eutrac electrical components Germany eutrac model eutrac price

eutrac electrical components are wires that transmit current. Usually, current transmission is point-to-point. Power cords can be divided into AC AC power cords and DC DC power cords according to their use. Usually, AC power cords are wires that carry high-voltage alternating current. Due to the high voltage, these wires require unified standards and safety certification before they can be officially produced. DC cords basically carry low-voltage direct current, so the safety requirements are not as strict as those for AC cords. However, for safety reasons, countries still require unified safety certification.

eutrac electrical components classification

1, classified by operating nature, can be divided into transmitting antennas and receiving antennas. 2, classified by use, can be divided into communication antennas, broadcast antennas, television antennas, radar antennas, etc. 3, classified by directionality, can be divided into omnidirectional antennas and directional antennas, etc. 4, classified by operating wavelength, can be divided into ultra-long wave antennas, long wave antennas, medium wave antennas, short wave antennas, ultra-short wave antennas, microwave antennas, etc. 5, classified by structural form and working principle, can be divided into wire antennas and surface antennas, etc. Characteristic parameters describing antennas include radiation pattern, directivity coefficient, gain, input impedance, radiation efficiency, polarization, and bandwidth. 6, classified by dimension, can be divided into two types: ① One-dimensional antennas consist of many wires, which are either straight like those used in mobile phones, or have clever shapes, like the old rabbit ear antennas used on televisions before cable appeared. Monopole and dipole antennas are the two most basic one-dimensional antennas. ② Two-dimensional antennas: diverse variations, including patch (a square piece of metal), array (an organized two-dimensional pattern of patches), horn, and dish. 18, antennas can be divided into three categories based on usage scenarios: handheld radio antennas, vehicle-mounted antennas, and base station antennas. Handheld radio antennas: antennas for personal use with handheld transceivers, commonly rubber antennas and telescopic antennas. Vehicle-mounted antennas: communication antennas originally designed for installation on vehicles, with suction cup antennas being the most common and widely used. Vehicle-mounted antenna structures also include shortened, quarter-wavelength, center-loaded, five-eighths wavelength, and double half-wavelength antennas. Base station antennas: play a very key role in the entire communication system, especially as communication hubs. Commonly used base station antennas include fiberglass high-gain antennas, four-ring array antennas (eight-ring array antennas), and directional antennas

eutrac electrical components structure

1. The cathode of an electron tube is the component used to emit electrons, divided into oxide cathodes and thoriated tungsten carbide cathodes. Generally, oxide cathodes are indirectly heated; they use a dedicated filament to heat the cathode body coated with barium oxide, etc., for thermionic emission. Thoriated tungsten carbide cathodes are generally directly heated; thermionic emission is generated by heating, so it serves as both the filament and the cathode. Theoretically, thoriated tungsten carbide cathodes have a much longer lifespan than oxide cathodes. Thoriated tungsten carbide cathodes are most widely used in high-power transmitter tubes, while oxide cathodes are generally used in transmitter tubes with output power below 1kW. Mesh cathodes are made into cylindrical shapes using thinner thoriated tungsten wires. Their advantages are: ① Because they are woven from many thoriated tungsten wires, the conduction coefficient is larger. ② It is easy to achieve smaller cathode-grid spacing, which helps improve transconductance. ③ Because the filament has a mesh structure, the current in a single filament is smaller, the local magnetic field is weaker, and thus the AC hum generated by the cathode current is also smaller. 2. The grids of electron tubes are divided into first grid and second grid based on their roles in the tube, sometimes also called control grid and screen grid. The main role of the first grid is to control cathode current, and the role of the second grid is to shield the influence of the plate on the first grid. The grid structure relates to its own mechanical strength and heat dissipation effect, and relates to whether the tube can work stably. To reduce electron transit time, the grid-cathode spacing is made very short, even less than 1mm, so manufacturers mostly use materials with high mechanical strength, high thermal conductivity, good radiation coefficient, and high melting point to make the grid, to avoid thermal contact between electrodes at such small spacing. The first grid and second grid should be strictly aligned, so that the screen grid captures fewer electrons, reducing screen grid loss, improving current distribution and linearity. 6. The anode of an electron tube is the electrode that collects most of the electrons emitted by the cathode. When the electron tube is working, due to electron bombardment of the plate surface and thermal radiation from other electrodes, a large amount of heat energy is generated at the plate. Because the power dissipation density of the plate is tens to hundreds of watts per square centimeter, natural radiation or conductive cooling cannot handle such high power density. Therefore, forced cooling methods must be used. Common methods include air cooling, water cooling, and evaporative cooling.

eutrac electrical components function

The main uses of disconnect switches (knife switches) are: 1, to isolate the power supply, disconnecting high-voltage maintenance equipment from live equipment, creating a clearly visible break point between them. 2, disconnect switches cooperate with circuit breakers to perform switching operations according to the needs of system operation modes, changing the system wiring configuration. 3, to connect or disconnect low-current circuits. Disconnect switches can perform the following operations: pull and close bypass currents of loop switches; pull and close grounding wires of transformer neutral points, but when arc suppression coils are connected to the neutral point, operation is only allowed when the system is fault-free; pull and close voltage transformers and lightning arresters; pull and close capacitive currents of busbars and equipment directly connected to busbars; pull and close no-load lines with capacitive current not exceeding 5 amperes; triple disconnect switches can pull and close loads with voltage at 10 kilovolts and below, and current below 17 amperes. When operating disconnect switches, note that when energizing a line, first close the busbar-side disconnect switch, then the line-side disconnect switch, and finally the circuit breaker. When de-energizing a line, first open the circuit breaker, then open the disconnect switch. Do not pull or close high-voltage disconnect switches under load.

Weidou Intelligent Technology professionally sells German eutrac connectors, eutrac switches, eutrac relays, eutrac controllers, eutrac plugs, eutrac sensors, eutrac resistors, eutrac capacitors, eutrac buses, eutrac modules, eutrac cables, eutrac power supplies, eutrac interfaces, eutrac gateways, eutrac circuit breakers, eutrac original imports from Germany. Welcome customers to inquire and order.