DURAPIPE hose connectors Germany DURAPIPE models DURAPIPE prices

DURAPIPE hose connectors are components used to connect hoses to other hoses or components. Hoses include stainless steel hoses, metal hoses, corrugated hoses, rubber hoses, plastic hoses, and other types; hose connectors vary by hose type. Materials for metal hose connectors mainly include stainless steel, nickel-plated copper, and zinc alloy. Shapes mainly include external thread end connectors, external thread 45-degree elbows, external thread 90-degree elbows, internal thread connectors, self-locking connectors, and compression fittings, among others. Select metal hose connectors based on installation conditions and operating environment.

DURAPIPE hose connector classification

Suitable for both gas and liquid applications. Mainly used for piping in ion cooling units, brewing equipment, cutting oil piping for machine tools, and car wash machines. Connected via simple lever operation, capable of transporting liquids, gases, powders, etc. Available in a wide variety of body materials, sizes, and installation shapes. Precautions for use: Do not use with fluids other than the specified applicable fluids. Do not exceed the maximum operating pressure during use. Do not use outside the specified temperature range to prevent wear or leakage of sealing materials. Do not disassemble; use sealant for pipe threads on external threads. During installation, do not exceed the maximum torque to prevent damage. Do not use for purposes other than quick-connect couplings. Do not connect to quick-connect fluid couplings from other manufacturers. Avoid artificial impact, bending, or stretching to prevent damage. Do not use in environments contaminated with metal powder, sand, or dust to prevent malfunction or leakage. Accumulation of debris can cause malfunction or leakage. A shut-off valve must be installed before the quick-connect coupling. Do not use as a hinged joint. Use in machinery with vibration or shock will reduce durability. For steel and iron quick-connect couplings, do not use water or glycol-based media, as the zinc coating will dissolve. The working fluid must be clean and filtered. "O" O-rings must remain lubricated during use. For hydraulic applications, the body material should be metal resistant to vibration and shock. Available in a wide variety of sizes and installation shapes. Precautions for use: Do not use with fluids other than the specified applicable fluids. Do not exceed the maximum operating pressure limit of the quick-connect coupling during use. Do not use outside the specified temperature range to prevent wear or leakage of sealing materials. Do not disassemble when hydraulic pressure is present; use thread-specific sealant for external pipe threads. During installation, do not exceed the maximum torque to prevent damage. Do not use for purposes other than quick-connect couplings. Do not connect to quick-connect fluid couplings from other manufacturers. Avoid artificial impact, bending, or stretching to prevent damage. Do not use in environments contaminated with metal powder, sand, or dust to prevent malfunction or leakage. Accumulation of debris can cause malfunction or leakage. A shut-off valve must be installed before the quick-connect coupling. Do not use as a hinged joint. Use in machinery with vibration or shock will reduce durability. Do not use water or glycol-based media, as these substances will dissolve the zinc coating. The working fluid must be clean and filtered. "O" O-rings must remain lubricated during use. Fluid flow velocity during use should be kept below 8m/s. Refer to the end of these precautions to confirm suitable sealing and body materials for the working fluid.

DURAPIPE hose connector types

1. Tees are generally classified by pipe diameter into equal-diameter tees and reducing tees. 2. Classified by branch direction, there are straight tees and lateral tees. 3. Classified by material, there are carbon steel, alloy steel, stainless steel, copper, and pvc tees. 4. Classified by connection method, there are standard tees, threaded tees, compression fitting tees, and socket-weld tees. 5. The designation method for tees is as follows: For an equal-diameter tee, such as "T6", it indicates an equal-diameter tee with an outer diameter of 6 inches. 6. For a reducing tee, for example, "T4×4×3.5" indicates a reducing tee with a nominal diameter of four inches and a reducing diameter of 3.5 inches. The pressure rating is the same as that of elbows, and the specification range is also the same.

DURAPIPE hose connector material classification

Malleable cast iron tees. The manufacturing materials and specification ranges for malleable cast iron tees are the same as those for malleable cast iron elbows (please refer to the previous introduction to malleable cast iron elbows). They are mainly used for indoor heating, water supply and drainage, and gas pipelines. Cast iron tees. Like cast iron elbows, cast iron tees are cast from gray cast iron, and the common specifications and pressure ranges are the same. Based on different connection methods, they are divided into socket cast iron tees and flanged cast iron tees. Socket cast iron tees are mainly used for water supply and drainage pipelines. Water supply pipelines mostly use 90 ° straight tees; drainage pipelines typically use 45 ° lateral tees to reduce fluid resistance and prevent pipe blockage. Flanged cast iron tees are generally 90 ° straight tees and are mostly used for outdoor cast iron pipes. Steel tees. Standard tees are usually made using molds, undergoing processes such as cutting, hole punching, and heating, and then machined from medium- and low-pressure steel. Welding is used for on-site installation. There are two cases for tees used with steel plate rolled pipes: one is cut from steel plates at the processing plant and formed by rolling and welding; the other involves cutting holes and connecting pipes during on-site installation.

Weidou Intelligent Technology specializes in selling German DURAPIPE oil hose connectors, DURAPIPE hose connectors, DURAPIPE pipe connectors, DURAPIPE pipe fitting connectors, DURAPIPE rotary joints, DURAPIPE metal connectors, DURAPIPE brass connectors, DURAPIPE stainless steel connectors, DURAPIPE plastic connectors, DURAPIPE hydraulic hose connectors, DURAPIPE adapter connectors, DURAPIPE threaded pipe connectors, DURAPIPE straight connectors, DURAPIPE swivel connectors, DURAPIPE compression fittings, DURAPIPE original German imports. Welcome customers to inquire and order.