Aquametro hose connector Germany Aquametro model Aquametro price

Aquametro hose connectors are fittings that enable connection or disconnection of pipelines without tools. Exchange function: accessories for pneumatic and hydraulic tools, cylinders, hydraulic cylinders, and machinery related to metal molds. Maintenance function: cooling devices for computers, maintenance of oil cylinders in die-casting machines. Test function: testing for vacuum, pressure resistance, leakage, operation, etc. Conveying function: transport and handling of solids such as bolts and nuts, as well as electrical conductivity. Filling function: inert gases, nitrogen, PG, carbonic acid. Time and labor saving: when disconnecting and connecting oil lines via quick connectors, the operation is simple, saving time and manpower. Oil saving: when the oil line is disconnected, the check valve on the quick connector can close the oil line, preventing oil from flowing out and avoiding loss of oil and oil pressure. Environmental protection: when quick connectors are disconnected and connected, oil does not spill, protecting the environment. Equipment modularization for convenient transport: large equipment or hydraulic tools that need to be portable can be disassembled using quick connectors for transport, and then assembled for use at the destination.

Aquametro hose connector installation

Installation is the most critical step, directly affecting sealing reliability. Specialized pre-assembly tools are generally required. Connectors with small pipe diameters can be pre-assembled on a bench vise. The specific method involves using a connector body as the main body, pressing the nut and ferrule onto the pipe. Main types include ferrule-type straight pipe connectors, ferrule-type end straight pipe connectors, and ferrule-type tee pipe connectors. The depth of the tapered hole in these connector bodies often varies, which can result in loose spherical contact between the ferrule and the inner tapered surface of the connector body when a pipe pre-assembled for a straight connector is used for a tee connector, leading to leakage; this issue is often overlooked. The correct approach is to pre-assemble the corresponding connection end with the same type of connector body used for the other end of the pipe, maximizing the avoidance of leakage. Maintain coaxiality between the pipe and the connector body as much as possible; excessive pipe deviation will also cause sealing failure. Pre-assembly force should not be too high. The inner cutting edge of the ferrule should just embed into the outer wall of the pipe, and the ferrule should not show significant deformation. Severe deformation of the ferrule during pre-assembly will compromise its sealing function.

Aquametro hose connector specifications and applications

Connector specifications are classified based on the interface, mainly consisting of two types: one-half and three-quarters, which correspond to 4-part pipes and 6-part pipes. They are suitable for faucet connectors or water pipe connections, offering a wide range of applications. Including spray guns, selecting the correct specification allows for quick connection. Whether connecting valves, water valves, or spray gun connectors, hearing a click indicates proper positioning; then gently tighten the nut. A water pipe connector is a component capable of connecting water pipes, categorized by usage into three types: self-locking, ferrule-type, and external thread. Materials vary, such as galvanized or chrome-plated surfaces, basically made from plated alloy materials, some with a matte finish. Its specifications are more varied than those of quick connectors, including one-quarter, three-quarters, three-eighths, one-half, etc., meaning it accommodates slightly more water pipe sizes. Select quick connectors with similar specifications to the water pipe; if it is a 4-part pipe, the corresponding quick connector must also be 4-part specification, reaching 20 millimeters. First install it on both ends of the connecting water pipe, then gently hold and rotate to tighten the nut. When a clicking sound is heard, it indicates a complete fit; after tightening, it provides a sealing effect. Finally, turn on the faucet to check for leaks at the interface; if none are present, the installation is correct.

Aquametro hose connector applications

A bushing is a component widely used in domestic large-scale power plant supporting projects, seawater, steam, cold water, hot water, oxygen, drinking water, refrigeration, oil, gas, medical gas, sewage treatment projects, municipal engineering, chemical industry, oil refining, metallurgy, fertilizer, papermaking, pharmaceuticals, and other industries. Bushings are used when water pipes require a change in diameter. For example, changing a DN15 water pipe to a DN20 water pipe. The DN15 water pipe is an external thread pipe, connecting to the internal thread side of the bushing. The DN20 water pipe is an internal thread pipe, connecting to the external thread side of the bushing. If the DN20 water pipe is an external thread pipe, an internal thread reducer can be connected between the DN20 external thread pipe and the bushing. Threaded connections allow convenient connection with any water fixtures and valve meters. Industry and daily life frequently use them to connect internal and external pipe threads (teeth) to change pipe diameter size.

Weidou Intelligent Technology professionally sells German Aquametro oil pipe connectors, Aquametro hose connectors, Aquametro pipe connectors, Aquametro pipe fitting connectors, Aquametro rotary joints, Aquametro metal connectors, Aquametro brass connectors, Aquametro stainless steel connectors, Aquametro plastic connectors, Aquametro hydraulic pipe connectors, Aquametro adapter connectors, Aquametro threaded pipe connectors, Aquametro straight connectors, Aquametro articulated connectors, Aquametro ferrule connectors, Aquametro original German imports. Welcome customers to inquire and order.