BILSTEIN hose connector Germany BILSTEIN model BILSTEIN price

BILSTEIN hose connectors are components used to connect water pipes. Connectors can be classified by usage method into: external thread end-connecting water pipe connectors, compression-type water pipe connectors, and self-locking water pipe connectors. External thread end-connecting water pipe connectors are die-cast from zinc alloy, with surfaces galvanized, sandblasted, or chrome-plated; they feature a compact structure, no pores, and high strength. Compression-type water pipe connectors can connect unthreaded steel pipes to hoses, eliminating the threading process; simply screw in the fastener. They feature a compact structure and high strength. Water pipe connectors can connect unthreaded steel pipes or unthreaded equipment cable outlets to hoses, eliminating the threading process; they are die-cast from zinc alloy, with surfaces galvanized, sandblasted, or chrome-plated; they feature a compact structure and high strength. Widely used in high-end buildings, hotels, hospitals, office towers, stadiums, museums, government agencies, villas, and residential complexes.

BILSTEIN hose connector crimping

How to crimp high-pressure pipe connectors: first, the international metric internal thread flat-face connector; second, the international metric compression-type connector; third, the international metric internal thread 74 degree internal conical face connector; fourth, the international metric internal thread spherical connector; fifth, the mining hydraulic support connector. There are some points to note when using high-pressure oil pipe connectors: 1. When handling high-pressure oil pipes, care must be taken to avoid surface friction to prevent damage. Although the rubber hose is intended for use, we must not allow leaks to appear on the surface of the high-pressure oil pipe. 2. Do not bend the high-pressure oil pipe, as this will cause internal damage to the high-pressure oil pipe, adding unnecessary trouble for future use. 3. Do not put the high-pressure oil pipe into immediate use; it is recommended to flush it with water or similar fluid first. Some high-pressure oil pipes are acid and alkali resistant; we cannot use fluids that conflict with the current medium for testing. 4. When installing high-pressure oil pipe connectors, be sure to tighten them to prevent fluid leakage.

BILSTEIN hose connector installation

Cut the pipe to the required length using a sawing machine or specialized pipe cutting equipment; solvent cutting (such as flame cutting) or grinding wheel cutting is strictly prohibited. Remove burrs from the inner and outer circles of the pipe end, metal chips, and dirt; remove rust preventive agents and dirt from the pipe connector; also ensure the roundness of the pipe. Slide the nut and ferrule onto the pipe in sequence. The cutting edge of the front end of the ferrule (small diameter end) should be at least 3mm from the pipe mouth. Then insert the pipe into the conical hole of the connector body until it bottoms out. Slowly tighten the nut while rotating the pipe until it stops moving, then tighten the nut another 2/3 to 4/3 turns. Disassemble and check whether the ferrule has cut into the pipe and if the position is correct. The ferrule must not have axial movement but may rotate slightly. After passing inspection, retighten the nut.

BILSTEIN hose connector selection

How to select high-pressure hose fittings, 1, hose dimensions: The inner diameter of the hose should be appropriate. If the hose is fixed with clamps or passes through spacers such as steel plates, pay attention to the outer diameter of the hose. 2, working pressure: According to the safety factor for hydraulic hoses specified in relevant international standards, the recommended working pressure is generally one quarter of the minimum burst pressure of the hose. 3, impulse pressure and fatigue life: Hose selection is determined based on the maximum pressure value of the hydraulic system design. Impulse pressure does not significantly affect the fatigue life of the hose; for hydraulic systems with particularly frequent impulse pressures, it is recommended to choose hose products that are especially resistant to pulsating impulses. 4, temperature range: Users should operate the hose within the temperature range allowed by the hose quality specifications, and if operating continuously, it is recommended to cool down frequently. 5, chemical compatibility: If using special hydraulic media, users should ensure that the selected hose assembly, including the inner and outer layers of the hose, fittings, and O type seals, are compatible with the medium.

Weidou Intelligent Technology specializes in selling German BILSTEIN oil pipe connectors, BILSTEIN hose connectors, BILSTEIN pipe connectors, BILSTEIN pipe fitting connectors, BILSTEIN rotary joints, BILSTEIN metal connectors, BILSTEIN brass connectors, BILSTEIN stainless steel connectors, BILSTEIN plastic connectors, BILSTEIN hydraulic pipe connectors, BILSTEIN adapter connectors, BILSTEIN threaded pipe connectors, BILSTEIN straight-through connectors, BILSTEIN articulated connectors, BILSTEIN compression-type connectors, BILSTEIN original imports from Germany. We welcome inquiries and orders from customers.