Phoenix Mecano motor, German Phoenix Mecano model, Phoenix Mecano price

Phoenix Mecano motors are a new generation of gear reduction motors, featuring compact size, low noise, maintenance-free operation, and an attractive appearance. The speed ranges from 0.83r/min to 300r/min. This series of low-speed motors is a new high-tech product that integrates electromagnetic drive and reduction mechanism within the motor housing. The low speed and high torque directly meet customer requirements without the need for additional reduction devices. The motor uses Class B and Class F insulation, with protection ratings of IP44 and IP55, and voltages of 220V and 380V.

Phoenix Mecano motor classification

Motor classification: 1. Hydraulic motor: Conventionally refers to an energy conversion device that outputs rotary motion, converting hydraulic energy provided by a hydraulic pump into mechanical energy. 2. High-speed motor: Gear motors have advantages such as compact size, light weight, simple structure, good manufacturability, insensitivity to oil contamination, shock resistance, and low inertia. Disadvantages include large torque ripple, lower efficiency, and low starting torque (only 60% to 70% of rated torque), as well as poor low-speed stability. 3. Vane motor: A hydraulic motor in which vanes in the rotor slots contact the housing (stator ring), causing the rotor to rotate under the action of incoming fluid. Compared with other motor types, vane motors offer compact structure, smaller outline dimensions, low noise, and long service life. Their inertia is lower than that of piston motors, but their contamination resistance is poorer than that of gear motors, and the speed cannot be too high, generally operating below 200r/min. Due to significant leakage, vane motors are unstable under load changes or at low speeds. 4. Radial piston motor: Features good reverse characteristics, ensuring absolutely quiet motor operation, suitable for servo systems. Can operate bidirectionally as a motor or pump. 5. Axial piston motor: A shaft-ported cycloidal hydraulic motor with rolling bearing support, adopting an integrated design of the output shaft and porting mechanism, inserted-tooth stator and rotor, rolling bearing support at both ends, and special imported rotary seals, allowing the motor to operate under higher back pressure. 6. Low-speed hydraulic motor: Simple structure, reliable operation, wide variety of specifications, and low price. Disadvantages include larger volume and weight, and significant torque ripple. 7. Cycloidal motor: A small, low-speed, high-torque hydraulic motor with internal meshing cycloidal gears. It has a simple structure, good low-speed performance, and strong short-term overload capacity. Inside the cycloidal motor, there is a stator and a moving vane; the stator, vane, and drive shaft divide the motor into two chambers, each with an oil port. When one port admits oil, the other discharges it, and the incoming oil pushes the vane to oscillate. 8. Piston-type pneumatic motor: Composed of connecting rods, crankshaft, pistons, cylinders, body, and air distribution valve. Compressed air supplies each cylinder sequentially through the air distribution valve, expanding to perform work and driving the crankshaft to rotate via the connecting rods. Its power mainly comes from gas expansion work.

Phoenix Mecano motor applications

The most widely used motors are AC asynchronous motors (also known as induction motors). They are easy to use, reliable, inexpensive, and robust in structure, but have a low power factor and difficult speed control. Synchronous motors are commonly used for high-capacity, low-speed prime movers. Synchronous motors not only have a high power factor, but their speed is independent of the load size and is determined solely by the grid frequency. They operate relatively stably. DC motors are often used in applications requiring wide-range speed control. However, they have commutators, complex structures, high prices, difficult maintenance, and are not suitable for harsh environments. After the 20th century 70s, with the development of power electronics technology, AC motor speed control technology gradually matured, equipment prices continued to drop, and began to be applied. The maximum output mechanical power that a motor can handle without causing overheating under specified operating modes (continuous, short-time, intermittent periodic) is called its rated power; attention should be paid to the specifications on the nameplate during use. During operation, care must be taken to match the load characteristics with the motor characteristics to avoid overspeed or stalling. Motors can provide a wide range of power, from milliwatts to tens of thousands of kilowatts. The use and control of motors are very convenient, with capabilities such as self-starting, acceleration, braking, reversing, and holding, meeting various operational requirements; motors have high efficiency, produce no smoke, dust, or odor, do not pollute the environment, and generate low noise. Due to these advantages, they are widely used in industrial and agricultural production, transportation, national defense, commerce, household appliances, medical electrical equipment, and other fields. Generally, when adjusting the speed of a motor, its output power changes with the speed.

Phoenix Mecano motor mechanical characteristics

Due to their low starting current and high starting torque, these motors are often used in locations where starting is difficult, or in mechanisms requiring high starting torque with instantaneous intermittent operation, such as for operating control switches. This allows for high starting torque and the selection of much smaller physical dimensions compared to other motor types. Additionally, universal motors (AC/DC) have a wide speed control range and can achieve high speeds. Generally, the speed of an asynchronous motor depends on the number of poles and the supply frequency; for a 50Hz supply, the maximum speed of a two-pole motor is below 3ooor/min. Of course, variable frequency motors can increase speed but require a dedicated power supply. Speed can be increased by reducing the number of armature conductors; for example, universal motors for power tools reach speeds of 9900 to 145oor/min, and high-speed centrifuges for medical devices can reach up to 20000r/min. Therefore, this type of motor can be selected for high-speed applications, such as dental drills driven by universal motors. The mechanical characteristics of universal motors are relatively soft; as torque increases, speed drops rapidly, limiting the increase in output power and making it difficult to overload due to increased load. This makes them suitable for constant power control applications or places where load torque frequently changes significantly. In tape tension structures of tape recorders and bicycle transmission mechanisms, these motors can replace permanent magnet DC motors. When the load is very small, the speed of a universal motor becomes very high, so it cannot operate at full voltage with no load. Generally, when operating at full voltage, the minimum load should not be less than 25% to 30% of the rated value. When the load is very small, the speed of a universal motor becomes very high, so it cannot operate at full voltage with no load. Generally, when operating at full voltage, the minimum load should not be less than 25% to 30% of the rated value.

Weidou Intelligent Technology specializes in selling German Phoenix Mecano motors, Phoenix Mecano motors, Phoenix Mecano drives, Phoenix Mecano synchronous motors, Phoenix Mecano servo motors, Phoenix Mecano DC motors, Phoenix Mecano AC motors, Phoenix Mecano stepper motors, Phoenix Mecano synchronous motors, Phoenix Mecano asynchronous motors, Phoenix Mecano single-phase motors, Phoenix Mecano three-phase motors, Phoenix Mecano drive motors, Phoenix Mecano reduction motors, Phoenix Mecano electric motors. Phoenix Mecano products are original imports from Germany. Customers are welcome to inquire and order.