maico electrical components Germany maico model maico price

maico electrical component is a photodetector that converts light into current or voltage signals depending on the mode of use. The die often uses a photosensitive PN junction, which is highly sensitive to changes in light, has unidirectional conductivity, and changes its electrical characteristics with different light intensities; therefore, the current in the circuit can be changed by varying the light intensity. Photodiodes are also called photoelectric diodes. Photodiodes are similar in structure to semiconductor diodes; their die is a photosensitive PN junction with unidirectional conductivity, so a reverse voltage must be applied during operation. When there is no illumination, there is a very small saturated reverse leakage current, i.e., dark current, at which point the photodiode is cut off. When exposed to light, the saturated reverse leakage current increases significantly, forming a photocurrent that varies with the intensity of the incident light. When light irradiates the PN junction, it generates electron-hole pairs in the PN junction, increasing the density of minority carriers. These carriers drift under reverse voltage, causing the reverse current to increase. Therefore, the current in the circuit can be changed by varying the light intensity.

maico electrical component principle

Lasing principle of laser diodes: The P-N junction in a laser diode is formed by two doped gallium arsenide layers. It has a parallel-end structure, parallel to one end mirror (highly reflective surface) and one partially reflective surface. The wavelength of the emitted light is directly related to the length of the junction. When the P-N junction is forward-biased by an external voltage source, electrons move through the junction and recombine as in ordinary diodes. When electrons recombine with holes, photons are released. These photons strike atoms, causing more photons to be released. As the forward bias current increases, more electrons enter the depletion region, leading to the emission of more photons. Eventually, some photons drifting randomly within the depletion region strike the reflective surfaces perpendicularly and are reflected back along their original paths. The reflected photons are again reflected from the other end of the junction. This movement of photons from one end to the other occurs continuously multiple times. During the photon movement, due to the avalanche effect, more atoms release more photons. This process of reflection and generation of increasing numbers of photons produces a very intense laser beam. Each photon generated in the emission process described above is identical to other photons in energy level, phase relationship, and frequency. Therefore, the emission process yields a laser beam of a single wavelength. To produce a laser beam, the current of the laser diode must exceed a certain threshold level. Currents below the threshold level force the diode to behave as an LED, emitting incoherent light.

maico electrical component characteristics

The so-called dynamic characteristics refer to the output characteristics of a sensor when the input changes. In practical work, the dynamic characteristics of a sensor are often expressed by its response to certain standard input signals. This is because the sensor's response to standard input signals is easy to obtain experimentally, and there is a certain relationship between its response to standard input signals and its response to arbitrary input signals; often, knowing the former allows inference of the latter. The most commonly used standard input signals are step signals and sinusoidal signals, so the dynamic characteristics of sensors are also commonly expressed by step response and frequency response.

maico electrical component structure

A thermopile is a pyroelectric infrared sensor, a device composed of thermocouples. It is widely used as a temperature detection device in fields such as ear thermometers, radiation thermometers, electric ovens, and food temperature detection. It consists of two or more thermocouples connected in series, with the thermoelectric potentials output by each thermocouple superimposing on each other. Used to measure small temperature differences or average temperatures. Structure of a thermopile: The radiation receiving surface is divided into several sections, each connected to a thermocouple; connecting them in series forms a thermopile. Depending on the application, practical thermopiles can be made in wire-type and thin-film types, as well as multi-channel and array-type devices.

Weidou Intelligent Technology specializes in selling German maico connectors, maico switches, maico relays, maico controllers, maico plugs, maico sensors, maico resistors, maico capacitors, maico buses, maico modules, maico cables, maico power supplies, maico interfaces, maico gateways, maico circuit breakers, maico original imports from Germany. Welcome customers to inquire and order.