Datalogic electrical components Germany Datalogic model Datalogic price

Datalogic electrical components are semiconductor transistors, also known as bipolar junction transistors or crystal triodes, which are semiconductor devices that control current. Their function is to amplify weak signals into electrical signals with larger amplitudes, and they are also used as contactless switches. Transistors are one of the basic semiconductor components, have current amplification capabilities, and are core components of electronic circuits. A transistor is made by fabricating two closely spaced PN junctions on a single semiconductor substrate; these two PN junctions divide the entire semiconductor into three parts: the middle part is the base region, and the two side parts are the emitter region and the collector region. The arrangement types include PNP and NPN.

Datalogic electrical component parameters

(1) Nominal capacitance is the capacitance marked on the capacitor. However, there is a deviation between the actual capacitance of the capacitor and the nominal capacitance; the accuracy class corresponds to the allowable error. General capacitors commonly use classes I, II, and III, while electrolytic capacitors use classes IV, V, and VI to indicate capacitance accuracy, selected according to application. The capacitance value of an electrolytic capacitor depends on the impedance presented when operating under AC voltage; the capacitance value changes with variations in operating frequency, temperature, voltage, and measurement method. The unit of capacitance is F (Farad). Since a capacitor is a "container" for storing electric charge, there is the issue of "capacity" size. To measure the ability of a capacitor to store electric charge, the physical quantity of capacitance is defined. A capacitor can only store electric charge under the action of an applied voltage. Different capacitors may store different amounts of charge under voltage action. Internationally, it is uniformly stipulated that when a DC voltage of 1 volts is applied to a capacitor, the amount of charge it can store is the capacitance of that capacitor (i.e., the charge per unit voltage), represented by the letter C. The basic unit of capacitance is the Farad (F). (2) Rated voltage is the maximum DC voltage that can be continuously applied to the capacitor at the minimum and rated ambient temperatures. If the operating voltage exceeds the withstand voltage of the capacitor, the capacitor will break down, causing damage. In practice, as the temperature rises, the withstand voltage value will decrease. (3) Insulation resistance. When DC voltage is applied to the capacitor, leakage current is generated; the ratio between the two is called insulation resistance. When the capacitance is small, its value mainly depends on the surface state of the capacitor; generally, the higher the insulation resistance, the better. (4) Loss. The energy consumed due to heating per unit time when the capacitor is under the action of an electric field is called loss. Loss is related to frequency range, dielectric material, conductance, and the resistance of the metal parts of the capacitor. (5) Frequency characteristics. As the frequency increases, the capacitance of general capacitors tends to decrease. When the capacitor operates below its resonant frequency, it exhibits capacitive behavior; when it exceeds its resonant frequency, it exhibits inductive behavior, at which point it is no longer a capacitor but an inductor. Therefore, it is essential to avoid operating the capacitor above its resonant frequency.

Datalogic electrical component principle

It is a contactless switching device with relay characteristics that uses semiconductor devices to replace traditional electrical contacts as the switching mechanism. A single-phase solid-state relay is a four-terminal active device, with two input control terminals and two output terminals. There is optical isolation between the input and output. When a DC or pulse signal is applied to the input terminal and reaches a certain current value, the output terminal switches from the off state to the on state. AC solid-state relays are classified by switching method into zero-crossing conduction type and random conduction type; by output switching element into triac output type and anti-parallel SCR output type. By installation method, they are classified into pin-type for printed circuit boards and chassis-mounted type fixed on metal baseplates. Solid-state relays can be divided into zero-voltage type and phase-control type based on the triggering form.

Datalogic electrical component function

The main functions of potentiometers in circuits include several aspects: 1. Used as a voltage divider. A potentiometer is a continuously adjustable resistor. When adjusting the knob or slider of the potentiometer, the movable contact slides on the resistive body. At this time, an output voltage related to the applied voltage and the angle or travel of the movable arm can be obtained at the output terminal of the potentiometer. 2. Used as a rheostat. When a potentiometer is used as a rheostat, it should be connected as a two-terminal device, so that a smoothly and continuously changing resistance value can be obtained within the travel range of the potentiometer. 10. Used as a current controller. When a potentiometer is used as a current controller, one of the selected current output terminals must be the terminal led out from the sliding contact.

Weidou Intelligent Technology professionally sells German Datalogic connectors, Datalogic switches, Datalogic relays, Datalogic controllers, Datalogic plugs, Datalogic sensors, Datalogic resistors, Datalogic capacitors, Datalogic buses, Datalogic modules, Datalogic cables, Datalogic power supplies, Datalogic interfaces, Datalogic gateways, Datalogic circuit breakers, Datalogic original imports from Germany. Welcome customers to inquire and order.