MADER hose fittings Germany MADER model MADER price

MADER hose fittings connect different hydraulic components to form a closed-loop hydraulic system, serving as a connecting accessory. They connect various hydraulic components (pumps, delivery lines, directional valves, shut-off valves, hydraulic motors, hydraulic cylinders, and auxiliary components such as level gauges, thermometers, and pressure gauges) to form a closed-loop hydraulic system, acting as a connecting accessory.

MADER hose fitting classification

Can copper tubes use compression tube fittings? Yes, copper tube connections can use compression tube fittings. Common fittings for copper tube connections include: compression copper tube fittings; quick-connect copper tube fittings; flare-type copper tube fittings; u type copper tube fittings. Compression tube fittings are sealed pipe fittings suitable for non-corrosive or corrosive media such as oil, water, and gas. They offer flexible specifications for use with aluminum-plastic pipes. After connection to the pipeline, they feature reliable connections and good sealing performance, making them widely used in systems such as oil refining, chemical industry, light industry, textiles, national defense, metallurgy, aviation, and shipping. They are also suitable for hydraulic transmission lines in various mechanical engineering and machine tool equipment. Compression tube fittings are a type of hard-seal fitting, forming a seal by using the nut and body to compress the ferrule into the outer wall of the steel pipe. They are generally used on high-pressure pipelines, including steel, copper, and iron pipes.

MADER hose fitting advantages

1, High joint strength: Based on the principle of cold work hardening of steel, the strength of the straight threads rolled on the rebar is significantly improved, making the tensile strength of the straight thread joint higher than that of the base rebar material. 2, Stable performance: The connection process is not affected by worker skill levels, ensuring stable performance. 3, Fast connection speed: Since off-site prefabrication and on-site assembly are used, rebars with pre-threaded ends can be mass-produced and stored at the rebar storage yard. When the schedule is tight, only additional assembly workers are needed at the construction site. 4, Wide application range: There are virtually no limitations in application scope; it is more suitable for scenarios where rebars cannot rotate, such as bent rebars, fixed rebars, and rebar cages. 5, Easy management: Mismatches between sleeves and rebars do not occur, and inspection is convenient. The operation is simple; ordinary workers can become proficient after a few hours of training. 6, Significant economic and social benefits: Shortens construction cycles, improves engineering quality, reduces energy consumption, facilitates environmental protection, reduces equipment investment, and has low additional costs, yielding obvious economic and social benefits. 7, Low labor intensity: Processing one threaded end requires only a single step on a dedicated thread rolling machine.

MADER hose fitting applications

Elbows are commonly used connecting pipe fittings in plumbing and heating installations, used at pipe bends to change the direction of the pipeline. Other names: 90° elbow, right-angle elbow, air elbow, stamped elbow, pressed elbow, machined elbow, welded elbow, etc. Uses: Connect two pipes with the same or different nominal diameters, allowing the pipeline to make 90°, 45°, 180° turns and various other angles. A bend radius less than or equal to 1.5 times the pipe diameter is classified as an elbow, while greater than 1.5 times the pipe diameter is classified as a bend. It is a commonly used connecting pipe fitting in pipeline installation, connecting two pipes with the same or different nominal diameters to allow the pipeline to turn at a specific angle, with a nominal pressure of 1-1.6Mpa.

Weidou Intelligent Technology specializes in selling German MADER oil pipe fittings, MADER hose fittings, MADER pipe fittings, MADER pipe component fittings, MADER rotary joints, MADER metal fittings, MADER brass fittings, MADER stainless steel fittings, MADER plastic fittings, MADER hydraulic pipe fittings, MADER adapter fittings, MADER threaded pipe fittings, MADER straight-through fittings, MADER articulated fittings, MADER compression fittings, MADER original German imports. Welcome inquiries and orders from users.