GM Europe hose connector German GM Europe model GM Europe price

The GM Europe hose connector is translated from the English word bushing. The professional term is reducing connector. It is generally manufactured by cutting and forging hexagonal bars, followed by machining. There are many types of threads used. It connects internal and external threaded fittings for two pipes with different diameters and plays an irreplaceable role in pipe connections.

GM Europe hose connector installation

1. Saw off a seamless steel pipe of suitable length and remove burrs from the port. The pipe end face must be perpendicular to the axis, with an angular tolerance not greater than 0.5°. If the pipe needs to be bent, the straight-line length from the pipe end face to the bending section must not be less than three times the nut length. 2. Slide the nut and ferrule onto the seamless steel pipe. Pay attention to the direction of the nut and ferrule; do not install them backwards. 3. Apply lubricating oil to the threads of the pre-assembled connector body and the ferrule. Insert the pipe into the connector body (the pipe must be inserted fully) and tighten the nut by hand. 4. Tighten the nut until the ferrule grips the pipe. This turning point can be felt by an increase in tightening torque (pressure point). 5. After reaching the pressure point, tighten the compression nut further by 1/2 turn. 6. Remove the pre-assembled connector body and check the embedding of the ferrule cutting edge. The visible raised ring must fill the space at the ferrule end face. The ferrule may rotate slightly but must not move axially. 7. Final installation: apply lubricating oil to the threads of the connector body in the actual installation, and screw on the compression nut until an increase in tightening torque is felt. Then tighten further by 1/2 turn to complete the installation.

GM Europe hose connector classification

Can copper pipes use compression tube fittings? Yes, copper pipe connections can use compression tube fittings. Common fittings for copper pipe connections include: compression copper pipe fittings; quick-connect copper pipe fittings; flare-type copper pipe fittings; u type copper pipe fittings. Compression tube fittings are sealed pipe fittings suitable for non-corrosive or corrosive media such as oil, water, and gas. The specification requirements for aluminum-plastic pipes are relatively flexible. After connection to the pipeline, they feature reliable connection and good sealing performance. Therefore, they are widely adopted in systems such as oil refining, chemical industry, light industry, textiles, national defense, metallurgy, aviation, and shipping. They are also suitable for hydraulic transmission pipelines in various mechanical engineering and machine tool equipment. Compression tube fittings are a type of hard-sealed fitting. They rely on the action of the nut and body to compress the ferrule into the outer wall of the steel pipe, thereby forming a seal. They are generally used on high-pressure pipelines, including steel pipes, copper pipes, and iron pipes.

GM Europe hose connector characteristics

Female straight connector: a terminal fitting commonly used in plumbing installations for directional connections. Male straight connector: a connecting fitting commonly used in plumbing installations. Its external thread is on the outside, opposite to the female elbow. Female threads are classified by angle, including 45° and 90°. Additionally, based on engineering needs, other non-standard angle elbows such as 60° are included. Materials for female elbows include cast iron, stainless steel, alloy steel, malleable cast iron, carbon steel, non-ferrous metals, and plastics. Male elbows are formed by hot pushing or stamping: 1. The hot push elbow forming process uses a specialized elbow pushing machine, core mold, and heating device. The blank placed on the mold moves forward under the drive of the pushing machine, undergoing heating, diameter expansion, and bending during motion. 2. Stamped forming of elbows was the earliest forming process applied to mass production of seamless elbows. Currently, in the production of common specification elbows, it has been replaced by the hot push method or other forming processes. However, for certain elbow specifications, due to small production quantities or wall thicknesses that are too thick or too thin.

Weidou Intelligent Technology professionally sells German GM Europe oil pipe connectors, GM Europe hose connectors, GM Europe pipe connectors, GM Europe pipe fittings, GM Europe rotary joints, GM Europe metal connectors, GM Europe brass connectors, GM Europe stainless steel connectors, GM Europe plastic connectors, GM Europe hydraulic pipe connectors, GM Europe adapter connectors, GM Europe threaded pipe connectors, GM Europe straight connectors, GM Europe articulated connectors, GM Europe compression fittings. GM Europe original imports from Germany. Welcome inquiries and orders from users.