FASTER hose fittings, German FASTER models, FASTER prices

FASTER hose fittings connect various hydraulic components (pumps, delivery lines, directional control valves, shut-off valves, hydraulic motors, hydraulic cylinders, and auxiliary components such as level gauges, thermometers, and pressure gauges) to form a closed-loop hydraulic system. Hydraulic hose fittings serve as connecting accessories within this system. They are detachable connectors between hydraulic hoses and other hoses or between hoses and hydraulic components. They should meet requirements for easy assembly and disassembly, reliable connection, reliable sealing, compact dimensions, high flow capacity, low pressure loss, and good manufacturability. Hydraulic hose fittings are widely used in all areas of daily life and are primarily employed in hydraulic piping systems across industries such as energy, petrochemicals, electric power, shipbuilding, automotive, rail transit, mining, metallurgy, steel mills, offshore engineering, and construction machinery. Construction machinery is a major application area for hydraulic hose fittings.

FASTER hose fitting distinctions

Hydraulic hose fittings, fitting bodies, and elbows are common pipe connectors in hydraulic systems, all serving to connect hydraulic piping. The differences are as follows: A hydraulic hose fitting is a device that connects two pipes together. It typically consists of two parts: an internal thread and an external thread, which securely join two pipes and allow for easy disassembly and replacement. Fitting body: A fitting body is also a pipe connector, used to join multiple pipes to form a complex piping system. Fitting bodies usually include connection ports of various diameters and models to accommodate different types and sizes of pipes. Elbow: An elbow is a pipe fitting typically used to change the direction of a pipe. It allows the pipe to turn from one direction to another, enabling the piping system to better adapt to different layouts and spatial constraints. Therefore, while both elbows and fitting bodies fall under the category of pipe fittings, their functions and designs differ. An elbow is a connector used to change pipe direction, whereas a fitting body is a complex connector used to join multiple pipes. A hydraulic hose fitting is a device that connects two pipes together.

FASTER hose fitting installation

Cut the pipe to the required length using a sawing machine or a dedicated pipe-cutting tool. Do not use thermal cutting (such as flame cutting) or grinding wheel cutting. Remove burrs from the inner and outer circles of the pipe end, metal chips, and dirt. Remove rust preventive agents and dirt from the pipe fitting. Ensure the roundness of the pipe. Slide the nut and ferrule onto the pipe in sequence. The cutting edge at the front end of the ferrule (small diameter end) must be at least 3mm away from the pipe end. Insert the pipe into the tapered hole of the fitting body until it bottoms out. Slowly tighten the nut while rotating the pipe until it no longer moves, then tighten the nut an additional 2/3 to 4/3 turns. Disassemble to check whether the ferrule has cut into the pipe and if its position is correct. The ferrule must not move axially but may rotate slightly. After passing inspection, retighten the nut.

FASTER hose fitting classification

For combined air and liquid use, primarily for piping in ion cooling devices, brewing equipment, cutting oil piping for machine tools, and car wash machines. Connection is achieved through simple lever operation, allowing the transfer of liquids, gases, powders, etc. Body materials, sizes, and installation shapes are diverse. Precautions for use: Do not use with fluids other than the specified applicable fluids. Do not exceed the maximum operating pressure during use. Do not use outside the specified temperature range to prevent wear or leakage of sealing materials. Do not disassemble; use sealant for threaded connections on external threads. During installation, do not exceed the maximum torque to prevent damage. Do not use for purposes other than quick-connect fittings. Do not connect with quick-connect fluid fittings from other manufacturers. Avoid artificial impact, bending, or stretching to prevent damage. Do not use in environments containing metal powder or sand/dust to prevent malfunction or leakage. Accumulation of debris can cause malfunction or leakage. A brake valve must be installed before the quick-connect fitting. Do not use as a hinged joint. Use in machines with vibration or shock will reduce durability. For steel and iron quick-connect fittings, do not use water or glycol-based media, as the zinc coating on the surface will dissolve. The working fluid must be clean and filtered. "O" O-rings must remain lubricated with oil during use. For hydraulic applications, the body material should be metal resistant to vibration and shock. Sizes and installation shapes are diverse. Precautions for use: Do not use with fluids other than the specified applicable fluids. Do not exceed the maximum operating pressure limit of the quick-connect fitting during use. Do not use outside the specified temperature range to prevent wear or leakage of sealing materials. Do not disassemble when hydraulic pressure is present; use thread-specific sealant for external threaded connections. During installation, do not exceed the maximum torque to prevent damage. Do not use for purposes other than quick-connect fittings. Do not connect with quick-connect fluid fittings from other manufacturers. Avoid artificial impact, bending, or stretching to prevent damage. Do not use in environments containing metal powder or sand/dust to prevent malfunction or leakage. Accumulation of debris can cause malfunction or leakage. A brake valve must be installed before the quick-connect fitting. Do not use as a hinged joint. Use in machines with vibration or shock will reduce durability. Do not use water or glycol-based media, as these substances will dissolve the zinc coating on the surface. The working fluid must be clean and filtered. "O" O-rings must remain lubricated with oil during use. The fluid flow velocity during use should be kept below 8m/s. Refer to the end of these precautions to confirm suitable sealing and body materials for the applicable fluid.

Weidou Intelligent Technology specializes in selling German FASTER hydraulic hose fittings, FASTER hose fittings, FASTER pipe fittings, FASTER component fittings, FASTER rotary joints, FASTER metal fittings, FASTER brass fittings, FASTER stainless steel fittings, FASTER plastic fittings, FASTER hydraulic hose fittings, FASTER adapter fittings, FASTER threaded pipe fittings, FASTER straight-through fittings, FASTER swivel fittings, FASTER ferrule-type fittings, all original imports from Germany. Customers are welcome to inquire and place orders.