PLASTLINENOVA electrical components Germany PLASTLINENOVA model PLASTLINENOVA price

PLASTLINENOVA electrical components are accessory products used to achieve electrical connections, classified industrially within the category of connectors. As industrial automation levels rise and industrial control requirements become increasingly strict and precise, the usage of terminal blocks is gradually increasing. With the development of the electronics industry, the scope of application for terminal blocks is expanding, and their varieties are becoming more diverse. Besides PCB board terminals, the most widely used types include hardware terminals, nut terminals, spring terminals, and so on.

PLASTLINENOVA electrical components features

It features a self-diagnostic stable operating zone indication function, which can promptly indicate whether the operating status is reliable; through-beam, retro-reflective, and mirror-reflective photoelectric switches all have anti-interference functions and are easy to install; settings at the control end allow pre-checking whether the photoelectric switch is working properly before operation. It can also receive interrupt or detection commands from a computer or programmable logic controller at any time. The appropriate combination of external diagnosis and self-diagnosis enables intelligence in photoelectric switches; fast response speed allows detection of tiny objects moving at high speeds; it uses specialized integrated circuits and advanced surface mount technology, offering high reliability; small size, light weight, simple installation and debugging, and short-circuit protection functionality.

PLASTLINENOVA electrical components principle

Potentiometric displacement sensors convert mechanical displacement into resistance or voltage output that has a linear or arbitrary functional relationship with the displacement via potentiometer elements. Ordinary linear potentiometers and circular potentiometers can be used as linear displacement and angular displacement sensors, respectively. However, potentiometers designed for measuring displacement require a definite relationship between displacement change and resistance change. The movable wiper of the potentiometric displacement sensor is connected to the measured object. The displacement of the object causes a change in resistance at the moving end of the potentiometer. The magnitude of the resistance change reflects the magnitude of the displacement, while an increase or decrease in resistance indicates the direction of displacement. Typically, a power supply voltage is applied across the potentiometer to convert the resistance change into a voltage output. In wire-wound potentiometers, the resistance changes in steps based on the turn-to-turn resistance as the wiper moves, resulting in a stepped output characteristic. If such a displacement sensor is used as a displacement feedback element in a servo system, excessive step voltages may cause system oscillation. Therefore, the resistance value per turn should be minimized during potentiometer manufacturing. Another major disadvantage of potentiometric sensors is their susceptibility to wear. Their advantages include: simple structure, large output signal, ease of use, and low cost.

PLASTLINENOVA electrical components classification

1. By application: pressure-sensitive and force-sensitive sensors, position sensors, level sensors, energy consumption sensors, speed sensors, acceleration sensors, radiation sensors, thermal sensors. 2. By principle: vibration sensors, humidity-sensitive sensors, magnetic-sensitive sensors, gas-sensitive sensors, vacuum sensors, biosensors, etc. 3. By output signal: (1) Analog sensors can convert the measured non-electrical quantities into analog electrical signals. (2) Digital sensors: convert the measured non-electrical quantities into digital output signals (including direct and indirect conversion). (3) Pseudo-digital sensors: convert the measured signal quantity into frequency signals or short-period signal outputs (including direct or indirect conversion). (4) Switch sensors: when a measured signal reaches a specific threshold, the sensor correspondingly outputs a set low-level or high-level signal. 4. By manufacturing process: Integrated sensors are manufactured using standard production processes for silicon-based semiconductor integrated circuits. Usually, part of the circuitry used for preliminary processing of the measured signal is also integrated on the same chip. Thin-film sensors are formed by depositing thin films of corresponding sensitive materials on a dielectric substrate (base plate). When using hybrid processes, part of the circuitry can also be fabricated on this substrate. Thick-film sensors are made by coating ceramic substrates with slurries of corresponding materials; the substrates are usually made of alumina, followed by heat treatment to form the thick film. Ceramic sensors are produced using standard ceramic processes or their variants (sol-gel, etc.). After appropriate preparatory operations, the formed components are sintered at high temperatures. There are many common characteristics between thick-film and ceramic sensor processes; in some aspects, thick-film technology can be considered a variant of ceramic technology. Each process has its own advantages and disadvantages. Due to lower capital investment required for research, development, and production, as well as the high stability of sensor parameters, it is more reasonable to use ceramic and thick-film sensors. 5. By measurement purpose: Physical sensors are made utilizing the characteristic that certain physical properties of the measured substance undergo significant changes. Chemical sensors are made using sensitive elements that can convert chemical quantities such as composition and concentration of chemical substances into electrical quantities. Biological sensors are made using various biological or biomaterial characteristics to detect and identify chemical components in living organisms. 6. By structure: (1) Basic sensors are the most fundamental single transduction devices. (2) Combined sensors are composed of different single transduction devices. (3) Application-specific sensors are composed of basic or combined sensors integrated with other mechanisms. 13. By mode of operation: Sensors can be classified into active and passive types based on their mode of operation. Active sensors include action-type and reaction-type. Such sensors emit a certain detection signal towards the object being measured, detecting changes in the detection signal caused by the object, or forming a signal through effects generated within the object by the detection signal. Those that detect changes in the detection signal are called action-type, while those that detect responses to form signals are called reaction-type. Radar and radio frequency detectors are examples of action-type, whereas photoacoustic effect analysis devices and laser analyzers are examples of reaction-type. Passive sensors only receive signals naturally emitted by the object being measured, such as infrared radiation thermometers and infrared imaging devices.

Weidou Intelligent Technology professionally sells German PLASTLINENOVA connectors, PLASTLINENOVA switches, PLASTLINENOVA relays, PLASTLINENOVA controllers, PLASTLINENOVA plugs, PLASTLINENOVA sensors, PLASTLINENOVA resistors, PLASTLINENOVA capacitors, PLASTLINENOVA buses, PLASTLINENOVA modules, PLASTLINENOVA cables, PLASTLINENOVA power supplies, PLASTLINENOVA interfaces, PLASTLINENOVA gateways, PLASTLINENOVA circuit breakers, PLASTLINENOVA original imports from Germany. Welcome customers to inquire and order.