3SU1400-2AA10-3BA0 in stock. German 3SU1400-2AA10-3BA0 electrical components. 3SU1400-2AA10-3BA0 inventory.

3SU1400-2AA10-3BA0 electrical component is a photodetector that converts light into current or voltage signals depending on the mode of use. The die typically uses a PN junction with photosensitive characteristics, which is highly sensitive to changes in light, exhibits unidirectional conductivity, and changes its electrical properties with varying light intensity; therefore, the current in the circuit can be altered by adjusting the light intensity. Photodiodes are also known as photoelectric diodes. Photodiodes are similar in structure to semiconductor diodes; their die is a PN junction with photosensitive characteristics and unidirectional conductivity, so a reverse voltage must be applied during operation. In the absence of light, there is a very small saturated reverse leakage current, known as dark current, at which point the photodiode is cut off. When exposed to light, the saturated reverse leakage current increases significantly, forming a photocurrent that varies with the intensity of the incident light. When light irradiates the PN junction, it generates electron-hole pairs within the PN junction, increasing the density of minority carriers. These carriers drift under reverse voltage, causing the reverse current to increase. Therefore, the current in the circuit can be changed by varying the light intensity.

3SU1400-2AA10-3BA0 electrical component composition

A two-terminal electronic component made of resistive material with a specific structural form, used in circuits to limit current flow. Those with fixed resistance values are called fixed resistors. Those with variable resistance values are called potentiometers or variable resistors. An ideal resistor is linear, meaning the instantaneous current through the resistor is proportional to the applied instantaneous voltage. Some special resistors, such as thermistors, varistors, and sensitive elements, have a non-linear relationship between voltage and current. Resistors are the most numerous components used in electronic circuits and are typically available in various series based on power rating and resistance value for selection by circuit designers. In circuits, resistors are mainly used to adjust and stabilize current and voltage, serving as shunts and voltage dividers, or as matching loads. Depending on circuit requirements, they can also be used for negative or positive feedback in amplifier circuits, voltage-to-current conversion, or as voltage or current protection elements during input overload. They can also form RC circuits to serve as oscillation, filtering, bypass, differentiation, integration, and time constant elements.

3SU1400-2AA10-3BA0 electrical component characteristics

Dynamic characteristics refer to the output behavior of a sensor when the input changes. In practical applications, the dynamic characteristics of a sensor are often expressed by its response to certain standard input signals. This is because the sensor's response to standard input signals is easily determined experimentally, and there is a certain relationship between its response to standard input signals and its response to arbitrary input signals; often, knowing the former allows inference of the latter. The most commonly used standard input signals are step signals and sinusoidal signals, so the dynamic characteristics of sensors are also commonly expressed by step response and frequency response.

3SU1400-2AA10-3BA0 electrical component characteristics

Sensitivity refers to the ratio of the change in output to the change in input of a sensor under steady-state operating conditions. It is the slope of the output-input characteristic curve. If the relationship between the sensor's output and input is explicitly linear, then the sensitivity S is a constant. Otherwise, it will vary with changes in the input quantity. The dimension of sensitivity is the ratio of the dimensions of the output and input quantities. When the dimensions of the sensor's output and input quantities are the same, sensitivity can be understood as the amplification factor. Increasing sensitivity yields higher measurement precision. However, the higher the sensitivity, the narrower the measurement range, and stability is often poorer.

Weidou Intelligent Technology specializes in selling German 3SU1400-2AA10-3BA0 connectors, 3SU1400-2AA10-3BA0 switches, 3SU1400-2AA10-3BA0 relays, 3SU1400-2AA10-3BA0 controllers, 3SU1400-2AA10-3BA0 plugs, 3SU1400-2AA10-3BA0 sensors, 3SU1400-2AA10-3BA0 resistors, 3SU1400-2AA10-3BA0 capacitors, 3SU1400-2AA10-3BA0 buses, 3SU1400-2AA10-3BA0 modules, 3SU1400-2AA10-3BA0 cables, 3SU1400-2AA10-3BA0 power supplies, 3SU1400-2AA10-3BA0 interfaces, 3SU1400-2AA10-3BA0 gateways, 3SU1400-2AA10-3BA0 circuit breakers, 3SU1400-2AA10-3BA0 original imports from Germany. Customers are welcome to inquire and place orders.