Maximator hose fittings Germany Maximator models Maximator price

Maximator hose fittings are connectors used to join metal hoses and pipes. Their model numbers are typically determined by factors such as material, connection method, size, and applicable working pressure. Different models have different characteristics and scopes of application, such as ferrule-type metal hose fittings, flange-type metal hose fittings, and swivel metal hose fittings. Selecting the appropriate metal hose fitting model requires consideration of multiple factors, such as the temperature, pressure, fluid medium, service life, and connection method of the working environment. For applications under special operating conditions involving high temperature, high pressure, and strong corrosion, it is necessary to select high-quality metal hose fitting models that meet the requirements.

Maximator hose fitting installation

During handling and storage of swivel joints, impacts and drops should be avoided to prevent damage to interfaces and internal components. Install with concentric alignment as much as possible to ensure proper operation of the swivel joint. When installing threaded swivel joints, ensure that the thread direction of the inner and outer tubes corresponds to the rotation direction of the drum, and that the thread directions of the inner and outer tubes are consistent. The connection between the swivel joint and the pipeline must use a hose; rigid connections are strictly prohibited. Connect the inlet and outlet of the swivel joint directly to the hose as much as possible to reduce auxiliary weight on the joint and extend service life. For the assembly of the inner tube, pay attention to dimensional fit and auxiliary support for the weight. For internal-rotation swivel joints, a tolerance fit of H8/e7 is recommended for the fit between the inner tube and the joint. Support and anti-rotation measures for the swivel joint should be appropriate; generally, the rod diameter should be 2mm smaller than the anti-rotation hole to avoid affecting the free adjustment and compensation of the swivel joint. Various connection methods for connecting swivel joints to equipment (customers can set up various types of connection methods according to the specific structure of the equipment used.

Maximator hose fitting material classification

Malleable iron tee. The manufacturing materials and specification range of malleable iron tees are the same as those of malleable iron elbows (please refer to the introduction of malleable iron elbows mentioned earlier), mainly used for indoor heating, water supply and drainage, and gas pipelines. Cast iron tee. Like cast iron elbows, cast iron tees are cast from gray cast iron, and the commonly used specifications and pressure ranges are also the same. According to different connection methods, they are divided into socket cast iron tees and flange cast iron tees. Socket cast iron tees are mainly used for water supply and drainage pipelines; water supply pipelines mostly use 90° straight tees; drainage pipelines usually use 45° angled tees to reduce fluid resistance and prevent pipeline blockage. Flange cast iron tees are generally 90° straight tees, mostly used for outdoor cast iron pipes. Steel tee. To manufacture standard tees, molds are usually required, undergoing processes such as cutting, hole punching, and heating, and then machined from medium and low-pressure steel to form tees, which are welded during on-site installation. There are two situations for tees used in steel plate rolled pipes: one is cut from steel plates at the processing plant and formed by rolling and welding; the other is branch connection by hole cutting during on-site installation.

Maximator hose fitting precautions

1. Before cleaning pipes with acidic detergents, residual weld slag, stains, varnish, and other substances must be cleaned off to prevent chemical reactions that could cause unnecessary damage to the pipes and affect future use. 2. To ensure the normal use of hose fittings, they must be protected with special care. During transportation, disassembly, or pickling, avoid damaging threads, pipelines, and sealing surfaces; the best method is to seal them with tape. 3. For all threaded parts of hose fittings, use acid-resistant plastic tape or rubber tape for protection. Alternatively, after direct water washing, apply dry oil to the threaded areas, and once fully dried, immerse in acid solution to remove rust spots. 4. During the pipe cleaning process, pay special attention to the markings on the pipes and protect their integrity as much as possible. Welding tasks must be completed before pickling. In daily use, necessary protection measures for hoses should also be observed.

Weidou Intelligent Technology specializes in selling German Maximator oil pipe fittings, Maximator hose fittings, Maximator pipe fittings, Maximator pipe component fittings, Maximator swivel joints, Maximator metal fittings, Maximator brass fittings, Maximator stainless steel fittings, Maximator plastic fittings, Maximator hydraulic pipe fittings, Maximator adapter fittings, Maximator threaded pipe fittings, Maximator straight-through fittings, Maximator articulated fittings, Maximator ferrule fittings, Maximator original German imports. Welcome customers to inquire and order.