M&C TechGroup hose fittings Germany M&C TechGroup models M&C TechGroup prices

M&C TechGroup hose fittings are components in hydraulic systems used to connect pipelines or mount pipelines onto hydraulic components. This is a general term for connectors that can be assembled and disassembled in fluid passages. Main types include: welded, bite-type, crimped, and flared.

M&C TechGroup hose fitting precautions

When installing water pipe fittings, thoroughly remove all impurities from inside the pipes. This helps prevent valve core damage, jamming, blockage, and leakage. Also clean the surfaces to ensure no construction material residues remain. For any type of household water pipe fitting product, excessive force is not required when operating the switch; simply turn or toggle gently. Even with traditional household water pipe fittings, do not exert excessive force to tighten them completely. In particular, do not use the handle as a support or handrail. For products equipped with screen filters at the water outlet, disassemble and rinse after a period of use to remove impurities. For products with hoses, ensure the hoses remain naturally extended to prevent breakage.

M&C TechGroup hose fitting installation

Cut the pipe to the required length using a sawing machine or specialized pipe cutting equipment. Flame cutting (such as flame cutting) or grinding wheel cutting is strictly prohibited. Remove burrs from the inner and outer circles of the pipe end, metal chips, and dirt. Remove rust preventive agents and dirt from the pipe joint. Ensure the roundness of the pipe. Slide the nut and bite ring onto the pipe sequentially. The cutting edge (small diameter end) of the bite ring front must be at least 3mm away from the pipe mouth. Then insert the pipe into the tapered hole of the joint body until it bottoms out. Slowly tighten the nut while rotating the pipe until it stops moving, then tighten the nut an additional 2/3 to 4/3 turns. Disassemble to check if the bite ring has cut into the pipe and if the position is correct. The bite ring must not move axially but may rotate slightly. After passing inspection, retighten the nut.

M&C TechGroup hose fitting classification

When disconnected: When the sleeve of the female body moves to the other end, the stainless steel balls automatically roll outward. The male body disconnects due to the combined spring force of the valves in the female and male bodies. The valves in the male and female bodies close separately, instantly blocking fluid flow. When connected: When the male body is inserted into the female body, the sleeve returns to its original position under spring action. The steel balls roll to lock the male body tightly. Simultaneously, the valves in the female and male bodies push against each other to open, allowing fluid flow. The O type O-ring completely prevents fluid leakage. Disconnected: When the sleeve of the female body is pushed to the other end, the steel balls automatically roll outward, causing the male body to be removed. Since neither the male nor female body has valves, fluid flows outward. When connected: When the male body is inserted into the female body, the sleeve is pushed back to its previous position by spring force, locking the steel balls. Fluid flows, and the O type O-ring prevents liquid leakage. Disconnected: When the sleeve of the female body moves to the other end, the stainless steel balls automatically roll outward. The male body is pushed open by the reaction force of the valve spring, and the valves automatically close to block fluid flow. When connected: When the male body is inserted into the side of the female body with the sleeve, the valve opens, allowing fluid flow. The gasket is pushed back to its original position by spring force. The stainless steel balls lock to ensure the male/female connection, and the internal gasket completely prevents fluid leakage.

Weidou Intelligent Technology specializes in selling German M&C TechGroup oil pipe fittings, M&C TechGroup hose fittings, M&C TechGroup pipe fittings, M&C TechGroup pipe component fittings, M&C TechGroup rotary joints, M&C TechGroup metal fittings, M&C TechGroup brass fittings, M&C TechGroup stainless steel fittings, M&C TechGroup plastic fittings, M&C TechGroup hydraulic pipe fittings, M&C TechGroup adapter fittings, M&C TechGroup threaded pipe fittings, M&C TechGroup straight fittings, M&C TechGroup articulated fittings, M&C TechGroup bite-type fittings, M&C TechGroup original German imports. Customers are welcome to inquire and order.