inmess hose connectors, Germany inmess models, inmess prices

inmess hose connectors are connecting devices used to join metal hoses and pipes. Their model numbers are typically determined by factors such as material, connection method, size, and applicable working pressure. Different models have different characteristics and scopes of application, such as bite-type metal hose connectors, flange-type metal hose connectors, and swivel metal hose connectors. Selecting the appropriate metal hose connector model requires consideration of multiple factors, such as the temperature, pressure, fluid medium, service life, and connection method of the working environment. For applications under special conditions such as high temperature, high pressure, and strong corrosion, it is necessary to select high-quality metal hose connector models that meet the requirements.

inmess hose connector structure

A bite-type tube fitting consists of three parts: the fitting body, the ferrule, and the nut. When the ferrule and nut are placed on the steel pipe and inserted into the fitting body, tightening the nut causes the outer front end of the ferrule to seat against the conical surface of the fitting body, while the inner edge uniformly bites into the seamless steel pipe, forming an effective seal. Basic meaning: Bite-type tee terminal fittings, also known as tee terminal fittings, bite-type reducing tees, and bite-type straight tees. Common specifications: 10-10, 6-6, 8-8, G1/2-8, 14-14, 22-22, 8-6, 10-8, 14-10. Common materials: #20, 1Cr18Ni9Ti, 304, 316, 316L. Material knowledge Nominal pressure: 2.5MPa, 16Mpa, 25MPA, 64MPA. Applicable media: oil, water, gas, and other non-corrosive or corrosive media. Piping: Seamless steel pipes with ordinary precision from Ф4 to Ф42. Tapered pipe threads: ZG, R, G, PT, NPT, etc. Applications: Widely used in many industries such as chemical, pharmaceutical, petroleum, scientific experiments, and electrical engineering.

inmess hose connector principle

Quick-disconnect couplings come in two types: one with a check valve and one without. In applications with a check valve, the check valve end is connected to the air source. When disconnected, the check valve closes automatically; when connected, the pin on the movable end opens the check valve. Self-locking is achieved by embedding steel balls into grooves, while the steel balls are locked in place by a "cone-cylinder" sleeve.

inmess hose connector selection

Metal hose assemblies consist of a metal hose body, a stainless steel wire mesh braid, and fittings. They can compensate for certain relative displacements and provide vibration damping and noise reduction effects. However, if selected improperly, they will not only fail to provide vibration isolation and noise reduction but may also cause pipeline leaks or even equipment failure due to damage to the metal hose. The selection of metal hoses mainly involves the correct choice of parameters such as nominal diameter, connection type, working pressure, temperature correction, minimum bending radius, and hose length. Nominal diameter, connection type, and working pressure are directly determined by the piping system requirements and generally do not pose problems. It is worth noting that when selecting the design pressure of the hose (which should be greater than the system working pressure), it should not be too high, because as the pressure-bearing capacity of the hose increases, its bending capability decreases significantly. Temperature correction and minimum bending radius are fixed for the product and provided by the manufacturer. Problems often arise in the selection of the metal hose length. A hose that is too long can cause instability, increase flow resistance, and lead to additional mechanical damage and vibration issues. A hose that is too short may fail to achieve compensation, vibration damping, and noise elimination, and may also cause excessive bending stress, affecting service life.

Weidou Intelligent Technology specializes in selling German inmess oil hose fittings, inmess hose connectors, inmess tube fittings, inmess pipe fittings, inmess swivel joints, inmess metal fittings, inmess brass fittings, inmess stainless steel fittings, inmess plastic fittings, inmess hydraulic hose fittings, inmess adapter fittings, inmess threaded tube fittings, inmess straight fittings, inmess articulated fittings, inmess bite-type fittings, inmess original German imports. Welcome customers to inquire and order.