Gunther electrical components German Gunther models Gunther prices

Gunther electrical components are varactor diodes, also known as "variable reactance diodes," manufactured using the characteristic that the junction capacitance of a PN junction under reverse bias varies with the applied voltage. As the reverse bias voltage increases, the junction capacitance decreases; conversely, it increases. The capacitance of varactor diodes is generally small, with maximum values ranging from tens of pF to hundreds of pF. They are mainly used in high-frequency circuits for automatic tuning, frequency modulation, and phase adjustment, for example, as variable capacitors in the tuning circuits of television receivers. Main parameters include: zero-bias junction capacitance, zero-bias quality factor, reverse breakdown voltage, center reverse bias voltage, nominal capacitance, capacitance variation range (in picofarads), and cutoff frequency.

Gunther electrical component parameters

The main parameters of transistors include current amplification factor, dissipation power, frequency characteristics, maximum collector current, maximum reverse voltage, and reverse current. Amplification factor: The DC current amplification factor, also known as the static current amplification factor or DC amplification ratio, refers to the ratio of the transistor collector current to the base current when there is no changing signal input in the static state. AC amplification factor: The AC amplification factor, also known as the AC current amplification factor or dynamic current amplification factor, refers to the ratio of the change in transistor collector current to the change in base current under AC conditions. Dissipation power: Dissipation power, also known as the maximum allowable collector dissipation power PCM, refers to the maximum collector dissipation power when transistor parameter changes do not exceed specified allowable values. Dissipation power is closely related to the transistor's maximum allowable junction temperature and maximum collector current. During use, the actual power consumption of the transistor must not exceed the PCM value; otherwise, the transistor will be damaged due to overload. When the transistor's operating frequency exceeds the cutoff frequency, its current amplification factor will decrease as the frequency rises. The maximum oscillation frequency refers to the frequency at which the transistor's power gain drops to 2. Typically, the maximum oscillation frequency of high-frequency transistors is lower than the common-base cutoff frequency, while the characteristic frequency is higher than the common-base cutoff frequency but lower than the common-collector cutoff frequency. Maximum current: The maximum collector current refers to the maximum current allowed to pass through the transistor collector. Maximum reverse voltage: The maximum reverse voltage refers to the highest operating voltage allowed to be applied to the transistor during operation. It includes the collector-emitter reverse breakdown voltage, collector-base reverse breakdown voltage, and emitter-base reverse breakdown voltage. Collector reverse breakdown voltage refers to the maximum allowable reverse voltage between the collector and emitter when the transistor base is open. Base reverse breakdown voltage refers to the maximum allowable reverse voltage between the collector and base when the transistor emitter is open. Emitter reverse breakdown voltage refers to the maximum allowable reverse voltage between the emitter and base when the transistor collector is open. The reverse current between the bases, also known as the collector junction reverse leakage current, refers to the reverse current between the collector and base when the transistor emitter is open. The reverse breakdown current between the emitters refers to the reverse leakage current between the collector and emitter when the transistor base is open, also known as the penetration current. The smaller this current value, the better the transistor performance.

Gunther electrical component characteristics

The static characteristics of a sensor refer to the relationship between the output and input quantities for static input signals. Since the input and output quantities are independent of time in this case, their relationship, i.e., the static characteristics of the sensor, can be described by an algebraic equation without time variables, or by a characteristic curve plotted with the input quantity as the abscissa and the corresponding output quantity as the ordinate. The main parameters characterizing the static characteristics of sensors include: linearity, sensitivity, hysteresis, repeatability, and drift. (1) Linearity: Refers to the degree to which the actual relationship curve between the sensor output and input deviates from the fitted straight line. It is defined as the ratio of the maximum deviation between the actual characteristic curve and the fitted straight line over the full scale range to the full-scale output value. (2) Sensitivity: Sensitivity is an important indicator of the static characteristics of a sensor. It is defined as the ratio of the increment in the output quantity to the corresponding increment in the input quantity that causes this increment. S is used to denote sensitivity. (3) Hysteresis: Hysteresis is the phenomenon where the input-output characteristic curves do not coincide when the sensor input changes from small to large (forward stroke) and from large to small (reverse stroke). For input signals of the same magnitude, the output signals for the forward and reverse strokes are unequal; this difference is called the hysteresis difference. (4) Repeatability: Repeatability refers to the degree of inconsistency in the characteristic curves obtained when the sensor input undergoes continuous multiple full-scale changes in the same direction. (5) Drift: Sensor drift refers to the phenomenon where the sensor output changes over time while the input remains constant. There are two causes of drift: one is the sensor's own structural parameters; the other is the surrounding environment (such as temperature, humidity, etc.). (6) Resolution: When the sensor input slowly increases from a non-zero value, the output undergoes an observable change after exceeding a certain increment; this input increment is called the sensor resolution, i.e., the minimum input increment. (7) Threshold: When the sensor input slowly increases from zero, the output undergoes an observable change after reaching a certain value; this input value is called the sensor threshold voltage.

Gunther electrical component functions

Controlling high power, capable of controlling hundreds of kilowatts of power, using power transistors as switches has many advantages, primarily easy turn-off and fewer required auxiliary components. Fast switching allows operation at high frequencies. Transistor compounding (Darlington) and parallel connection are effective methods to increase transistor switching capability. In such high-power circuits, the main problem is wiring. Very high switching speeds can generate significant interference voltages even on short connection lines. Simple and optimized base drive achieves high performance. The base drive circuit not only drives the power transistor but also protects it, referred to as "decentralized protection" (as opposed to centralized protection). Functions of integrated drive circuits include: turning on and off the power switch, monitoring auxiliary supply voltage, limiting maximum and minimum pulse widths, thermal protection, and monitoring the switch saturation voltage drop.

Weidou Intelligent Technology specializes in selling German Gunther connectors, Gunther switches, Gunther relays, Gunther controllers, Gunther plugs, Gunther sensors, Gunther resistors, Gunther capacitors, Gunther buses, Gunther modules, Gunther cables, Gunther power supplies, Gunther interfaces, Gunther gateways, Gunther circuit breakers, Gunther original imports from Germany. Customers are welcome to inquire and order.