aeg electrical components Germany aeg model aeg price

aeg electrical components are active-matrix liquid crystal displays driven by thin-film transistors. They primarily use current to stimulate liquid crystal molecules to generate points, lines, and planes, which combine with backlights to form images. IPS, TFT, and SLCD are all subclasses of LCD. Their operating principle is that, under the action of an electric field, the alignment direction of liquid crystal molecules changes, altering the transmittance (modulation) of external light sources to complete electro-optical conversion. Then, using different excitations of the R, G, and B primary color signals through red, green, and blue color filter films, color reproduction in the time and spatial domains is completed.

aeg electrical component structure

Generators are typically composed of components such as the stator, rotor, end covers, and bearings. The stator consists of the stator core, wire windings, frame, and other structural parts that secure these components. The rotor consists of the rotor core (or magnetic poles, yoke), windings, retaining rings, centering rings, slip rings, fan, and shaft. Bearings and end covers connect and assemble the generator's stator and rotor, allowing the rotor to rotate within the stator, cutting magnetic flux lines to generate induced electromotive force. This is led out through terminal blocks and connected to the circuit, thereby generating current.

aeg electrical component classification

Circuit breakers are classified by number of poles: single-pole, two-pole, three-pole, and four-pole; and by installation method: plug-in, fixed, and draw-out.

aeg electrical component principle

Resistors consist of three parts: the resistive element, the substrate, and the leads (for solid-core resistors, the resistive element and substrate are combined into one), with only the resistive element determining the resistance value. The volt-ampere characteristic is represented by a graphical curve showing the relationship between voltage and current at the resistor terminals. When voltage and current are proportional (the characteristic is a straight line), it is called a linear resistor; otherwise, it is called a non-linear resistor. The maximum power dissipation allowed for continuous operation of the resistor at the rated temperature (maximum ambient temperature) tR. For each type of resistor, a maximum working voltage is also specified; that is, when the resistance value is high, the maximum working voltage must not be exceeded even if the rated power has not been reached. The rated power of a resistor refers to the maximum power allowed to be consumed during long-term continuous operation in DC or AC circuits. Load characteristics: When the ambient operating temperature is below tR, the resistor must not exceed its rated power; when exceeding tR, the load power must be derated. Each type of resistor has specified load characteristics. In addition, the allowable load is correspondingly reduced under low atmospheric pressure. Under pulse load conditions, the average pulse power is far lower than the rated power, and separate specifications generally apply.

Weidou Intelligent Technology specializes in selling German aeg connectors, aeg switches, aeg relays, aeg controllers, aeg plugs, aeg sensors, aeg resistors, aeg capacitors, aeg buses, aeg modules, aeg cables, aeg power supplies, aeg interfaces, aeg gateways, aeg circuit breakers, aeg original imports from Germany. Customers are welcome to inquire and order.