elbe hose connector Germany elbe model elbe price

elbe hose connectors are end-fittings, used as straight connectors to attach metal hoses to enclosures; they are detachable connection points between components and pipelines. They play an indispensable role in pipe fittings and are one of the two main components of hydraulic piping. Hose connectors are a type of high-quality flexible piping in modern industrial pipeline systems. They mainly consist of bellows, a wire braid, and connectors. The inner tube is a thin-walled stainless steel bellows with a spiral or annular shape, and the outer wire braid of the bellows is woven from stainless steel wire or steel strip according to specific parameters. The connectors or flanges at both ends of the hose match the connectors or flanges of the customer's pipeline. The bellows of the hose are formed by high-precision plastic working of extremely thin-walled seamless or welded stainless steel pipes. Due to the elastic characteristics of the bellows profile, the hose has good flexibility and fatigue resistance, making it easy to absorb cyclic loads from various motion deformations, especially the ability to compensate for large displacements in pipeline systems. Media visualization (media visible), process automation.

elbe hose connector functions

It connects the wire braid to the entire bellows, and the connector is also the component that connects the metal hose to other pipeline accessories and equipment. It ensures the medium works properly in the pipeline system. The material of the connector is usually the same as that of the bellows and the wire braid, and most are stainless steel. When transporting non-corrosive media, some metal hoses with larger diameters can be made of carbon steel. Metal hose connectors for corrosive media (if designed) take appropriate measures to avoid contact with the medium, and can also be made of carbon steel. The structure of the connector is roughly divided into three categories: screw type, flange type, and quick-connect type: under high working pressure conditions, the connectors for metal hoses (explosion-proof hoses) with a thread diameter less than 50 mm are mostly threaded. After tightening the threads, the inner and outer conical surfaces of the two connectors fit tightly to achieve sealing. The cone angle is usually 60 degrees, while 74 degrees is also useful. This structure has good sealing performance, but concentricity of the two mating parts must be ensured during installation. To solve the problems of repeated disassembly, assembly, and concentricity that often occur in actual projects, the connector can also be designed to match a conical surface with a spherical head.

elbe hose connector classification

For combined air and liquid use, mainly used for piping in ion cooling devices, brewing equipment, cutting oil piping for machine tools, and car washing machines. Connected via simple lever operation, it can transport liquids, gases, powders, etc. The body material, size, and installation shapes are diverse. Precautions for use: Do not use for fluids other than the applicable fluid. Do not exceed the maximum operating pressure during use. Do not use outside the operating temperature range to prevent wear or leakage of sealing materials. Do not disassemble; use sealant for tapered pipe threads on external threads. During installation, do not exceed the maximum torque to prevent damage. Do not use for purposes other than quick connectors. Do not connect with quick fluid connectors from other companies. Do not artificially hit, bend, or stretch to prevent damage. Do not use in places mixed with metal powder or sand/dust to prevent malfunction or leakage. Attachment of debris will cause malfunction or leakage. A brake valve must be installed before the quick connector. Do not use as a hinged connector. Use in machines with vibration or impact will reduce durability. For steel and iron quick connectors, do not use water or glycol-based media. The surface zinc coating will dissolve. The fluid used must be clean fluid filtered through a filter. "O" O-rings must always remain in an oiled state during use. For hydraulic applications, the body material should be metal resistant to vibration and impact. Sizes and installation shapes are diverse. Precautions for use: Do not use for fluids other than the applicable fluid. Do not exceed the maximum operating pressure limit of the quick-change connector during use. Do not use outside the operating temperature range to prevent wear or leakage of sealing materials. Do not disassemble when hydraulic pressure is passing through; use thread-specific sealant for external tapered pipe threads. During installation, do not exceed the maximum torque to prevent damage. Do not use for purposes other than quick connectors. Do not connect with quick fluid connectors from other companies. Do not artificially hit, bend, or stretch to prevent damage. Do not use in places mixed with metal powder or sand/dust to prevent malfunction or leakage. Attachment of debris will cause malfunction or leakage. A brake valve must be installed before the quick connector. Do not use as a hinged connector. Use in machines with vibration or impact will reduce durability. Do not use water or glycol-based media. Such substances will cause the surface zinc coating to dissolve. The fluid used must be clean fluid filtered through a filter. "O" O-rings must always remain in an oiled state during use. The flow velocity of the fluid during use should be kept below 8m/s. Refer to the end part of these precautions to confirm the sealing material and body material suitable for the fluid used.

elbe hose connector classification

For combined air and liquid use, mainly used for piping in ion cooling devices, brewing equipment, cutting oil piping for machine tools, and car washing machines. Connected via simple lever operation, it can transport liquids, gases, powders, etc. The body material, size, and installation shapes are diverse. Precautions for use: Do not use for fluids other than the applicable fluid. Do not exceed the maximum operating pressure during use. Do not use outside the operating temperature range to prevent wear or leakage of sealing materials. Do not disassemble; use sealant for tapered pipe threads on external threads. During installation, do not exceed the maximum torque to prevent damage. Do not use for purposes other than quick connectors. Do not connect with quick fluid connectors from other companies. Do not artificially hit, bend, or stretch to prevent damage. Do not use in places mixed with metal powder or sand/dust to prevent malfunction or leakage. Attachment of debris will cause malfunction or leakage. A brake valve must be installed before the quick connector. Do not use as a hinged connector. Use in machines with vibration or impact will reduce durability. For steel and iron quick connectors, do not use water or glycol-based media. The surface zinc coating will dissolve. The fluid used must be clean fluid filtered through a filter. "O" O-rings must always remain in an oiled state during use. For hydraulic applications, the body material should be metal resistant to vibration and impact. Sizes and installation shapes are diverse. Precautions for use: Do not use for fluids other than the applicable fluid. Do not exceed the maximum operating pressure limit of the quick-change connector during use. Do not use outside the operating temperature range to prevent wear or leakage of sealing materials. Do not disassemble when hydraulic pressure is passing through; use thread-specific sealant for external tapered pipe threads. During installation, do not exceed the maximum torque to prevent damage. Do not use for purposes other than quick connectors. Do not connect with quick fluid connectors from other companies. Do not artificially hit, bend, or stretch to prevent damage. Do not use in places mixed with metal powder or sand/dust to prevent malfunction or leakage. Attachment of debris will cause malfunction or leakage. A brake valve must be installed before the quick connector. Do not use as a hinged connector. Use in machines with vibration or impact will reduce durability. Do not use water or glycol-based media. Such substances will cause the surface zinc coating to dissolve. The fluid used must be clean fluid filtered through a filter. "O" O-rings must always remain in an oiled state during use. The flow velocity of the fluid during use should be kept below 8m/s. Refer to the end part of these precautions to confirm the sealing material and body material suitable for the fluid used.

Weidou Intelligent Technology professionally sells German elbe oil pipe connectors, elbe hose connectors, elbe pipe connectors, elbe pipe fitting connectors, elbe rotary joints, elbe metal connectors, elbe brass connectors, elbe stainless steel connectors, elbe plastic connectors, elbe hydraulic pipe connectors, elbe adapter connectors, elbe threaded pipe connectors, elbe straight connectors, elbe hinged connectors, elbe compression fittings, elbe original German imports. Welcome customers to inquire and order.