ganter hose fittings Germany ganter model ganter price

ganter hose fittings refer to threaded pipe connectors, which are the most common type of pipe fittings in industrial and daily applications. They are mainly used for small-diameter low-pressure pipelines, for parts that require frequent assembly and disassembly, or as final adjustments for pipelines using threaded fittings. The structural form should preferably adopt a metal-to-metal contact sealing structure. Gasket sealing structures are typically used in general pipelines transporting water, oil, air, etc., and are manufactured from malleable cast iron. The significance of threaded fittings is that they make pipe connections simpler and disassembly/replacement easier, greatly saving on pipe connection costs. They are mainly used for small-diameter low-pressure pipelines, for parts that require frequent assembly and disassembly, or as final adjustments for pipelines using threaded fittings. Features of threaded fittings: high joint strength and good ductility, allowing full utilization of the strength and ductility of the base material of reinforcing steel. Connection is convenient, fast, and simple to operate. During construction connection, no electricity, gas, or open flame is required; there is no oil leakage or pollution. They are corrosion-resistant, leak-proof, anti-detachment, safe, and have a long service life. Application fields: fluid and gas transmission systems in industries related to hydraulics, such as automotive, engineering machinery, lathes, machines, metallurgy, petroleum, mining, construction, chemical industry, shipbuilding, aerospace, military industry, textiles, marine, entertainment, electronics, etc.

ganter hose fitting features

1, since most pipe fittings are used for welding, to improve welding quality, the ends are beveled with a certain angle and edge. This requirement is quite strict, with regulations on edge thickness, angle, and tolerance range. Surface quality and mechanical properties are basically the same as the pipe. To facilitate welding, the steel grade of the pipe fitting is the same as that of the connected pipe. 2, all pipe fittings must undergo surface treatment, where oxide scale on the inner and outer surfaces is removed by shot blasting, followed by application of anti-corrosion paint. This is required for export purposes, and domestically it is also done to prevent rust and oxidation during transportation. 3, packaging requirements: for small pipe fittings, such as for export, wooden crates are required, approximately 1 cubic meters in volume. It is specified that the number of elbows in such crates should not exceed one ton. The standard allows nesting (i.e., smaller fittings inside larger ones), but the total weight generally must not exceed 1 tons. For large items y, individual packaging is required; for example, 24″ fittings must be packaged individually. Additionally, packaging marks must indicate dimensions, steel grade, batch number, manufacturer trademark, etc.

ganter hose fitting selection

How to select high-pressure pipe fittings: 1, hose size: the inner diameter of the hose must be appropriate. If the hose is fixed with clamps or passes through spacers such as steel plates, pay attention to the outer diameter of the hose. 2, working pressure: according to the safety factor for hydraulic hoses specified in relevant international standards, the recommended working pressure is typically one-quarter of the minimum burst pressure of the hose. 3, impulse pressure and fatigue life: hose selection is determined based on the maximum pressure value of the hydraulic system design. Impulse pressure does not significantly affect the fatigue life of the hose. For hydraulic systems with particularly frequent impulse pressures, it is recommended to select hose products specially resistant to pulsating shock. 4, temperature range: users should use hoses within the temperature range permitted by the hose quality specifications, and if operating continuously, regular cooling is recommended. 5, chemical compatibility: if special hydraulic media are used, users must ensure that the inner and outer layers of the selected hose assembly, as well as the fittings and O type O-rings, are compatible with the medium.

ganter hose fitting differences

Difference between external water pipe fittings and union joints: unions are used to connect pipes. Quick-connect fittings have one end that can connect to a pipe and the other end that can connect to a hose for easy discharge; they can also be covered with a cap when not in use. When installing water pipe fittings, it is necessary to first understand the components of the water pipe fitting. Components include: elbows, reducing elbows, internal/external thread elbows, tees, reducing tees, internal thread fittings, reducing internal thread fittings, external thread fittings, internal/external thread fittings (bushings), caps, plugs, union joints, etc. If PPR pipes are selected, they can be welded using a hot melt machine; if iron pipes are used, threading must be done first using a threading machine, followed by wrapping with hemp or PTFE tape.

Weidou Intelligent Technology specializes in selling German ganter oil pipe fittings, ganter hose fittings, ganter pipe fittings, ganter pipe component fittings, ganter rotary joints, ganter metal fittings, ganter brass fittings, ganter stainless steel fittings, ganter plastic fittings, ganter hydraulic pipe fittings, ganter adapter fittings, ganter threaded pipe fittings, ganter straight-through fittings, ganter swivel fittings, ganter compression fittings, ganter original imports from Germany. Welcome customers to inquire and order.