INGEOPAVA electrical components Germany INGEOPAVA model INGEOPAVA price

INGEOPAVA electrical components are products whose raw material molecular composition is not changed during factory processing, and can be called components. Components belong to devices that do not require energy. They include: resistors, capacitors, and inductors. Circuit-type components include diodes and resistors; connection-type components include connectors, sockets, connecting cables, and printed circuit boards (PCB). Devices are products whose raw material molecular structure is changed during factory production and processing. Devices are divided into active devices and discrete devices. The main characteristic of active devices is that they consume electrical energy and require an external power source. Discrete devices are divided into bipolar junction transistors, field-effect transistors, thyristors, semiconductor resistors, and capacitors. shi

INGEOPAVA electrical component functions

The starter solenoid switch is a key component of the starter motor, and its design quality directly affects the reliability of the starter. The starter solenoid switch has two functions: first, to connect the main circuit to make the starter rotate; second, to push out the drive gear via the shift fork to engage with the engine flywheel ring gear. Therefore, the solenoid switch is required to have corresponding suction force, corresponding stroke, and contacts capable of reliably switching high currents. Additionally, it is required to minimize volume and weight as much as possible. Based on these characteristics, the contact structure of the solenoid switch generally adopts a contact form, i.e., the moving contact is made into a bridge shape or disc shape to provide a larger heat dissipation surface and thermal capacity. The magnetic system mostly adopts a solenoid electromagnet structure to meet the requirements of corresponding stroke, corresponding suction force, small volume, and light weight. The moving iron core of the solenoid switch can move smoothly within the brass bushing equipped with a solenoid coil. The moving iron core pull rod is connected to the shift fork and one-way clutch. Under the action of the return spring, the moving iron core remains in the non-operating initial position. During starting, the starter drive gear needs to move forward by approximately 12-24mm. Therefore, when the solenoid switch begins to engage, a large magnetomotive force is required to generate the necessary initial suction force. After engagement, the air gap decreases, and the electromagnetic suction force increases sharply, greatly exceeding the force required to maintain the engaged state. For this reason, the solenoid switch uses two coils (an attraction coil and a holding coil). Initially, both the attraction coil and the holding coil jointly generate electromagnetic suction force. After the switch contacts engage, the attraction coil automatically disengages from the operating state, and only the holding coil maintains the switch in the engaged state. The holding coil current is relatively small and can be wound with thinner wire, which not only reduces the volume of the solenoid switch but also achieves reasonable suction force matching. To ensure the reliability of the starter, emphasis must be placed on controlling the design quality of the solenoid switch.

INGEOPAVA electrical component structure

Inductors are generally composed of a bobbin, winding, shield, encapsulation material, and magnetic core or iron core. 1, Bobbin: The bobbin refers to the support for winding the coil. Most large-volume fixed inductors or adjustable inductors (such as oscillator coils and choke coils) have enameled wire (or silk-covered wire) wound around the bobbin, and then a magnetic core, copper core, or iron core is inserted into the inner cavity of the bobbin to increase its inductance. Bobbins are usually made of plastic, bakelite, or ceramic, and can be made into different shapes according to actual needs. Small inductors (such as color-coded inductors) generally do not use a bobbin but instead wind the enameled wire directly onto the magnetic core. Air-core inductors (also known as former-less coils or air-core coils, mostly used in high-frequency circuits) do not use a magnetic core, bobbin, or shield; instead, they are wound on a mold first, then the mold is removed, and a certain distance is maintained between the turns of the coil. 2, Winding: The winding refers to a set of coils with specified functions and is the basic component of an inductor. Windings are divided into single-layer and multi-layer types. Single-layer windings have two forms: close-wound (where wires are wound turn by turn adjacent to each other) and spaced-wound (where a certain distance is maintained between each turn of wire during winding); multi-layer windings include layered flat winding, random winding, honeycomb winding, and other methods. 3, Magnetic Core and Magnetic Rod: Magnetic cores and magnetic rods are generally made of materials such as nickel-zinc ferrite or manganese-zinc ferrite. They come in various shapes such as "I" shape, cylindrical, cap-shaped, "E" shape, and pot shape. 4, Iron Core: Iron core materials mainly include silicon steel sheets and permalloy, and their shape is mostly "E" type. 5, Shield: To prevent the magnetic field generated by some inductors during operation from affecting the normal operation of other circuits and components, a metal shield is added (such as the oscillator coil of a semiconductor radio). Inductors with shields will increase coil loss, reducing the Q value. 14, Encapsulation Material: Some inductors (such as color-coded inductors and color-ring inductors) are sealed with encapsulation material after winding to enclose the coil and magnetic core. The encapsulation material uses plastic or epoxy resin.

INGEOPAVA electrical component classification

Common classifications of inductor coils in circuits include the following: Classification by inductance form: fixed inductance, variable inductance. Classification by magnetic conductor properties: air-core coils, ferrite coils, iron-core coils, copper-core coils. Classification by operating nature: antenna coils, oscillator coils, choke coils, trap coils, deflection coils. Classification by winding structure: single-layer coils, multi-layer coils, honeycomb coils, close-wound coils, spaced-wound coils, former-less coils, honeycomb coils, random-wound coils.

Weidou Intelligent Technology professionally sells German INGEOPAVA connectors, INGEOPAVA switches, INGEOPAVA relays, INGEOPAVA controllers, INGEOPAVA plugs, INGEOPAVA sensors, INGEOPAVA resistors, INGEOPAVA capacitors, INGEOPAVA buses, INGEOPAVA modules, INGEOPAVA cables, INGEOPAVA power supplies, INGEOPAVA interfaces, INGEOPAVA gateways, INGEOPAVA circuit breakers, INGEOPAVA original imports from Germany. Welcome customers to inquire and order.