaded fittings. The structural form should preferably adopt a metal-to-metal contact seal; gasket seal structures are typically used in general pipelines transporting water, oil, air, etc., and are manufactured from malleable cast iron. The significance of threaded fittings is that they make pipe connections simpler and disassembly/replacement easier, greatly saving the cost of pipe connections. They are mainly used for small-diameter low-pressure pipelines, for locations requiring frequent assembly and disassembly, or as final adjustments for pipelines using threaded fittings. Features of threaded fittings: high joint strength and good ductility, allowing full utilization of the strength and ductility of the base steel material. Connection is convenient, fast, and simple to operate. No electricity, gas, or open flame is required during construction connection; there is no oil leakage or pollution. They are corrosion-resistant, leak-proof, anti-detachment, safe, and have a long service life. Application fields: fluid and gas transmission systems in industries related to hydraulics, such as automotive, engineering machinery, lathes, machines, metallurgy, petroleum, mining, construction, chemical industry, shipbuilding, aerospace, military industry, textiles, marine, entertainment, electronics, etc.

multiservis hose fitting installation

Before installing drain pipes, first check the water pipes and connection accessories for damage, cracks, or other defects. When installing drain pipes, consider the thickness of the wall tiles in advance. Use as few or no connection accessories as possible under walls and floors to reduce the risk of leakage, and ensure that the installation of connection accessories is secure and leak-free. When designing drain pipes, consider the installation position of the washing machine faucet and the layout of the drainage, and also check whether the position of the power socket is suitable.

multiservis hose fitting selection

Depending on the application, there is a rich variety of body materials, sizes, and installation shapes. Quick-connect fittings for gas are mainly used for general fuse piping, featuring high flow rate, durability, and corrosion resistance. Body materials, sizes, and installation shapes are diverse. Quick-connect fittings for both gas and liquid are mainly used for piping in ion cooling devices, brewing equipment, cutting oil piping for machine tools, and car wash machines. Connected via simple lever operation, they can transport liquids, gases, powders, etc. Body materials, sizes, and installation shapes are diverse. Quick-connect fittings for hydraulic pressure are mainly used for hydraulic devices and construction machinery. The body material should be metal capable of resisting vibration and impact. Quick-connect fittings for inert gases are used for vacuum piping and compressor pressure tests. Both the sleeve and plug have built-in automatic shut-off valves suitable for vacuum applications, maintaining a vacuum degree of 1 . 3 × 10Pa Pa in the separated state. Quick-connect fittings for cooling water and warm oil are mainly used for general-purpose mold interfaces. They thoroughly simplify mold exchange operations, enhance rust prevention, and come in various types.

multiservis hose fitting installation

Cut the pipe to the required length using a sawing machine or specialized pipe cutting equipment; flame cutting (such as flame cutting) or grinding wheel cutting is strictly prohibited. Remove burrs, metal chips, and dirt from the inside and outside of the pipe end; remove rust preventives and dirt from the pipe joint; also ensure the roundness of the pipe. Slide the nut and ferrule onto the pipe in sequence; the cutting edge (small diameter end) at the front of the ferrule should be at least 3mm away from the pipe mouth. Then insert the pipe into the tapered hole of the joint body until it bottoms out. Slowly tighten the nut while rotating the pipe until it stops moving, then tighten the nut another 2/3 to 4/3 turns. Disassemble to check if the ferrule has cut into the pipe and if the position is correct. The ferrule must not move axially but may rotate slightly. After passing inspection, retighten the nut.

Weidou Intelligent Technology professionally sells German multiservis oil pipe fittings, multiservis hose fittings, multiservis pipe fittings, multiservis pipe component fittings, multiservis rotary joints, multiservis metal fittings, multiservis brass fittings, multiservis stainless steel fittings, multiservis plastic fittings, multiservis hydraulic pipe fittings, multiservis adapter fittings, multiservis threaded pipe fittings, multiservis straight-through fittings, multiservis swivel fittings, multiservis compression fittings, multiservis original German imports. Welcome customers to inquire and order.