hein electrical components Germany hein model hein price

hein electrical components are electronic devices with conductivity between that of good conductors and insulators, utilizing the special electrical properties of semiconductor materials to perform specific functions. They can be used to generate, control, receive, transform, and amplify signals, as well as perform energy conversion. The semiconductor materials in semiconductor devices are silicon, germanium, or gallium arsenide, which can be used as rectifiers, oscillators, light emitters, amplifiers, photodetectors, and other equipment. To distinguish them from integrated circuits, they are sometimes referred to as discrete devices. The basic structure of most two-terminal devices (i.e., crystal diodes) is a PN junction. Semiconductor devices typically utilize different semiconductor materials, processes, and geometric structures. A wide variety of crystal diodes with diverse functions and applications have been developed. The frequency coverage of crystal diodes ranges from low frequency, high frequency, microwave, millimeter wave, and infrared to light waves. Three-terminal devices are generally active devices, with typical representatives being various transistors (also known as crystal triodes). Transistors can be divided into bipolar junction transistors and field-effect transistors. Depending on the application, transistors can be classified into power transistors, microwave transistors, and low-noise transistors. In addition to general-purpose transistors used for amplification, oscillation, and switching, there are transistors for special purposes, such as phototransistors, magnetosensitive transistors, and field-effect sensors. These devices can convert information about environmental factors into electrical signals and also provide amplification like general transistors to obtain larger output signals. Furthermore, there are some special devices, such as unijunction transistors that can be used to generate sawtooth waves, thyristors that can be used in various high-current control circuits, and charge-coupled devices that can be used as imaging devices or information storage devices. In military equipment such as communications and radar systems, weak signals are mainly received by highly sensitive, low-noise semiconductor receiving devices. With the rapid development of microwave communication technology, low-noise microwave semiconductor devices have developed rapidly, with increasing operating frequencies and decreasing noise figures. Due to their excellent performance, small size, light weight, and low power consumption, microwave semiconductor devices have been widely used in air defense and anti-missile systems, electronic warfare systems, and other applications.

hein electrical component structure

A bipolar junction transistor is made by fabricating two closely spaced PN junctions on a single semiconductor substrate. These two PN junctions divide the entire semiconductor into three parts: the base region in the middle, and the emitter and collector regions on either side. There are two arrangement types: PNP and NPN. Corresponding electrodes are drawn from the three regions: the base b, the emitter e, and the collector c. The PN junction between the emitter and base regions is called the emitter junction, and the PN junction between the collector and base regions is called the collector junction. The base region is very thin, while the emitter region is thicker with a high impurity concentration. In PNP type transistors, the emitter "emits" holes, whose movement direction is consistent with the current direction, so the emitter arrow points inward. In NPN type transistors, the emitter "emits" free electrons, whose movement direction is opposite to the current direction, so the emitter arrow points outward. The direction of the emitter arrow also indicates the conduction direction of the PN junction under forward voltage. Both silicon and germanium bipolar junction transistors come in PNP and NPN types. Transistor packaging and pin identification: Common transistor packages include metal and plastic types. The pin arrangement follows certain patterns. When viewed from the bottom with the three pins forming the vertices of an isosceles triangle, the order from left to right is e b c. For small and medium-power plastic transistors, when the flat side faces you and the three pins point downward, the order from left to right is e b c.

hein electrical component principle

The thermistor will remain in a non-tripped state for extended periods; when the ambient temperature and current are in the c region, the heat dissipation power of the thermistor is close to its heat generation power, so it may or may not trip. For a given ambient temperature, the tripping time of the thermistor decreases sharply as the current increases; at relatively higher ambient temperatures, the thermistor has a shorter tripping time and lower holding and tripping currents. The PTC effect refers to a material exhibiting the PTC effect, i.e., the positive temperature coefficient effect, meaning that the resistance of this material increases with rising temperature. For example, most metallic materials exhibit the PTC effect. In these materials, the PTC effect manifests as a linear increase in resistance with increasing temperature, which is commonly referred to as the linear PTC effect. Nonlinear PTC effect: Materials undergoing a phase transition exhibit a phenomenon where resistance increases sharply by several to more than ten orders of magnitude over a narrow temperature range, known as the nonlinear PTC effect. Many types of conductive polymers exhibit this effect, such as polymer PTC thermistors. These conductive polymers are very useful for manufacturing overcurrent protection devices. Polymer PTC thermistors are used for overcurrent protection and are often referred to as resettable fuses (hereinafter referred to as thermistors). Due to their unique positive temperature coefficient resistance characteristics, they are highly suitable as overcurrent protection devices. The method of using a thermistor is similar to that of a conventional fuse: it is connected in series in the circuit. When the circuit operates normally, the thermistor's temperature is close to room temperature and its resistance is very low, so connecting it in series does not hinder current flow. However, when an overcurrent occurs due to a fault, the increased heat generation causes the thermistor's temperature to rise. When the temperature exceeds the switching temperature, the resistance increases dramatically, rapidly reducing the current in the circuit to a safe value. After the thermistor trips, the current in the circuit drops significantly; t is the tripping time of the thermistor. Because polymer PTC thermistors offer good design flexibility, their temperature sensitivity can be adjusted by changing their switching temperature (ts), allowing them to provide both overtemperature and overcurrent protection. They are suitable for overcurrent and overtemperature protection of lithium-ion and nickel-metal hydride batteries. Influence of ambient temperature on polymer PTC thermistors: A polymer PTC thermistor is a direct-heating, step-type thermistor. Its resistance change process is related to its own heat generation and dissipation conditions; therefore, its holding current, tripping current, and tripping time are influenced by ambient temperature.

hein electrical component parameters

Key technical parameters of solid-state relays include: input voltage range, input current, turn-on voltage, turn-off voltage, reverse polarity voltage, rated output current, rated output voltage, output voltage, output leakage current, turn-on time, turn-off time, zero-crossing voltage, maximum surge voltage, electrical system peak, voltage rate of rise, operating temperature, ambient temperature range, dielectric withstand voltage, insulation resistance, electrical system peak, turn-off time, conduction time, output terminal leakage current, maximum on-state voltage transient overvoltage, maximum zero-crossing conduction voltage, power consumption, maximum surge current, minimum load current, maximum load current, output voltage range, minimum input impedance, reverse polarity voltage, input current, guaranteed turn-off voltage, guaranteed turn-on voltage, input voltage range.

Weidou Intelligent Technology specializes in selling German hein connectors, hein switches, hein relays, hein controllers, hein plugs, hein sensors, hein resistors, hein capacitors, hein buses, hein modules, hein cables, hein power supplies, hein interfaces, hein gateways, hein circuit breakers, hein original imports from Germany. We welcome inquiries and orders from customers.